Anspach QD14-S-G1 Assembly And Disassembly

English

G1 High Speed Attachments

Assembly and Disassembly

English

Contents

General Information ..........................................................2

Straight Attachments ........................................................7

Craniotome Attachments ..................................................8

QD Angle Attachments .....................................................9

Minimal Access Attachment and

Bearing Sleeves .............................................................10

Perforator Driver Attachment ..........................................12

2

English

General Information

Device Description

Attachments designed for use with the Anspach G1 High Speed System and G1

Dissection Tools.

Indications for Use

Cutting and shaping bone including spine and cranium.

System Assembly

Refer to the Anspach eG1 High Speed System instructions accompanying the

specic device.

Cleaning and Sterilization

• Prior to rst use the equipment must be processed as per the included

Anspach G1 High Speed System Cleaning and Sterilization instructions.

• At the point of use the device must be cleaned as soon as possible after use

to prevent drying of blood, tissue, other biological debris and contaminants

on the device.

• Refer to the Anspach G1 High Speed System Cleaning and Sterilization

instructions accompanying this device.

Attachment and Dissection Tool Selection

To assist in identifying the correct attachment and dissection tool combination,

attachments have color bars at proximal end that correspond with color bars on

dissection tool package labels as shown in Table 1 below.

Table 1

Attachment Color Bars Category

SHORT-G1 YELLOW / YELLOW Straight Attachment

QD8-G1 BLACK / YELLOW QD Angle Attachment

QD8-S-GI BLACK / YELLOW QD Angle Attachment

MEDIUM-G1 ORANGE / ORANGE Straight Attachment

QD11-G1 BLACK / ORANGE QD Angle Attachment

QD11-S-G1 BLACK / ORANGE QD Angle Attachment

LONG-G1 RED / RED Straight Attachment

QD14-G1 BLACK / RED QD Angle Attachment

QD14-S-G1 BLACK / RED QD Angle Attachment

MIA16-G1 BLACK / BLACK Straight Attachment

SHORT-HD-G1 LIGHT BLUE / GREEN Straight Attachment

MEDIUM-HD-G1 LIGHT BLUE / YELLOW Straight Attachment

LONG-HD-G1 LIGHT BLUE / BLUE Straight Attachment

CRANI-A-G1 GREEN / GREEN Craniotome Attachment

CRANI-P-G1 TURQUOISE / TURQUOISE Craniotome Attachment

CRANI-L-G1 GOLD / GOLD Craniotome Attachment

MA-D20-G1 NA Minimal Access Attachment

CSR60-G1 NA Perforator Driver Attachment

3

English

Symbols

Anspach Product Icon Reference Number

(A.K.A. Item Number,

Catalog Number, Part

Number)

Indicates the

attachment setting,

refer to MA-D20-G1

section in this document

for further details.

Lot (A.K.A. Lot

Number, Batch

Number, Batch Code)

Indicates position,

alignment, or location.

(Color: Black or Red)

Serial Number

Indicates position or

location

Temperature Limits

Direction of rotation

00/0000

Use By Date (A.K.A.

Expiration Date,

Expiry)

Run; System ready to

operate.

Manufacturer

Load; Insert attachment

and/or burr. System will

not operate.

Authorized European

Union Representative

Consult Operating

Instructions

Sterilized Using

Irradiation

CAUTION: Refer

to accompanying

documentation

Single Use Only

(A.K.A. Do Not Reuse)

Indicates position,

alignment, or location.

(Color: Black or Red)

Keep Dry (A.K.A.

Protect from Moisture)

DO NOT DISPOSE

OF IN HOUSEHOLD

WASTE

Sterile unless damaged

or open

United States Federal

law restricts this device

to sale by or on the

order of a physician or

other licensed health-

care provider

0086

CE Mark (A.K.A. CE

Mark [notied body

number], Conformité

Européenne) Meaning:

Device complies

with applicable EEC

Directives

4

English

Warnings

• ∆ Always use continuous irrigation to prevent heat build-up. Irrigation is

necessary for proper performance.

• Prior to rst use the equipment must be processed as per the included

Anspach G1 High Speed System Cleaning and Sterilization instructions.

• Do not use a dissection tool without an attachment, injury may occur.

• Only Use G1 Dissection Tools. Using other than indicated dissection tools

may lead to injury.

• Use the indicated dissection tool for the attachment, injury may occur.

• Surgeon is responsible for learning proper techniques in use of equipment;

improper use may cause serious injury to user or patient or damage to system.

• Instrument operator and all operating room personnel must wear eye

protection.

