Mitsubishi Heavy Industries eco touch RC-EX1A Guia de instalação

Categoria
Aquecedores de ambiente
Tipo
Guia de instalação

Este manual também é adequado para

eco touch REMOTE CONTROL
RC-EX1A/RC-EX1N
INSTALLATION MANUAL
PJZ012D077
B
4
5
Request
Be sure not to install R/C at a place where temperatures around the installation surface of R/C may differ largely from
actual room temperature.
Difference between detected temperature and actual room temperature could cause troubles.
The correction for detected temperature by the R/C cannot offset such temperature difference because it corrects the
detected temperatures itself.
Request
Do not install the R/C at a place where it is exposed to direct sunlight or where surrounding air temperature exceeds 40°C
or drops below 0°C.
It could cause discoloration, deformation, malfunction or breakdown.
Installation procedure
Dimensions (Viewed from front)
Take care to protect the removed upper case
from moisture or dust.
PCB side (Viewed from rear)
To remove the upper case from the bottom cases of R/C
· Insert the tip of flat head screwdriver or the like in the
recess at the lower part of R/C and twist it lightly to
remove.
Connect wires from X and Y terminals of R/C to X and Y
terminals of indoor unit.
R/C wires (X, Y) have no polarity.
In case of embedding wiring
(When the wiring is retrieved “Backward”)
Embed the switch box and the R/C wires beforehand.
Seal the inlet hole for the R/C wiring with putty.
If dust or insect enters, it could cause electric shocks,
fire or breakdown.
8
50
200
Wall
Conduit
Locknut
Switch box
Seal with putty
R/C cable
Wiring hole on bottom case
Bushing
Sensor
USB port
Terminal Block
37 23 23
Fixing holes
18.383.5
120
19
120
12
13
Main menu
R/C settings ( )
…………………………………………………………………… 20
Main/Sub of R/C ………………………………………………… 21
Return air temp…………………………………………………… 22
R/C sensor ……………………………………………………… 22
R/C sensor adjustment ………………………………………… 22
Operation mode ………………………………………………… 23
˚C / ˚F ……………………………………………………………… 23
Fan speed ………………………………………………………… 23
External input …………………………………………………… 24
Ventilation setting………………………………………………… 24
Flap control ……………………………………………………… 24
Auto-restart ……………………………………………………… 24
Auto temp setting………………………………………………… 25
Auto fan speed …………………………………………………… 25
IU settings ( )
…………………………………………………………………… 26
High ceiling ……………………………………………………… 28
Filter sign ………………………………………………………… 29
External input 1…………………………………………………… 29
External input 1 signal …………………………………………… 29
External input 2…………………………………………………… 29
External input 2 signal …………………………………………… 29
Heating thermo-OFF temp adjustment ……………………… 30
Return air sensor adjustment…………………………………… 30
Fan control in cooling thermo-OFF …………………………… 30
Fan control in heating thermo-OFF …………………………… 30
Anti-frost temp …………………………………………………… 31
Anti-frost control ………………………………………………… 31
Drain pump operation …………………………………………… 31
Residual fan operation in cooling ……………………………… 31
Residual fan operation in heating ……………………………… 32
Intermittent fan operation in heating…………………………… 32
Fan circulator operation ………………………………………… 32
Control pressure adjust ………………………………………… 32
Auto operation mode …………………………………………… 33
Thermo. rule setting……………………………………………… 36
Auto fan speed control ………………………………………… 37
IU overload alarm………………………………………………… 37
…………………………………………………………………… 38
Service & Maintenance ( )
IU address ………………………………………………………… 39
Next service date ………………………………………………… 39
Operation data …………………………………………………… 40
Error display ……………………………………………………… 41
Saving IU settings ……………………………………………… 42
Special settings ………………………………………………… 44
…………………………………………………………………… 46
Select the language
Installation settings ( )
…………………………………………………………………… 15
Installation date ………………………………………………… 16
Company information …………………………………………… 16
Test run …………………………………………………………… 17
Static pressure adjustment …………………………………… 18
Change auto-address …………………………………………… 18
Address setting of main IU ……………………………………… 18
IU back-up function ……………………………………………… 19
(
) It is necessary to input the Service password for menu items showing.
14
15
Tap the
Menu
button on the TOP screen.
6. Installation settings
Installation settings cover the following items.
(1) Installation date: Register the date when the unit was installed.
