1. Fasten the crossbar to the outlet box with two outlet box screws.
2. Connect the black to black (power), white to white (neutral) and brass wire to ground wire with
supplied wire connectors.Tuck all wires into outlet box.
3. Mount the canopy onto the mounting bracket and secure it with the canopy screws.
4. Adjust the appropriate height by pressing the elevator (a) up and down the active wire (b)
with the tool or thumb.
N(White)
Ground wire
Junction box
(not included)
a
b
L(Black)
1
2
3
4
Note: this product is suitable for dimming switch
Brand Model Brand Model
Lutron
Lutron
Lutron
Lutron
CTCL-153P
MACL-153M
DVCL-153P
TGCL-153P
Lutron PD-6WCL
Leviton 6672-1L
Installation Instructions
Instructions d’installation
ITEM NO:P2022051
P2022052
P2022053
WARNING - ATTENTION
Luminaires must be installed by a certified electrician. Check with local and national codes for proper installation.
To prevent electrical shock, disconnect electrical supply before installation or servicing.
Les luminaires doivent être installés par un électricien certifié. Vérifier les normes et les codes du bâtiment de votre région.
Pour réduire les risques d’électrocution lors de l’installation ou de l’entretien, couper l’alimentation électrique.