Infiniton HCT-200 Manual do usuário

"

-

·,

CONVECTOR DE CALOR CON FUNCIÓN TURBO

CONVECTOR HEATER WITH TURBO FUNCTION

CONVECTOR DE CALOR COM FUNÇÃO TURBO

HCT-200

User's manual / manual de instrucciones / manual de instruçoes

Precaución: lea y conserve estas importantes instrucciones

Caution: please read and preserve these important instructions

This product is only suitable for well insulated spaces or occasional use.

Este producto solo es adecuado para espacios cerrados o uso ocasional.

Este produto só é adequado para espaços bem isolados ou uso ocasional.

Instrucciones de seguridad

•Para conocer las instrucciones acerca de la

instalación, consulte la sección "MONTAJE DEL

CALEFACTOR" en la página 6 del manual.

•Lea las INSTRUCCIONES DE SEGURIDAD antes de

utilizar el calefactor.

• IMPORTANTE: Lea detenidamente estas

instrucciones antes de utilizar el calefactor.

Guarde estas instrucciones para futuras

consultas.

•NOTA: Estos calefactores están concebidos para

un uso portátil en interiores únicamente.

•No utilice el calefactor como un aparato portátil

si sus patas no están correctamente acopladas.

• Asegúrese de que el voltaje de la toma

de corriente a la que vaya a enchufar el

calefactor corresponda con el de la placa de

especificaciones del aparato y que la toma

cuente con conexión a tierra.

•Mantenga el cable de alimentación alejado del

cuerpo del calefactor, ya que éste se calienta.

•No utilice el calefactor cerca de una bañera, una

ducha o una piscina.

•No lo utilice en exteriores.

ES-1

ES-9

V0518

Security instructions

• For instructions on installation, refer to the section

"HEATER ASSEMBLY" on page 6 of the manual.

• Read the SAFETY INSTRUCTIONS before using the

heater.

• IMPORTANT: Read these instructions carefully before

using the heater. Save these instructions for future

reference.

• NOTE: These heaters are designed for indoor use

only.

• Do not use the heater as a portable device if its legs

are not properly attached.

• Make sure the voltage of the outlet

The current to which the heater will be connected

corresponds to that of the appliance's rating plate and

that the socket has a ground connection.

• Keep the power cord away from the heater body, as

it heats up.

• Do not use the heater near a bathtub, shower or

pool.

• Do not use on outdoors.

• Do not cover or obstruct any hot air outlet grilles

or the air inlet slots of the heater.

• Do not place the heater on long-haired carpets.

• You should not place the heater directly below an

outlet.

• Always make sure you place the heater on a flat,

firm surface. Make sure the heater is not near

curtains or furniture, as this could cause a fire

hazard.

• Do not place the heater in front of an outlet, or

directly below it.

• Do not insert any object in the grids

of hot air outlet or in the air inlet grilles of the

heater.

• Do not use the heater in areas where flammable

liquids are stored or where flammable gases may

be present.

• Special care should be taken when placing the

heater in a room occupied by children or disabled

persons.

• Always unplug the heater when moving it from

one place to another.

WARNING: In order to avoid overheating, do

not cover the heater.

• Children under 3 years of age should stay away

from the appliance, unless they have continuous

supervision by an adult.

• Children between the ages of

3 and 8 years can only turn on and off

the device if they are supervised or have received

instructions regarding the use of the device

safely and understand the risks that this implies; and

as long as the device

is placed or installed in its normal operating position

for which it has been designed. Children between the

ages of 3 and 8 should not plug in, adjust or clean the

device or perform general maintenance tasks by the

user.

• CAUTION: Some parts of this product may reach

very high temperatures and cause burns. Special

attention should be paid to children and vulnerable

people when they are present.

• CAUTION: In order to avoid unnecessary risks due

to the accidental restart of the thermal switch, do

not connect the appliance to the mains power

supply.

through external switching devices (eg a timer), or a

circuit that is regularly turned on and off by said

device.

•If the power cord is damaged, it must be replaced by

the manufacturer, its technical service or a person duly

qualified to do so in order to avoid unnecessary risks.

• This device can be used by children over 8 years of age

and people with reduced physical, sensory or mental

abilities or without the necessary experience and

knowledge if they are supervised or have received

instructions regarding the use of the device safely and

understand the risks what this implies

• Children should not be allowed to play with the

appliance.