(2) Company information: Enter the information of contact for service.
(3) Test run: Cooling test run, drain pump test run or compressor Hz fixed operation is performed.
(4) Static pressure adjustment: Static pressure is adjusted in case of connecting the duct type IU equipped with
the external static pressure adjustment function.
(5) Change auto-address: In case of the Multi Series (KX) models, the IU address can be changed after the auto-
address setting.
(6) Address setting of main IU: In case of the Multi Series (KX) models, set the address of main/sub IU to prevent
from mixing operation modes (Cooling, heating).
(7) IU back-up function: IU rotation, IU capacity back-up, IU fault back-up are set.
②③
Main menu screen is displayed.
Tap the “Installation settings” button on the menu screen.
Display the service password input screen.
Enter the service password (4-digit number).
The service password is “9999”. (Unable to change)
TOP screen
Menu screen
Menu screen #2
S
ervice password input
16
17
Enter the Phone No. of the contact.
Tap the
Set
button after the input.
Test run
Select a test run item to be implemented.
(a) Cooling test run: Operation can be made only in cooling mode.
(b) Drain pump test run
(c) Compressor Hz fixed operation: Setting can be made when the unit is
stopped. This operation starts by operation procedure of the unit.
Enter the Phone No. of the contact
Test run
12
13
14
Cooling test run
When the room temperature is too low to start the cooling test run, it operates
for 30 minutes by decreasing the set temperature to 5°C.
Drain pump test run
Drain pump can be operated independently.
Compressor Hz fixed operation
Compressor operation frequency of the inverter outdoor unit can be fixed. It
may not be able to control effectively depending on the outdoor unit models.
Cooling test run
Drain pump test run
Compressor Hz xed operation
18
19
Static pressure adjustment
This is operable in case of connecting duct type IU equipped with the external
static pressure adjustment function.
Operating method is described in the installation manuals for the indoor units
with this function.
Static pressure adjustment
⑯⑰
Change auto-address
In case of Multi series (KX) models, the IU addresses registered with the auto-
address setting method can be changed with this function .
When an indoor unit is selected and the
Change
button is tapped, the display
changes to the Change auto-address screen
. When the address is changed
with
buttons and the
Set
button is tapped, it returns to
the Change auto-address screen
on which the new address is displayed.
Tap the
Finish
button to register the new address.
Address setting of main IU
In case of Multi Series (KX) models, it is possible to let indoor units (Sub IUs)
follow the operation mode (Heating, cooling) of the indoor unit (Main IU).
Set the address of the Main IU to the Sub IUs which shall be followed to the
Main IU by using each R/C connected to each Sub IU.
In case of the single PAC unit, or the plural indoor units connected to one R/C,
it is not available to operate.
Setting can be made from the main R/C of Sub IU only. It cannot be set from
the sub R/C of Sub IU.
Change auto-address
Change auto-address
Address setting of main IU
22
23
Return air temp
Thermo. rule* is applied based on the temperature detected with the return air
temp sensor of IU.
When plural indoor units are connected to one R/C, the return air temp applied
to the thermo. rule* can be selected.
Individual: Thermo. rule* is applied based on the return air temp of each IU.
When plural units are connected to one R/C, it is based on the
return air temp of the main unit.
Master IU: Thermo. rule* is applied based on the return air temp of IU having
the youngest address out of IUs connected.
If there are several sets of plural units each of which is connected
to one R/C, it is based on the IU having the youngest address out of
the main units of each plural units.
Averaged temp: Thermo. rule* is applied based on the average of return air
temperatures of IUs connected.
* “Thermo. rule” means the “Judging to make thermostat ON or OFF” by
detecting temperature.
R/C sensor
Thermo. rule* is applied based on the temp detected with the R/C sensor.
Enable: Thermo. rule* is applied based on the temp detected with the R/C
sensor in all operation modes.
Enable (Heating only): Thermo. rule* is applied based on the temp detected
with the R/C sensor in heating operation only. In case of other
operation modes (including auto-heating mode), it is based on the
Individual control of return air temperature.
Enable (Cooling only): Thermo. rule* is applied based on the temp detected
with the R/C sensor, excepted in heating operation. In case of heating
modes, it is based on the Individual control of return air temperature.
* “Thermo. rule” means the “Judging to make thermostat ON or OFF” by
detecting temperature.
