SICK WTB4FT DoubleLine Instruções de operação

Tipo
Instruções de operação
O P E R A T I N G I N S T R U C T I O N S
WTB4FT DoubleLine
Miniature photoelectric sensors
O P E R A T I N G I N S T R U C T I O N S
WTB4FT DoubleLine
Miniature photoelectric sensors
de
en
es
fr
it
ja
pl
pt
ru
zh
Described product
W4F
WTB4FT DoubleLine
Manufacturer
SICK AG
Erwin-Sick-Str. 1
79183 Waldkirch
Germany
Legal information
This work is protected by copyright. Any rights derived from the copyright shall be
reserved for SICK AG. Reproduction of this document or parts of this document is
only permissible within the limits of the legal determination of Copyright Law. Any modi‐
fication, abridgment or translation of this document is prohibited without the express
written permission of SICK AG.
The trademarks stated in this document are the property of their respective owner.
© SICK AG. All rights reserved.
Original document
This document is an original document of SICK AG.
2006/42/EC
NO
SAFETY
8025300.1BBX / 2021-05-12 | SICK
Subject to change without notice
3
Contents
1 General safety notes......................................................................... 5
2 Notes on UL approval........................................................................ 5
3 Product description........................................................................... 5
3.1 Intended use............................................................................................. 5
3.2 Operating elements and status indicators.............................................. 5
4 Mounting............................................................................................. 6
5 Electrical installation........................................................................ 6
6 Commissioning.................................................................................. 8
6.1 Alignment.................................................................................................. 8
6.2 Check the application conditions:........................................................... 9
6.3 Setting....................................................................................................... 10
6.4 Process data structure............................................................................. 12
7 Troubleshooting................................................................................. 12
8 Disassembly and disposal............................................................... 13
9 Maintenance...................................................................................... 13
10 Technical specifications................................................................... 13
10.1 Dimensional drawings.............................................................................. 14
CONTENTS
4
8025300.1BBX / 2021-05-12 | SICK
Subject to change without notice
1 General safety notes
Read the operating instructions before commissioning.
Connection, mounting, and configuration may only be performed by trained
specialists.
2006/42/EC
NO
SAFETY
Not a safety component in accordance with the EU Machinery Directive.
Do not install the sensor at locations that are exposed to direct UV radiation
(sunlight) or other weather influences, unless this is expressly permitted in the
operating instructions.
When commissioning, protect the device from moisture and contamination.
These operating instructions contain information required during the life cycle of
the sensor.
2 Notes on UL approval
The device shall be supplied from an isolating transformer having a secondary overcur‐
rent protective device that complies with UL 248 to be installed in the field rated either:
a) max 5 amps for voltages 0 ~ 20 V (0 ~ 28.3 V peak), or
b) 100 / Vp for voltages of 20 ~ 30 V (28.3 ~ 42.4 V peak).
Alternatively, they can be supplied from a Class 2 power supply.
UL Environmental Rating: Enclosure type 1
3 Product description
3.1 Intended use
The WTB4FT is an opto-electronic photoelectric background suppression proximity sen‐
sor (referred to as “sensor” in the following) for the optical, non-contact detection of
objects, animals, and persons. If the product is used for any other purpose or modified
in any way, any warranty claim against SICK AG shall become void.
3.2 Operating elements and status indicators
Photoelectric proximity sensor with background suppression.
Table 1: Operating elements and status indicators
WTB4
FT-
xxxxxx20Axx xxxxxx30Zxx xxxxxx10Zxx xxxxxxA0Zxx
Teach-Turn adjust‐
ment
Teach-in button Potentiometer Preset default - no
possibility of setting
1
3
2
4
34
2
2
34
34
GENERAL SAFETY NOTES 1
8025300.1BBX / 2021-05-12 | SICK
Subject to change without notice
5
1
BluePilot blue: sensing range display
2
Press-turn element / Potentiometer / Teach-Button: adjusting the sensing range
3
LED indicator yellow: status of received light beam
4
LED indicator green: supply voltage active
4 Mounting
Mount the sensor using a suitable mounting bracket (see the SICK range of accesso‐
ries).
Figure 1: Alignment of the sensor relative to the object direction
Note the sensor’s maximum permissible tightening torque of < 0,4 Nm.
Note the preferred direction of the object relative to the sensor, cf. see figure 1, page 6.
