Omron UMA Safety Mat and Trim Manual do proprietário

Yes No

UMA Custom Safety Mat Layout Form

OMRON AUTOMATION AND SAFETY • THE AMERICAS HEADQUARTERS • Chicago, IL USA • 847.843.7900 • 800.556.6766 • www.omron247.com

2. Is a trim kit required?

4. Tolerances (If no tolerances are specified and layout dimensions are within

an inch, standard mats will be provided. - min. 1/2 inch)

5. Ramp trim: Standard is TKM: 2-part PVC ramp trim, please specify

alternate ramp trim if required. (TKA: 1-part aluminum, TKAT: 2-part aluminum)

6. Has blunt trim been specified? (TKB is used to butt up against walls or

machines, if none has been specified then the default will be ramp trim.)

7. Mat Color: Standard is black unless specified, alternative: yellow

8. Control Panel Location: Please indicate on the sketch the location of the control

panel to ensure shortest routing of cables.

Control panel

indicated?

CHECKLIST: Please complete before submitting

Please specify:

Use "R" for TKM, TKAT Ramp Trim (Adds 2.75 in. (69.9 mm) to over all dimension)

Use “R” for TKA Ramp Trim (Adds 2.5 in. (63.5 mm) to over all dimension

Use “B” for TKB Blunt Trim (Adds 1 in. (25.4 mm) to over all dimension)

OPTIONAL:Use “J” for Joining Trim (Adds 1.41 in. (35.8 mm) between mulitple mats.

Omron makes ordering custom mats and trims easy. Simply fill out this form with a sketch of your layout including dimensions. Make note

of where you want ramp trim or blunt trim. We will work from your sketch to creat ia detailed drawing of your specifications.

1. Mat Cable Connections: 2-Cable

1-Cable

Note: Please make sure your sketch is fully defined and all of your

dimensions add up. Smallest top mat surface dimensions is 10 inches.

Maximum single mat size is 48 in. x 72 in. Larger sizes will consist of

multiple mats and will require Joining Trim between mats.

Customer Name:

Machine Type:

Industry:

Please specify:

Please indicate on

sketch of specify:

Corners

TKM TKA TKAT

TKC

Miltred Molded (TKC)

Black Yellow

*

3. Do sketch dimensions include trim? If “yes”, layout dimensions do not change.

If “no”, layout equals top mat surface(s) & overall dimensions increase.

Tips and Suggestions:

1. If possible, design custom layout around off-the-shelf standard mats (more affordable). Be clear on concept: "Do

sketch dimensions include trim?" If customer layout sketch dimensions do not include trim, then overall dims increase

by width of trim. If sketch dims are max (and do include trim), then mat size "shrinks" by width of trim. See Page 8.

2. Be sure to specify unit of measurement: inch, feet, mm, cm, etc.

3.Trim vs. No Trim. Trim is recommended. It secures mats to floor and ramp prevents tripping.

4. Multi-mat layouts require joining trim, creating a "dimensional space" of 1.41" between top mat surfaces. But

"Active" Joining Trim design allows for seamless activation across mat "gaps".

5. Perimeter Trim Types:

TKM: Ramp Trim, "Active", Alum Base & PVC Cover w/Mitered Corners.

TKAT: Ramp Trim, "Active", Two-Part Aluminum with Mitered Corners.

TKC: Perimeter Ramp Trim, "Active", Alum Base & PVC Cover w/ Molded Corners.

TKA: Ramp Trim, "Not-Active", One-Part Aluminum with Mitered Corners.

TKB: Blunt Trim, "Not-Active", One-Part Aluminum with Mitered Corners. Blunt Trim should only be used on mat

sides without foot traffic; may create tripping hazard.

6. Mats should not be smaller than 10".

7. See pages 15 & 18 if user wants to buy bulk and machine their own trim.

These two front pages of the "UMA Custom Safety Mat Layout Form" are a preface to "CAT-30902a, UMA Mat

and Trim Guide", Pages 1 thru 28, an in-depth instructions for ordering and designing mat trim layouts

Yes No

± 1 inches

Yes No

UMA Custom Safety Mat Layout Form

OMRON AUTOMATION AND SAFETY • THE AMERICAS HEADQUARTERS • Chicago, IL USA • 847.843.7900 • 800.556.6766 • www.omron247.com

EXAMPLE



2. Is a trim kit required?

4. Tolerances (If no tolerances are specified and layout dimensions are within

an inch, standard mats will be provided. - min. 1/2 inch)

5. Ramp trim: Standard is TKM: 2-part PVC ramp trim, please specify

alternate ramp trim if required. (TKA: 1-part aluminum, TKAT: 2-part aluminum)

6. Has blunt trim been specified? (TKB is used to butt up against walls or

machines, if none has been specified then the default will be ramp trim.)

7. Mat Color: Standard is black unless specified, alternative: yellow

8. Control Panel Location: Please indicate on the sketch the location of the control

panel to ensure shortest routing of cables.

Control panel

indicated?

CHECKLIST: Please complete before submitting

Please specify:

Use "R" for TKM, TKAT Ramp Trim (Adds 2.75 in. (69.9 mm) to over all dimension)

Use “R” for TKA Ramp Trim (Adds 2.5 in. (63.5 mm) to over all dimension

Use “B” for TKB Blunt Trim (Adds 1 in. (25.4 mm) to over all dimension)

OPTIONAL:Use “J” for Joining Trim (Adds 1.41 in. (35.8 mm) between mulitple mats.

125 in.

60 in.

36 in.

32 in.

28 in.

R.

Omron makes ordering custom mats and trims easy. Simply fill out this form with a sketch of your layout including dimensions. Make note

of where you want ramp trim or blunt trim. We will work from your sketch to creat ia detailed drawing of your specifications.

1. Mat Cable Connections: 2-Cable

1-Cable



Note: Please make sure your sketch is fully defined and all of your

dimensions add up. Smallest top mat surface dimensions is 10 inches.

Maximum single mat size is 48 in. x 72 in. Larger sizes will consist of

multiple mats and will require Joining Trim between mats.

Customer Name: Barnett Industries

Robotic Assembly

Automotive

Machine Type:

Industry:

Please specify:

Please indicate on

sketch of specify:

Corners

TKM TKA TKAT

TKC

Miltred Molded (TKC)

Black Yellow



*

3. Do sketch dimensions include trim? If “yes”, layout dimensions do not change.

If “no”, layout equals top mat surface(s) & overall dimensions increase.

89 in.

R.

These two front pages of the "UMA Custom Safety Mat Layout Form" are a preface to "CAT-30902a, UMA Mat

and Trim Guide", Pages 1 thru 28, an in-depth representation for ordering and designing mat trim layouts

A página está carregando...

Omron UMA Safety Mat and Trim Manual do proprietário

Omron UMA Safety Mat and Trim Manual do proprietário

em outras línguas

Artigos relacionados

Outros documentos