R/C sensor
Return air temp
R/C sensor adjustment
Temperatures detected with the R/C sensor can be adjusted.
Set this within the range of -3 to +3. (At 1°C intervals)
Adjustment in cooling
Adjustment in heating
R/C sensor adjustment
12
13
24
25
External input
Set the range to apply the external input received through CNT of either one IU
to plural indoor units connected in one system
Individual: This is applied only to the IU receiving CNT input.
All units: This is applied to all indoor units connected.
Ventilation setting
Set this when a ventilation device is connected.
Disable: No ventilation device is connected.
Interlocking: Ventilation is interlocked with the Run/Stop of air conditioner.
Independent: If the ventilation is selected from the menu, only the
ventilation device is operated or stopped independently.
External input
Ventilation setting
Flap control
Set the flap stop control.
Stop at fixed position: The flap can be set to stop at one of 4 positions.
Stop at any position: The flap can be set to stop at any position
immediately after operating the R/C switch.
Auto-restart
Set the state of operation to be started when the power supply is restored
after a power failure.
Enable: It returns to the state before the power failure as soon as the
power supply is restored (After the end of the primary control at
the power on).
Disable: It stops after the restoration of power supply, regardless the state
of operation before the power failure.
Flap control
Auto-restart
28
29
Filter sign
Set the time to display the filter sign.
External input 1
Set the control at the time when the signal is input to the external input 1
(CNT) of IU.
Filter sign
External input 1
Standard
No display None
Setting 1 180Hr
Setting 2 600Hr
Setting 3 1,000Hr
Setting 4
1,000Hr
Operation stop
External input 1 signal
Set the signal type to input to the external input 1 (CNT) of IU.
External input 2
External input 2 signal
This is operable when the IU equipped with the external input 2 is connected.
External input 1 signal
External input 2
External input 2 signal
30
31
Heating thermo-OFF temp adjustment
Adjust the temperature for judging to make thermostat ON or OFF during
heating operation.
Adjustable range is 0°C to +3°C.
Heating thermo-OFF temp adjustment
Fan control in heating thermo-OFF
Set the fan speed at the heating thermo-OFF.
Low: The fan runs at the low speed.
Set fan speed: The fan runs at the same speed as that during the thermo-ON
operation.
Intermittent: Cycles of Lo fan operation for 2 minutes and stop for 5 minutes
are repeated.
Stop: The fan is stopped.
Fan control in cooling thermo-OFF
Set the fan speed at the cooling thermo-OFF.
Low: The fan runs at the low speed.
Set fan speed: The fan runs at the same speed as that during the thermo-ON
operation.
Intermittent: Cycles of Lo fan operation for 2 minutes and stop for 5 minutes
are repeated.
Stop: The fan is stopped.
Return air sensor adjustment
Adjust the temperature detected with the return air temp sensor.
Adjustable range is -2°C to +2°C.
Return air sensor adjustment
Fan control in cooling thermo-OFF
Fan control in heating thermo-OFF
38
39
9. Service & Maintenance
Service & Maintenance settings cover the following items.
(1) IU address: Displays the “IU address” and “OU address” of the IU connected to the R/C.
(2) Next service date: Enter the next service date (dd/mm/yy).
(3) Operation data: Operation data are displayed when the indoor unit No is selected.
(4) Error display: Error history and the data at occurrence of error, which are in the memory of R/C, are displayed.
(5) Saving IU settings: Contents of IU settings are saved in the R/C or transferred to IU.
󰚜
(6) Special settings: This is used for the erasing of IU address, resetting of CPU, initializing, etc.
󰚫
Tap the
Menu
button on the TOP screen.
②③
Main menu screen is displayed.
Tap the “Service & Maintenance” on the menu screen.
TOP screen
Menu screen 1
Menu screen 3
Display the service password input screen.
Enter the service password (4-digit number).
The service password is “9999”. (Unable to change)
Service password input
40
41
Individual display
Data of selected items are updated and displayed automatically.
Individual display
Error display
Error history and data at occurrence of error saved in the R/C are displayed.
(a) Error history
(b) Display anomaly data
(c) Erase anomaly data
(d) Reset periodical check
⑮⑯
Error history
Date and time when error occurred, IU address and Error Code are displayed.
If none is recorded in the error history, no error is displayed.
Delete error history
If the
Delete
button on the Error history screen is tapped, the Delete error
history acknowledge screen is displayed. Tap
Yes
to erase the display of
error history.