5 Electrical installation
Operation in standard I/O mode:
The sensors must be connected in a voltage-free state. The following information must
be observed, depending on the connection type:
Male connector connection: Pin assignment
Cable: Wire color
Only apply voltage/switch on the voltage supply once all electrical connections have
been established.
Operation in IO-Link mode: Connect the device to a suitable IO-Link master and inte‐
grate in the master or control via IODD/function block. The green LED flashes on the
sensor. IODD and function block are available to download from www.sick.com under
the part number.
Explanations on connection diagram.
BN = brown
WH = white
BU = blue
BK = black
MF (pin 2 configuration) = external input, teach-in, switching signal
Q
L1
/C = switching output, IO-Link communication
Test = Test input
4 MOUNTING
6
8025300.1BBX / 2021-05-12 | SICK
Subject to change without notice
U
B
: 10 ... 30 V DC
Table 2: Electrical connection
WTB4FT- x4 x2 xH x1 -xG
1 = BN
2 = WH
3 = BU
4 = BK
1
2
4 3
2
1
4
3
0.14 mm
2
AWG26
1
4
3
0.14 mm
2
AWG26
Table 3: DC
WTx4Fx-
Push-pull xx161xxxA00 xx162xxxA00 xx16AxxxA00 xx16NxxxA00 xx16xxxxA01-
A99
PNP xx861xxxA00 xx862xxxA00 xx86AxxxA00 xx86NxxxA00 xx86xxxxA01-
A99
1 = BN + (L+)
2 = WH MF
3 = BU - (M)
4 = BK Q
L1
/C
Default: MF
Q
Q no function no function www.sick.com
8022709
Default:
Q
L1
/C
Q
Q
Q
Q
www.sick.com
8022709
Table 4: DC
WTx4Fx- xx112xx0Zxx xx111xx0Zxx xx312xx0Zxx xx311xx0Zxx
1 = BN + (L+)
2 = WH
Q
Q no function
3 = BU - (M)
4 = BK Q
Q
Q
Q
Table 5: DC
WTx4Fx- xx311xx0Zxx xx312xx0Zxx
1 = BN + (L+)
3 = BU - (M)
4 = BK Q
Q
ELECTRICAL INSTALLATION 5
8025300.1BBX / 2021-05-12 | SICK
Subject to change without notice
7
Table 6: Push-pull, PNP, NPN
Push-pull
PNP
NPN
+ (L+)
Q ≤ 100 mA
‒ (M)
Push-pull
PNP
NPN
+ (L+)
Q ≤ 100 mA
‒ (M)
6 Commissioning
6.1 Alignment
Align the sensor with the object. Select the position so that the red emitted light beam
hits the center of the object. You must ensure that the optical opening (front screen) of
the sensor is completely clear [see figure 2].
Figure 2: Alignment
6 COMMISSIONING
8
8025300.1BBX / 2021-05-12 | SICK
Subject to change without notice
Figure 3: Alignment
6.2 Check the application conditions:
Sensing range
WTB4FT are photoelectric proximity sensors with background suppression. Depending
on the remission of the object to be detected, and perhaps the background behind it,
a minimum distance (y) between the set sensing range (x) and the background is to be
maintained.
Check the application conditions:
Adjust the sensing range and distance to the object or background as well as the
remission capability of the object according to the corresponding diagram (x = sensing
range, y = minimum distance between set sensing range and background (white, 90%))
Remission: 6% = black 1, 18% = gray 2, 90% = white 3 (relative to standard white as
per DIN 5033). We recommend that the adjustment be performed with an object of low
remission.
The minimum distance (= y) for the background suppression can be determined from
the figure figure 4 as follows:
Example: x = 50 mm, y = 1 mm. That is, the background (white, 90%) is suppressed at
a distance of > 1 mm from the sensor.
NOTE
Observe the minimum distance of 8 mm.