• Cleaning and maintenance operations by the user can

not be carried out by children, unless they are supervised

by an adult.

CONGRATULATIONS!

Thanks for your purchase. For more convenience in the use of your

new device, we advise you to read this instruction manual carefully

and keep it.

Packing content

•Heater unit

•Legs

•Screws

•Manual

characteristics

HEATER SWITCHES

FAN

THERMOSTAT

CONTROL PANEL

Technical specifications

· Nominal voltage: 230V ~ 50 / 60Hz

· Nominal power: 2000W

· Class of insulation: I

Installation of the heater

Before using the heater,

you must attach the legs

(supplied separately

in the box) to the unit. You must dock

The legs to the base of the heater

with the 8 screws supplied,

making sure they are placed

correctly at the lower ends of the side

moldings of the heater.

NOTE: It is normal that heaters that are lit for the first time, or when

they are turned on again after a long period of time without having

used them, give off some smell of smoke. These will disappear when

the heater is on for a period of time.

1. Choose a suitable place to place the heater, taking into account the

safety instructions indicated above.

2. Connect the plug of the heater to a suitable outlet.

3. Turn the thermostat knob fully clockwise until the maximum setting

is selected.

4. Turn on the heater components, using the rocker switches on the

side panel. When the heating components are on, the switches will

illuminate. To get the maximum hot air out, both switches must be on.

Functioning

5. When the room has reached the desired temperature, you should

slowly turn the thermostat knob counterclockwise until a click is heard

and the light switches on the components switches off. Next, the

heater will maintain the air temperature in the room at the selected

temperature, turning on and off automatically.

6. In the minimum position (turned completely counterclockwise), the

thermostat provides frost protection. In this position (depending on the

size of the room) the heater will maintain the temperature above zero

degrees.

Fan switch: Controlled by the switch that contains the fan symbol on

the side. The fan only works with the thermostat in the on position and

can be used when the heating components are on, to give off hot air in

the room. In warm environments, the fan can be used with the heating

elements turned off, to give off cold air in the room.

Cleaning and maintenance

Always unplug the heater from the outlet and allow

the appliance to cool before cleaning.

Wipe the outside of the heater with a damp cloth and

wipe it off with a dry cloth. Do not use abrasive

detergents or allow water to enter the heater.

Instruções de segurança

• Para instruções sobre a instalação, consulte a

seção "CONJUNTO DO AQUECEDOR" na página 6

do manual.

• Leia as INSTRUÇÕES DE SEGURANÇA antes de

usar o aquecedor.

• IMPORTANTE: Leia atentamente estas instruções

antes de usar o aquecedor. Guarde estas

instruções para referência futura.

• NOTA: Estes aquecedores são projetados apenas

para uso interno.

• Não use o aquecedor como um dispositivo

portátil se as pernas não estiverem bem fixadas.

• Certifique-se de que a voltagem da tomada

A corrente à qual o aquecedor será conectado

corresponde à da placa de classificação do

aparelho e que o soquete tem uma conexão de

aterramento.

• Mantenha o cabo de alimentação longe do corpo

do aquecedor, enquanto ele se aquece.

• Não use o aquecedor perto de uma banheira,

chuveiro ou piscina.

• Não use ao ar livre.

• Não cubra ou obstrua as grelhas de saída de ar

quente ou as ranhuras de entrada de ar do

aquecedor.

• Não coloque o aquecedor em tapetes de cabelo

comprido.

• Você não deve colocar o aquecedor diretamente

abaixo de uma tomada.

• Certifique-se sempre de colocar o aquecedor em

uma superfície plana e firme. Certifique-se de que o

aquecedor não esteja perto de cortinas ou móveis,

pois isso pode causar um risco de incêndio.

• Não coloque o aquecedor em frente a uma tomada

ou diretamente abaixo dela.

• Não insira nenhum objeto nas grades

de saída de ar quente ou nas grelhas de entrada de

ar do aquecedor.

• Não use o aquecedor em áreas onde líquidos

inflamáveis são armazenados ou onde gases

inflamáveis possam estar presentes.

• Cuidados especiais devem ser tomados ao colocar

o aquecedor em uma sala ocupada por crianças ou

pessoas com deficiência.

• Sempre desconecte o aquecedor ao movê-lo de um

lugar para outro.

A página está carregando...

Infiniton HCT-200 Manual do usuário

Infiniton HCT-200 Manual do usuário

em outras línguas

Artigos relacionados