Error display
Error history
No error display
Delete error history
15
18
19
20
42
43
Display anomaly data
Operation data taken just before the occurrence of error are displayed.
Display items are same as the <Operation data items> (refer to
).
Erase anomaly data
When tapping the
Yes
button on the Erase anomaly data acknowledge
screen, the anomaly data are erased.
󰚜
Saving IU settings
Contents of setting for IU are saved in the R/C or transmitted to IU.
(a) Save IU settings
(b) Automatic saving
(c) Transfer the saved data
Reset periodical check
When tapping the
Yes
button on the Reset periodical check acknowledge
screen, the periodical check is reset and the time count is reset.
Display anomaly data
Erase anomaly data
Reset periodical check
󰚜
Saving IU settings
22
23
25
44
45
󰚫
Special settings
Erase IU address: Memory of the IU address for multi (KX) unit is erased.
CPU reset: Microcomputers of IU and OU connected are reset (State
of restoration after power failure).
Initializing: Settings on R/C and IU connected are initialized (State of
factory default).
Touch panel calibration
: Use this to correct when the display and the touch position
are not matched.
󰚮
Restore of default setting
Settings on the R/C and IU connected are restored to the default setting (State
of factory default). Tap
Yes
to restore the default setting.
󰚭
CPU reset
All microcomputers on the R/C operated, other R/Cs, IUs and OUs are reset
(State of restoration after power failure). Tap
Yes
to reset CPU
󰚬
Erase IU address
Memory of the IU address for Multi (KX) unit is erased. This is operable from
the main R/C only and only when IUs are stopped. Tap
Yes
to erase IU
address
󰚫
Special settings
󰚬
Erase IU address
󰚭
CPU reset
󰚮
Restore of default setting
27
28
29
30
46
10. Select the language
Tap the
Menu
button on the TOP screen.
②③
Main menu screen is displayed.
Tap the “Select the language” on the menu screen.
When the Input password screen is displayed, enter the
administrator password (4-digit number).
Default number of the administrator password is “0000”. (Able to change)
Service password input
TOP screen
Menu screen
Menu screen #2
Select the language to be displayed on the R/C.
English / Deutsch / Français / Espanõl / Italiano /
Nederlandse / Türk / Português /
Русский
Select the language
1
Inhalt
1. Safety Precautions …………………2
2. Accessories & Prepare on site ……4
3. Remote control installation
procedure …………………………… 4
Determine where to install the remote control
.. 4
Installation procedure …………………………… 5
Main/Sub setting when more than one remote
controls are used ………………………………… 7
4. Functions and menu items of
Remote control ………………………9
5. The indication when power source
is supplied ………………………… 13
6. Installation settings ……………… 15
7. R/C function settings …………… 20
8. IU settings ………………………… 26
9. Service & Maintenance ………… 38
10. Select the Language …………… 46
1. Sicherheitshinweise ..........................2
2. Zubehör & Vorbereitung vor Ort .......4
3. Installationsverfahren für die
Fernbedienung ..................................4
Festlegung des Installationsortes für die
Fernbedienung ...................................................4
Installationsverfahren .........................................5
Konfiguration als Master-/Slave-
Fernbedienung, wenn mehrere
Fernbedienungen verwendet werden ...............7
4. Funktionen und Menüoptionen
der Fernbedienung ...........................9
5. Anzeige bei angelegter
Spannungsversorgung ...................13
6. Installationseinstellungen .............. 15
7. Funktionseinstellungen der
Fernbedienung ................................20
8. IG-Einstellungen ..............................26
9. Service & Inbetriebnahme ..............38
10. Auswahl der Sprache ....................46
2
1 . Sicherheitshinweise
Diese Installationsanleitung beschreibt das Installationsverfahren und die Sicherheitsvorkehrungen bei der Install-
ation der Fernbedienung. Diese Anleitung ist in Verbindung mit den Benutzerhandbüchern für das Innengerät, das
Außengerät und sonstige Zubehörkomponenten zu verwenden. Diese Anleitung vor Aufnahme der Installationsar-
beiten gründlich durchlesen, um das Gerät ordnungsgemäß zu installieren.
Sicherheitshinweise
Diese Anleitung vor Aufnahme der Installationsarbeiten gründlich durchlesen, um das Gerät ordnungsgemäß zu installieren.