0
20
(0.79)
10
(0.39)
40
(1.57)
30
(1.18)
50
(1.97)
80
(3.15)
100
(3.94)
20
(0.79)
40
(1.57)
60
(2.36)
0
y
x
y
x
Minimum distance in mm (y) between the set sensing
range and white background (90 % remission)
Example:
Safe suppression of the background
White background (90 %)
Black object (6 % remission)
Set sensing range x = 80 mm
Needed minimum distance to white
background y = 5 mm
Distance in mm (inch)
Recommended sensing range for
the best performance
60
(2.36)
120
(4.72)
1
6%/90%
90%/90%
33
2
18%/90%
Figure 4: Characteristic line
0
8
15
8
15
7 120
Distance in mm (inch)
112
117
1
2
3
15
80
(3.15)
100
(3.94)
20
(0.79)
40
(1.57)
60
(2.36)
120
(4.72)
D
C
A B
BluePilot
E
F
Figure 5: bar graph
COMMISSIONING 6
8025300.1BBX / 2021-05-12 | SICK
Subject to change without notice
9
0
Distance in mm (inch)
Dimensions in mm (inch)
4
(0.16)
6
(0.24)
–6
(–0.24)
–4
(–0.16)
0
2
(0.08)
–2
(–0.08)
10
(0.39)
220
(8.66)
80
(3.15)
40
(1.57)
120
(4.72)
160
(6.30)
200
(7.87)
240
(9.45)
130
(5.12)
Recommended sensing range for
the best performance
Figure 6: Horizontal light spot size
0
Distance in mm (inch)
Dimensions in mm (inch)
20
(0.79)
60
(2.36)
40
(1.57)
80
(3.15)
100
(3.94)
120
(4.72)
12
(0.47)
15
(0.59)
–3
(–0.12)
0
6
(0.24)
9
(0.35)
3
(0.12)
10
(0.39)
120
(4.72)
50
(1.97)
Apex angle 4°
Recommended sensing range for
the best performance
Figure 7: Vertical light spot size
A Sensing range min. in mm
B Sensing range max. in mm
C Viewing range
D Setting range switching threshold for background suppression
E Sensing range indicator
F Teach-Turn adjustment
blue Recommended sensing range for the best performance
6.3 Setting
Sensing range adjustment
WTB4FT-xxxxxx1xAxx
Adjustment via a potentiometer:
Clockwise rotation: Sensing range increased.
Counterclockwise rotation: Sensing range reduced.
WTB4FT-xxxxxx2xAxx
The sensing range is adjusted by pressing the teach-in button (approx. 1-3 sec.).
Depending on the requirements, the potentiometer can be used for fine-tuning (without
pressing the teach-in button).
Clockwise rotation: Sensing range increased.
Counterclockwise rotation: Sensing range reduced.
The sensing range can also be adjusted using just the potentiometer.
6 COMMISSIONING
10
8025300.1BBX / 2021-05-12 | SICK
Subject to change without notice
1...3 sec.
2
3
1
Figure 8: WTB4F, adjustment of the sensing range using a teach-turn adjustment
WTB4FT-xxxxxx3x
Adjustment via teach-in: The sensing range is adjusted by pressing the teach-in button
(approx. 1-3 sec.).
WTB4FT-xxxxxxAx
Sensor with fixed sensing range and no adjustment.
COMMISSIONING
6
8025300.1BBX / 2021-05-12 | SICK
Subject to change without notice
11
NOTE
Do not operate the teach-in button using sharp objects.
Please refer to the enclosed operating instructions for the IO-Link photoelectric sensor
for information about adjusting the IO-Link sensing range.
The sensor is adjusted and ready for operation.
WTx4Fx-xxxxxxA0Zxx:
Sensor which it is not possible to set: the sensor is adjusted and ready for operation.
6.4 Process data structure
WTB4FT--xxxxxxxxAxx:
A00 A70 A71 A72 A73 A75
IO-Link V1.1
Process
data
2 bytes 4 bytes
Byte 0: bits 15... 8
Byte 1: bits 7... 0
Byte 0: bits 31...
24
Byte 1: bits 13...
16
Byte 2: bits 15...
8
Byte 3: bits 7... 0
Bit 0 / Data
type
Q
L1
/ Boolean
Bit 1 / Data
type
Q
L2
/ Boolean Qint.1 /
Boolean
Q
L2
/ Boo‐
lean
Qint.1 / Boolean
Bit... /
Descrip‐
tion / Data
type
2 ...15 /
[empty]
2 ...15 /
[time
measure‐
ment
value] /
UInt 14
2 … 15 /
[counter
value] /
UInt 14
2 … 15 /
[length /
speed
measure‐
ment] /
SInt14
2 /
Qint.1 /
Boolean
2 … 7 / [empty]
Bit... /
Descrip‐
tion / Data
type
3 … 15 /
[time
measure‐
ment
value] /
UInt13
8 … 31 / [carrier
load] / UInt 24
7 Troubleshooting
The Troubleshooting table indicates measures to be taken if the sensor stops working.
