Sentiotec ALASKA CORNER Manual do usuário

ALASKA-C

Version 05/22 item no. 1-030-269

INSTRUCTIONS FOR INSTALLATION

English EN

DE

FR

IT

PL

PT

Solid wood sauna

ALASKA

CORNER

206 x 206 x 204 cm

Table of Contents

1. Preparing for installation 3

1.1. Important note 3

1.2. Tools required 4

1.3. Maintenance and cleaning 5

1.4. Disposal 5

1.5. ALASKA CORNER parts list 6

2. Cabin installation 8

2.1. Base frame installation 8

2.2. Wall element assembly 9

2.3. Ceiling installation 17

2.4. Ventilation slit installation 19

2.5. Installinginteriorttings 19

2.6. Installing accessories 26

2.7. Installing glass door 28

2.8. Installing roof trim 30

2.9. Installing ceiling cover slat 31

3. Floor plan 32

3.1. Leftoorplan 32

3.2. Rightoorplan 33

3.3. Changesfortherightoorplaninstallation 34

EN

Instructions for installation p. 3/36

1. Preparing for installation

Read these assembly instructions carefully and keep them within reach when

using the sauna so that you can look up product information at any time.

1.1. Important note

●Before you begin work, check the parts list to ensure that all the individual

parts have been delivered. If you discover any missing parts, notify your

dealer within 14 days of receiving the sauna cabin.

●The room that the sauna is installed in must be dry and ensure an appropriate

amount of air circulation.

● Theoormustbelevelandeven,preferablyastoneortiledoor.

●A minimum room height of 230 cm is required for the cabin installation work.

●A distance of at least 5 cm from the wall must be maintained.

●The inside of the wooden parts used must not be handled with any impreg-

nating material.

●Wood is a natural product that can swell, shrink or warp, despite good stor-

age. For this reason, some force may be necessary during the installation.

●Air circulation in the sauna cabin is crucial for correct function. Please observe

thedimensionsfortheairintakeandoutletventsspeciedbythemanufacturer

of the sauna heater. If necessary, cut a rectangular cutout into the base frame

before installation; holes can also be made later using a drill.

● Allscrewttingsmustbepre-drilled.

●You need an assistant for assembly.

Attention!

The electrical connection may only be performed by a qualied electrician

or similarly qualied person.

These installation instructions can also be found in the downloads section

of our website: www.sentiotec.com/downloads.

Instructions for installation p. 4/36

This symbol indicates tips and useful information

Pre-drill

Cut to real measurement with backsaw

60 cm

80 cm

100 cm

Check the right angle:

Handle glass with care: Special care must be taken with the edges of

the glass – hardened glass can shatter into small pieces in the event of

impact. Insert protective cushioning (e.g: cardboard box) under the edge

of the glass.

1.2. Tools required

●Hammer with a wooden head or a mallet

●Cordless screwdriver with bits for cross-head screws and Torx

●Roller tape measure

●Drill bits with a diameter of 3 mm, 10 mm, 20 - 30 mm

(for sauna heater power cable)

●Spirit level

●1.5 mm hexagonal socket wrench

●Utility knife

●Ladder

●Backsaw

EN

Instructions for installation p. 5/36

1.3. Maintenance and cleaning

●The sauna should be cleaned with a damp cloth. Only use warm water – no

cleaning products.

●We recommend heating the cabin once a month if the sauna is not used for

a long time.

Pitch pockets are not grounds for return, since they can always appear in

spruce wood and the depth at which they lie cannot be detected during

the sorting-out process.

If these are just under the surface, heat can cause them to soften and

“bleed”.

The leaking pitch can be removed with a rag soaked in acetone. If only

droplets of pitch occur, allow these to harden and then carefully scrape

themowithaknife.

1.4. Disposal

●Please dispose of packaging materials in accordance with the appli-

cable disposal regulations.

●Used units contain reusable materials as well as hazardous substanc-

es. Therefore, do not dispose of your used unit with household waste,

but rather do so in accordance with the locally applicable regulations.