Alle nachfolgenden Hinweise enthalten wichtige Informationen, die strikt zu befolgen sind.
WARNUNG
Die Nichtbefolgung oder unzureichende Befolgung dieser Hinweise kann schwerwiegende
Konsequenzen haben, wie etwa tödliche Unfälle, schwere Verletzungen usw.
VORSICHT
Die Nichtbefolgung oder unzureichende Befolgung dieser Hinweise kann zu Verletzungen
oder Sachschäden führen.
In Abhängigkeit von den Umständen sind auch schwerwiegende Konsequenzen möglich.
Die folgenden Piktogramme werden im Text verwendet.
Keinesfalls so verfahren.
Grundsätzlich die Anweisungen
befolgen.
Diese Anleitung an einem sicheren Ort aufbewahren, wo sie jederzeit zugänglich ist. Diese Anleitung dem Monteur
vorlegen, der das Gerät bewegen oder reparieren soll. Wenn das Gerät an einen anderen Eigentümer übergeht,
dem neuen Eigentümer die „Installationsanleitung“ aushändigen.
WARNUNG
Ein Fachunternehmen mit den Installationsarbeiten gemäß der Installationsanleitung beauftragen.
Die fehlerhafte Ausführung der Installation kann zu Stromschlag, Feuer oder Geräteausfällen führen.
Vor Aufnahme von Arbeiten an der Elektrik die Netzspannungsversorgung ausschalten.
Andernfalls können Stromschläge, Geräteausfälle oder Funktionsstörungen die Folge sein.
Das Gerät keinesfalls in einer ungeeigneten Umgebung oder an einem Ort installieren, an dem
Gase entstehen, einströmen, sich ansammeln oder austreten können.
Wenn das Gerät an Orten verwendet wird, in denen dichter Ölnebel, Dämpfe, Nebel organischer Lös-
ungsmittel, korrosive Gase (Ammoniak, Schwefelverbindungen, Säuren usw.) auftreten oder saure
oder alkalische Lösungen, Spezialsprays usw. verwendet werden, besteht die Gefahr von Strom-
schlägen, Geräteausfällen, Rauchbildung oder Feuer als Folge einer deutlichen Leistungsminderung
oder Korrosion der Gerätekomponenten.
Das Gerät nicht an Orten installieren, an denen übermäßiger Wasserdampf erzeugt wird oder
Kondensation auftritt.
Andernfalls können Stromschläge, Feuer oder Geräteausfälle die Folge sein.
Die angegebenen Kabel für die Verdrahtung verwenden und sorgfältig sichere Anschlüsse hers-
tellen, um die elektronischen Teile vor der Einwirkung externer Kräfte zu schützen.
Unzureichende Verbindungen oder Befestigungen können zu Wärmeerzeugung, Feuer usw. führen.
15
Die Schaltfläche
Menu
in der Touchscreen-Anzeige drücken.
6. Installationseinstellungen
Die Installationseinstellungen umfassen die folgenden Optionen.
(1) Installationsdatum: Das Datum registrieren, an dem das Gerät installiert wurde.
(2) Firma: Die Kontaktdaten für den Service eingeben.
(3) Testbetrieb: Cooling test run, drain pump test run or compressor Hz fixed operation is performed.
(4) Stat. Zieldruck Abgl. bei Aussenluftbetr.: Der statische Druck wird angepasst, sofern ein IG mit Kanal und der
Funktion zur Anpassung des externen statischen Drucks angeschlossen ist.
(5) Autom. Adressierung aendern: Sofern Modelle der Multi-Serie (KX) verwendet werden, kann die IG-Adresse
nach der automatischen Adressierung geändert werden.
(6)
Adresseinstellung des Master-IG: Sofern Modelle der Multi-Serie (KX) verwendet werden, die Adresse des Master/
Slave-IG zuweisen, um eine Verwechslung der Betriebsarten (Kühlbetrieb/Heizbetrieb) zu vermeiden.
(7) IG Back-Up-Funktion: IU rotation, IU capacity back-up, IU fault back-up werden hier eingestellt.
②③
Das Hauptmenü wird angezeigt.
Die Schaltfläche „Installation-Einstellungen“ im Menü drücken.
Die Anzeige zur Eingabe des Service-Passworts erscheint.
Das Service-Passwort eingeben (4-stellige Zahl).