Table 7: Troubleshooting
LED indicator/fault pattern Cause Measures
Green LED flashes IO-Link communication None
Switching outputs do not
behave in accordance with
table 6
1. IO-Link communication
2. Change of the configuration
3. Short-circuit
1. None
2. Adjustment of the configura‐
tion
3. Check electrical connections
6 COMMISSIONING
12
8025300.1BBX / 2021-05-12 | SICK
Subject to change without notice
LED indicator/fault pattern Cause Measures
Yellow LED lights up, no object
in the path of the beam
The sensing range distance is
too large
Reduce the sensing range
Object is in the path of the
beam, yellow LED does not
light up
Distance between the sensor
and the object is too long or
sensing range is set too short
Increase the sensing range
No object in beam path, no
output signal
Test input (Test) is not con‐
nected properly
Check connection of the test
input. When using female cable
connectors with LED indicators,
make sure the test input is
assigned correspondingly.
8 Disassembly and disposal
The sensor must be disposed of according to the applicable country-specific regula‐
tions. Efforts should be made during the disposal process to recycle the constituent
materials (particularly precious metals).
NOTE
Disposal of batteries, electric and electronic devices
According to international directives, batteries, accumulators and electrical or
electronic devices must not be disposed of in general waste.
The owner is obliged by law to return this devices at the end of their life to the
respective public collection points.
WEEE: This symbol on the product, its package or in this document,
indicates that a product is subject to these regulations.
9 Maintenance
SICK sensors are maintenance-free.
We recommend doing the following regularly:
Clean the external lens surfaces
Check the screw connections and plug-in connections
No modifications may be made to devices.
Subject to change without notice. Specified product properties and technical data are
not written guarantees.
10 Technical specifications
WTB4FT DoubleLine
Recommended sensing range for the best performance 30 mm ... 80 mm
Sensing range max. 7 mm … 120 mm (Typ)
1)
Light spot diameter/distance 2 x (2 x 28 mm) (50 mm) (Typ) 2 x (9
x 50 mm) (100 mm) (Typ)
Supply voltage U
B
DC 10 ... 30 V
2)
Ripple ≤ 5 Vss
Output current I
max.
≤ 100 mA
DISASSEMBLY AND DISPOSAL 8
8025300.1BBX / 2021-05-12 | SICK
Subject to change without notice
13
WTB4FT DoubleLine
Current consumption 25 mA
Communication mode COM2
IO-Link 1.1
Switching frequency 500 Hz
3)
Max. response time 1000 µs
4)
Enclosure rating IP66, IP67
Protection class III
5)
Circuit protection A, B, D
6)
Ambient operating temperature –40 °C ... +60 °C
1)
Object with 90 % remission (based on standard white DIN 5033)
2)
Limit values. U
B
connections reverse-polarity protected. Residual ripple max 5 V
PP
3)
With light / dark ratio 1:1
4)
Signal transit time with resistive load
5)
Reference voltage DC 50 V
6)
A = U
B
-connections reverse polarity protected
B = inputs and output reverse-polarity protected
D = outputs overcurrent and short-circuit protected
10.1 Dimensional drawings
8
67
4
5
3
1
2
16 (0.63) 12.1 (0.48)
9 (0.35)
Ø 6.8
(0.27)
5.6 (0.22)
Ø 6.2 (0.24)
8 (0.32)
8.1 (0.32)
3.5 (0.14)
37.2 (1.46)
4.7 (0.18)
3.4 (0.13)
6.7 (0.26)
9 (0.35) 8 (0.31)
Figure 9: Dimensional drawing 1, cable
1
Preferred direction of the target
object
2
Center of optical axis, sender
3
Center of optical axis, receiver
4
M3 threaded mounting hole
5
Connection
6
LED indicator green: supply voltage
active
7
LED indicator yellow: status of
received light beam
8
Press-turn element / Potentiome‐
ter / Teach-Button: adjusting the
sensing range
3
1
2
8
67
4
5
16 (0.63) 12.1 (0.48)
9 (0.35)
M8
(0.31)
5.6 (0.22)
Ø 6.2 (0.24)
8 (0.32)
11 (0.43)
3.5 (0.14) 9 (0.35) 8 (0.31)
40.1 (1.58)
7.6 (0.3)
3.4 (0.13)
6.7 (0.26)
Figure 10: Dimensional drawing 2, male
connector
10 TECHNICAL SPECIFICATIONS
14
8025300.1BBX / 2021-05-12 | SICK
Subject to change without notice
B E T R I E B S A N L E I T U N G
WTB4FT DoubleLine
Miniatur-Lichtschranken
de
en
es
fr
it
ja
pl
pt
ru
zh
Beschriebenes Produkt
W4F
WTB4FT DoubleLine
Hersteller
SICK AG
Erwin-Sick-Str. 1
79183 Waldkirch
Deutschland
Rechtliche Hinweise
Dieses Werk ist urheberrechtlich geschützt. Die dadurch begründeten Rechte bleiben
bei der Firma SICK AG. Die Vervielfältigung des Werks oder von Teilen dieses Werks
ist nur in den Grenzen der gesetzlichen Bestimmungen des Urheberrechtsgesetzes
zulässig. Jede Änderung, Kürzung oder Übersetzung des Werks ohne ausdrückliche
schriftliche Zustimmung der Firma SICK AG ist untersagt.