Instructions for installation p. 6/36

Base frame

2 Base frame 204 x 9 x 4 cm

1 Base frame 138 x 9 x 4 cm

1 Base frame 61.2 x 9 x 4 cm

Wall elements

4 A/B wall elements 193 x 48 x 4 cm

3 A/B wall elements with Multiclip 193 x 48 x 4 cm

1 A/A electrical element with Multiclip 193 x 44 x 4 cm

1 A/B ventilation element with Multiclip 193 x 48 x 4 cm

1 A/A wall element with Multiclip 193 x 44 x 4 cm

1 A/A wall element 193 x 44 x 4 cm

1 A/A wall element with Multiclip 193 x 55.2 x 4 cm

1 Element above the door 69.3 x 10.1 x 4 cm

1 Element above the glass element 72.3 x 8.6 x 4 cm

Ceiling elements

2 A/B ceiling elements 194 x 48 x 4 cm

1 A/B ceiling element 194 x 49 x 4 cm

1 A/A ceiling element, diagonal 186 x 49 x 4 cm

Corner posts

3 90° corner posts with Multiclip 193 x 6 x 6 cm

1 45° corner posts next to door with Multiclip 202 x 7.8 x 4 cm

1 45° corner posts next to door with groove 202 x 7.8 x 4 cm

1

Post for glass element, 8 mm groove with Multiclip

202 x 4.5 x 4 cm

Support slats

1 Roof support slat 197 x 4 x 4 cm

1 Roof support slat 193 x 4 x 4 cm

2 Roof support slat 1 x 45° 141.6 x 4 x 4 cm

1 Roof support slats 2 x 45° 89.7 x 4 x 4 cm

1 Roof support slat 196 x 1.2 x 4 cm

1 Roof support slat 192 x 1.2 x 4 cm

2 Roof support slat 1 x 22.5° 141.2 x 1.2 x 4 cm

1 Roof support slat 1 x 22.5° 83.2 x 1.2 x 4 cm

1 Bench support slat 1 x 45° 142.3 x 4 x 4 cm

1 Bench support slat 120 x 4 x 4 cm

3 Bench support slats 58 x 4 x 4 cm

2 Mounting slats for bench screen 26 x 4 x 4 cm

1.5. ALASKA CORNER parts list

No. of

items Name Dimensions

EN

Instructions for installation p. 7/36

No. of

items Name Dimensions

Interior ttings

2 Benches 195 x 62 x 9 cm

1 Bench 133.5 x 62 x 9 cm

1 Bench cover strip 72.3 x 14 x 2 cm

2 Backrests 186 x 26 x 5 cm

1 Bench screen 195 x 35 x 5 cm

1 Heater safety guard, 3 parts 57 x 475 x 75 cm

1 x 57 x 75 cm, 2x 45.5 x 55 cm

1 Floor grid 70 x 53 x 4 cm

2 Headrests 43 x 25 x 7 cm

1 Lamp protection grille 38 x 32 x 4 cm

1 Ventilation slit 52 x 14 x 1.5 cm

Glass elements

1 Glass door 191.5 x 68 x 0.8 cm

1 Glass element 194.5 x 75.5 x 0.8 cm

Roof trim slats

2 Roof trim slat 1 x 22.5° 149.8 x 6 x 4 cm

1 Roof trim slat 1 x 22.5° 86.5 x 6 x 4 cm

Accessories

1Ualuminiumprole 72.3 x 1.2 x 1.5 cm

1 Door handle set wood/stainless steel

1 2 door hinges 8653-02

1 Door magnet, sleeve plate

1 Sauna lamp

1 3 Silicon cables: 5 x 2.5 mm2

1 3 Silicon cables: 3 x 1.5 mm2

1 Template for Multiclip installation

1 Installation material set

1 Installation instructions

Instructions for installation p. 8/36

2. Cabin installation

Thecabincanhavearightorleftset-up;pleasenotethecorrespondingoor

plans on page 32 and page 33.

2.1. Base frame installation

Left oor plan

Right oor plan

204 cm

61.2 cm

138 cm

204 cm

138 cm

204 cm

61.2 cm

3 mm drill bit, 3 screws 4 x 70 mm

EN

Instructions for installation p. 9/36

2.2. Wall element assembly

The corner posts are connected to the wall elements using Multiclips. The other

wall elements are connected tongue and groove and are screwed together.

Left oor plan

*

* *

*

* Multiclips

Attention!

Theinstallationsubsequentlydescribedisfortheleftoorplan.

Forchangesaectingtheinstallationfortherightoorplan,seepage33.

* *

A always refers to the visible side. This is labelled on the top side of the

wall elements.

Instructions for installation p. 10/36

Pre-assemblethewallelementswiththecornerpostsontheoorand

then place these posts on the base frame.

Insert the corner post from above down onto the wall elements. When doing this,

ensure that the Multiclips are correctly aligned (see below). The corner post must

beushwiththewallelements.

Multiclip

Installing corner posts with wall elements

EN

Instructions for installation p. 11/36

Installing wall elements

Electrical element

The electrical element has drill holes for laying cables. For the position

seeoorplansonpage32andpage33.

Instructions for installation p. 12/36

Screwing wall elements together

3 mm drill bit, 8 screws 4 x 70 mm

Check the right angle before screwing the wall elements together.

Observe the tip on page 4.

EN

Instructions for installation p. 13/36

Corner post and post for glass

Instructions for installation p. 14/36

Glass element

3 mm drill bit,

1 screw 4 x 70 mm

3 mm drill bit,

1 screw 4 x 70 mm

EN

Instructions for installation p. 15/36

Element above the door

3 mm drill bit,

1 screw 4 x 70 mm

3 mm drill bit,

1 screw 4 x 70 mm

Instructions for installation p. 16/36

EN

Instructions for installation p. 17/36

2.3. Ceiling installation

Roof support slats

4 cm

Screws 4 x 70 mm

Instructions for installation p. 18/36

Ceiling elements

3 mm drill bit, 19 screws 4 x 70 mm

1 cm

17 screws 4 x 70 mm

49 cm 48 cm

48 cm 49 cm

EN

Instructions for installation p. 19/36

2.4. Ventilation slit installation

2.5. Installing interior ttings

Bench support slats

2 screws 4 x 60 mm

3 mm drill bit, 3 screws 5 x 70 mm

3 mm drill bit, 4 screws 3 x 40 mm

82 cm

Instructions for installation p. 20/36

3 mm drill bit, 3 screws 5 x 70 mm

36 cm

82 cm

3 mm drill bit, 3 screws 5 x 70 mm

A página está carregando...

Sentiotec ALASKA CORNER Manual do usuário

Sentiotec ALASKA CORNER Manual do usuário

em outras línguas

Artigos relacionados

Outros documentos