Das Service-Passwort lautet „9999“. (Nicht veränderbar)
Touchscreen-Anzeige
Menü-Bildschirm
Menü-Bildschirm #2
Service-Passworteingeben
29
Filtermeldung
Die Zeit für die Anzeige der
Filtermeldung einstellen.
Externer Eingang 1
Die Steuerung auf den Zeitpunkt einstellen, an dem das Signal am externen
Eingang 1 (CNT) des IG ankommt.
Filtermeldung
Externer Eingang 1
Standard
Keine
Anzeige
Keiner
Einstellung 1
180Std.
Einstellung
2 600Std.
Einstellung
3 1,000Std.
Einstellung
4
1,000Std.
Stopp-Betrieb
Externer Eingang 1 Signal
Den Typ des Signals festlegen, das am externen Eingang 1 (CNT) des IG ankommt.
Externer Eingang 2
Externer Eingang 2 Signal
Diese Funktion ist aktiv, wenn das IG mit externem Eingang 2 angeschlossen ist.
Externer Eingang 1 Signal
Externer Eingang 2
Externer Eingang 2 Signal
38
9. Service & Inbetriebnahme
Die Einstellungen unter Service & Inbetriebnahme umfassen die folgenden Optionen.
(1) Innengeraeteadressnummer: Zeigt die „IG-Adresse“ und die „AG-Adresse“ für das mit der Fernbedienung
verbundene IG an.
(2) Naechstes Servicedatum: Das nächste Servicedatum eingeben (TT/MM/JJ).
(3) Betriebsdaten: Die Betriebsdaten werden angezeigt, wenn die Innengeräte-Nr. gewählt wird.
(4) Fehleranzeige: Die Fehlerhistorie und das Datum, an dem ein in der Fernbedienung gespeicherter Fehler
auftrat, werden angezeigt.
(5) Innengeraeteeinstellungen speichern: Die IG-Einstellungen werden in der Fernbedienung gespeichert oder an
das IG übertragen.
󰚜
(6) Spezialeinstellungen: Unter dieser Option können IG-Adressen gelöscht, die CPU zurückgesetzt, die Initialisier-
ung durchgeführt werden usw.
󰚫
Die Schaltfläche
Menu
in der Touchscreen-Anzeige drücken.
②③
Das Hauptmenü wird angezeigt.
Die Schaltfläche „Service & Inbetriebnahme“ im Menü drücken.
Touchscreen-Anzeige
Menü-Bildschirm 1
Menü-Bildschirm 3
Die Anzeige zur Eingabe des Service-Passworts erscheint.
Das Service-Passwort eingeben (4-stellige Zahl).
Das Service-Passwort lautet „9999“. (Nicht veränderbar)
Service-Passwort eingeben
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164
  • Page 165 165
  • Page 166 166
  • Page 167 167
  • Page 168 168
  • Page 169 169
  • Page 170 170
  • Page 171 171
  • Page 172 172
  • Page 173 173
  • Page 174 174
  • Page 175 175
  • Page 176 176
  • Page 177 177
  • Page 178 178
  • Page 179 179
  • Page 180 180
  • Page 181 181
  • Page 182 182
  • Page 183 183
  • Page 184 184
  • Page 185 185
  • Page 186 186
  • Page 187 187
  • Page 188 188
  • Page 189 189
  • Page 190 190
  • Page 191 191
  • Page 192 192
  • Page 193 193
  • Page 194 194
  • Page 195 195
  • Page 196 196
  • Page 197 197
  • Page 198 198
  • Page 199 199
  • Page 200 200
  • Page 201 201
  • Page 202 202
  • Page 203 203
  • Page 204 204
  • Page 205 205
  • Page 206 206
  • Page 207 207
  • Page 208 208
  • Page 209 209
  • Page 210 210
  • Page 211 211
  • Page 212 212
  • Page 213 213
  • Page 214 214
  • Page 215 215
  • Page 216 216
  • Page 217 217
  • Page 218 218
  • Page 219 219
  • Page 220 220
  • Page 221 221
  • Page 222 222
  • Page 223 223
  • Page 224 224
  • Page 225 225
  • Page 226 226
  • Page 227 227
  • Page 228 228
  • Page 229 229
  • Page 230 230
  • Page 231 231
  • Page 232 232
  • Page 233 233
  • Page 234 234
  • Page 235 235
  • Page 236 236
  • Page 237 237