Die in diesem Dokument genannten Marken sind Eigentum ihrer jeweiligen Inhaber.
© SICK AG. Alle Rechte vorbehalten.
Originaldokument
Dieses Dokument ist ein Originaldokument der SICK AG.
2006/42/EC
NO
SAFETY
16
8025300.1BBX / 2021-05-12 | SICK
Subject to change without notice
Inhalt
11 Allgemeine Sicherheitshinweise..................................................... 18
12 Hinweise zur UL Zulassung.............................................................. 18
13 Produktbeschreibung....................................................................... 18
13.1 Bestimmungsgemäße Verwendung......................................................... 18
13.2 Bedien- und Anzeigeelemente................................................................. 18
14 Montage.............................................................................................. 19
15 Elektrische Installation..................................................................... 19
16 Inbetriebnahme................................................................................. 21
16.1 Ausrichtung............................................................................................... 21
16.2 Die Einsatzbedingungen prüfen:.............................................................. 21
16.3 Einstellung................................................................................................. 22
16.4 Prozessdatenstruktur............................................................................... 24
17 Störungsbehebung............................................................................ 24
18 Demontage und Entsorgung............................................................ 25
19 Wartung.............................................................................................. 25
20 Technische Daten.............................................................................. 25
20.1 Maßzeichnungen...................................................................................... 26
INHALT
8025300.1BBX / 2021-05-12 | SICK
Subject to change without notice
17
11 Allgemeine Sicherheitshinweise
Lesen Sie vor der Inbetriebnahme des Geräts die Betriebsanleitung.
Der Anschluss, die Montage und die Konfiguration des Geräts dürfen nur
von geschultem Fachpersonal vorgenommen werden.
2006/42/EC
NO
SAFETY
Bei diesem Gerät handelt es sich um kein sicherheitsgerichtetes Bauteil im
Sinne der EU-Maschinenrichtlinie.
Installieren Sie den Sensor nicht an Orten, die direkter UV-Strahlung (Son‐
nenlicht) oder sonstigen Wettereinflüssen ausgesetzt sind, ausser dies ist in der
Betriebsanleitung ausdrücklich erlaubt.
Bei der Inbetriebnahme ist das Gerät ausreichend vor Feuchtigkeit und Verschmut‐
zung zu schützen.
Die vorliegende Betriebsanleitung enthält Informationen, die während des Lebens‐
zyklus der Lichtschranke benötigt werden.
12 Hinweise zur UL Zulassung
The device shall be supplied from an isolating transformer having a secondary overcur‐
rent protective device that complies with UL 248 to be installed in the field rated either:
a) max 5 amps for voltages 0 ~ 20 V (0 ~ 28.3 V peak), or
b) 100 / Vp for voltages of 20 ~ 30 V (28.3 ~ 42.4 V peak).
Alternatively, they can be supplied from a Class 2 power supply.
UL Environmental Rating: Enclosure type 1
13 Produktbeschreibung
13.1 Bestimmungsgemäße Verwendung
Die WTB4FT ist ein optoelektronischer Reflexions-Lichttaster mit Hintergrundausblen‐
dung (im Folgenden Sensor genannt) und wird zum optischen, berührungslosen Erfas‐
sen von Sachen, Tieren und Personen eingesetzt. Bei jeder anderen Verwendung und
bei Veränderungen am Produkt verfällt jeglicher Gewährleistungsanspruch gegenüber
der SICK AG.
13.2 Bedien- und Anzeigeelemente
Reflexionslichttaster mit Hintergrundausblendung.
11 ALLGEMEINE SICHERHEITSHINWEISE
18
8025300.1BBX / 2021-05-12 | SICK
Subject to change without notice
Tabelle 8: Bedien- und Anzeigeelemente
WTB4
FT-
xxxxxx20Axx xxxxxx30Zxx xxxxxx10Zxx xxxxxxA0Zxx
Drück-Dreh-Element Teach-In-Taste Potentiometer Feste Voreinstellung
- keine Einstellmög‐
lichkeit
1
3
2
4
34
2
2
34
34
1
BluePilot blau: Schaltabstandsanzeige
2
Drück-Dreh-Element / Potentiometer / Teach-Taste: Einstellung des Schaltabstands
3
Anzeige-LED gelb: Status Lichtempfang
4
Anzeige-LED grün: Betriebsspannung aktiv
14 Montage
Den Sensor an einen geeigneten Befestigungswinkel montieren (siehe SICK-Zube‐
hör-Programm).
Abbildung 11: Ausrichtung des Sensors relativ zur Objektrichtung
Maximal zulässiges Anzugsdrehmoment des Sensors von < 0,4 Nm beachten.
Vorzugsrichtung des Objektes zum Sensor beachten, vgl. siehe Abbildung 11, Seite 19.
15 Elektrische Installation
Betrieb im Standard-I/O-Modus:
Anschluss der Sensoren muss spannungsfrei erfolgen. Je nach Anschlussart sind die
folgenden Informationen zu beachten:
Steckeranschluss: Pinbelegung
Leitung: Adernfarbe
Erst nach Anschluss aller elektrischen Verbindungen die Spannungsversorgung anlegen
bzw. einschalten.
PRODUKTBESCHREIBUNG 13
8025300.1BBX / 2021-05-12 | SICK
Subject to change without notice
19
Betrieb im IO-Link-Modus: Gerät an geeigneten IO-Link-Master anschließen und per
IODD / Funktionsblock im Master, bzw. in der Steuerung integrieren. Am Sensor blinkt
die grüne Anzeige-LED. IODD und Funktionsblock stehen unter www.sick.com unter der
Bestellnummer zum Download bereit.
Erläuterungen zum Anschlussschema.
BN = braun
WH = weiß
BU = blau
BK = schwarz
MF (Pin-2-Konfiguration) = Externer Eingang, Teach-in, Schaltsignal
Q
L1
/C = Schaltausgang, IO-Link Kommunikation
Test = Test-Eingang
U
B
: 10 ... 30 V DC
Tabelle 9: Elektrischer Anschluss
WTB4FT- x4 x2 xH x1 -xG
1 = BN
2 = WH
3 = BU
4 = BK
1
2
4 3
2
1
4
3
0.14 mm
2
AWG26
1
4
3
0.14 mm
2
AWG26
Tabelle 10: DC
WTx4Fx-
Push-pull xx161xxxA00 xx162xxxA00 xx16AxxxA00 xx16NxxxA00 xx16xxxxA01-
A99
PNP xx861xxxA00 xx862xxxA00 xx86AxxxA00 xx86NxxxA00 xx86xxxxA01-
A99
1 = BN + (L+)
2 = WH MF
3 = BU - (M)
4 = BK Q
L1
/C
Default: MF
Q
Q no function no function www.sick.com
8022709
Default:
Q
L1
/C
Q
Q
Q
Q
www.sick.com
8022709
Tabelle 11: DC
WTx4Fx- xx112xx0Zxx xx111xx0Zxx xx312xx0Zxx xx311xx0Zxx
1 = BN + (L+)
2 = WH
Q
Q no function
3 = BU - (M)
4 = BK Q
Q
Q
Q
Tabelle 12: DC
WTx4Fx- xx311xx0Zxx xx312xx0Zxx
1 = BN + (L+)
3 = BU - (M)
4 = BK Q
Q
15 ELEKTRISCHE INSTALLATION
20
8025300.1BBX / 2021-05-12 | SICK
Subject to change without notice
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137

SICK WTB4FT DoubleLine Instruções de operação

Tipo
Instruções de operação