  • Page 238 238
  • Page 239 239
  • Page 240 240
  • Page 241 241
  • Page 242 242
  • Page 243 243
  • Page 244 244
  • Page 245 245
  • Page 246 246
  • Page 247 247
  • Page 248 248
  • Page 249 249
  • Page 250 250
  • Page 251 251
  • Page 252 252
  • Page 253 253
  • Page 254 254
  • Page 255 255
  • Page 256 256
  • Page 257 257
  • Page 258 258
  • Page 259 259
  • Page 260 260
  • Page 261 261
  • Page 262 262
  • Page 263 263
  • Page 264 264
  • Page 265 265
  • Page 266 266
  • Page 267 267
  • Page 268 268
  • Page 269 269
  • Page 270 270
  • Page 271 271
  • Page 272 272
  • Page 273 273
  • Page 274 274
  • Page 275 275
  • Page 276 276
  • Page 277 277
  • Page 278 278
  • Page 279 279
  • Page 280 280
  • Page 281 281
  • Page 282 282
  • Page 283 283
  • Page 284 284
  • Page 285 285
  • Page 286 286
  • Page 287 287
  • Page 288 288
  • Page 289 289
  • Page 290 290
  • Page 291 291
  • Page 292 292
  • Page 293 293
  • Page 294 294
  • Page 295 295
  • Page 296 296
  • Page 297 297
  • Page 298 298
  • Page 299 299
  • Page 300 300
  • Page 301 301
  • Page 302 302
  • Page 303 303
  • Page 304 304
  • Page 305 305
  • Page 306 306
  • Page 307 307
  • Page 308 308
  • Page 309 309
  • Page 310 310
  • Page 311 311
  • Page 312 312
  • Page 313 313
  • Page 314 314
  • Page 315 315
  • Page 316 316
  • Page 317 317
  • Page 318 318
  • Page 319 319
  • Page 320 320
  • Page 321 321
  • Page 322 322
  • Page 323 323
  • Page 324 324
  • Page 325 325
  • Page 326 326
  • Page 327 327
  • Page 328 328
  • Page 329 329
  • Page 330 330
  • Page 331 331
  • Page 332 332
  • Page 333 333
  • Page 334 334
  • Page 335 335
  • Page 336 336
  • Page 337 337
  • Page 338 338
  • Page 339 339
  • Page 340 340
  • Page 341 341
  • Page 342 342
  • Page 343 343
  • Page 344 344
  • Page 345 345
  • Page 346 346
  • Page 347 347
  • Page 348 348
  • Page 349 349
  • Page 350 350
  • Page 351 351
  • Page 352 352
  • Page 353 353
  • Page 354 354
  • Page 355 355
  • Page 356 356
  • Page 357 357
  • Page 358 358
  • Page 359 359
  • Page 360 360
  • Page 361 361
  • Page 362 362
  • Page 363 363
  • Page 364 364
  • Page 365 365
  • Page 366 366
  • Page 367 367
  • Page 368 368
  • Page 369 369
  • Page 370 370
  • Page 371 371
  • Page 372 372
  • Page 373 373
  • Page 374 374
  • Page 375 375
  • Page 376 376
  • Page 377 377
  • Page 378 378
  • Page 379 379
  • Page 380 380
  • Page 381 381
  • Page 382 382
  • Page 383 383
  • Page 384 384
  • Page 385 385
  • Page 386 386
  • Page 387 387
  • Page 388 388
  • Page 389 389
  • Page 390 390
  • Page 391 391
  • Page 392 392
  • Page 393 393
  • Page 394 394
  • Page 395 395
  • Page 396 396
  • Page 397 397
  • Page 398 398
  • Page 399 399
  • Page 400 400
  • Page 401 401
  • Page 402 402
  • Page 403 403
  • Page 404 404
  • Page 405 405
  • Page 406 406
  • Page 407 407
  • Page 408 408
  • Page 409 409
  • Page 410 410
  • Page 411 411
  • Page 412 412
  • Page 413 413
  • Page 414 414
  • Page 415 415
  • Page 416 416
  • Page 417 417
  • Page 418 418
  • Page 419 419
  • Page 420 420
  • Page 421 421
  • Page 422 422
  • Page 423 423

Mitsubishi Heavy Industries eco touch RC-EX1A Guia de instalação

Categoria
Aquecedores de ambiente
Tipo
Guia de instalação
Este manual também é adequado para