• Visually inspect for damage before using; do not use if damage is evident.

• Do not use if the product sterilization barrier or its packaging is compromised.

• Do not use, or discontinue use of powered equipment exhibiting excessive

temperatures that can cause patient injury (necrosis) and/or user discomfort.

• Use of damaged or improperly maintained power equipment and/or misused

powered equipment can result in excessive temperatures.

• Use caution to avoid cutting or tearing gloves while handling dissection tools.

• Dissection tools must be adequately retained within attachment to prevent

distal migration, which may cause injury. Conrm attachment is proper size

for dissection tool and that it is secure.

• Gently pull on dissection tool shaft to ensure it is fully seated and properly

installed.

• Only cut visible areas unless an image intensier is utilized.

• Delicate structures in proximity to dissection must be thoroughly protected to

prevent injury.

• Maintain rm control of instrument at all times.

• Do not bend or use as a lever.

• Use a gentle tapping motion or side-to-side motion and let instrument do cutting.

• Do not use excessive force.

• Forceful side loading of dissection tool may cause fracture of dissection tool,

which may cause injury.

• Use standard protocol for disposal of sharp instruments.

• Dissection tools are disposable and intended for single patient use only. Do

not re-sterilize and/or re-use dissection tools.

• Continuous extreme cutting at or near stalling conditions will quickly overheat

handpiece.

• Do not operate in an explosive ammable environment.

• Do not modify ground or power cord.

• Do not allow liquid into console.

• Use of accessories or cables other than those provided by DePuy Synthes

Power Tools and specied for use with eG1 System may result in increased

emissions or decreased immunity.

5

English

• The eG1should not be used adjacent to or stacked with other

equipment and that if adjacent or stacked use is necessary, the eG1

should be observed to verify normal operation in the conguration in

which it will be used

• Medical Electrical Equipment needs special precautions regarding

EMC and needs to be installed and put into service according to the

EMC information provided in this accompanying documentation.

• Portable and Mobile RF communications equipment can affect

Medical Electrical Equipment.

• Power source should comply with applicable IEC, CEC, and NEC

requirements. Grounding reliability can only be achieved when this

equipment is connected to a receptacle marked “HOSPITAL GRADE.”

• Do not use in oxygen rich environment.

• No modication of this equipment is allowed.

• Do not modify. Modications could result in loss of electrical safety.

• Dispose of items contaminated with body uids with other

biohazardous waste.

• At end of life recycle or dispose of device in accordance with local and

national regulations.

• To avoid the risk of electric shock, this equipment must only be

connected to a supply main with protective earth. The use of

Accessories, transducers, and cables other than those specied, with

the exception of transducers and cables sold by the Manufacturer of

this device as replacement parts for internal components, may result

in increased Emissions or decreased Immunity of the eG1 System.

Cautions

• United States Federal law restricts this device to sale by or on order of

a physician or other licensed healthcare provider.

• Do not use handpiece without an attachment and dissection tool properly

locked in place. Damage to the burr lock mechanism could occur.

• Do not use accessories other than those provided by DePuy Synthes

Power Tools and specied for use with Anspach Systems.

• To insure equipment operates as designed, read and follow

manufacturer’s instructions.

• Do not operate handpiece without an attachment and the

corresponding dissection tool.

• Only Anspach G1 Dissection Tools should be used with G1 Systems.

•

Use care to protect hose when handling, cleaning, and during system use.

• Damage to hose can cause leaking, rupture, or other related failures.

• Do not step on, set equipment on, pinch, kink, clamp, or otherwise

occlude handpiece hose during use.

6

English

Latex Information

Not made with natural rubber latex.

Warranty & Return Policies

Warranty and return policy is available upon request.

Warning: All Instrument System components returned for servicing or repair should

be properly cleaned and sterilized as applicable prior to shipping.

Warning: Transmissible Spongiform Encephalopathies (TSE)

DePuy Synthes Power Tools will not authorize or accept the return of products

that directly contact patients or are contaminated with a patient’s body uids who

is suspected or conrmed with a Transmissible Spongiform Encephalopathies/

Creutzfeldt-Jakob Disease (TSE/CJD) diagnosis. DePuy Synthes Power Tools

recommends that all Anspach products used on a patient conrmed with a

TSE/CJD diagnosis be incinerated. Anspach dissection tools used on a patient

suspected of TSE/CJD diagnosis must be incinerated.

Contact your Sales Representative for replacement of product incinerated under

this policy or for temporary equipment while original equipment is quarantined.

Contact the DePuy Synthes Power Tools Customer Service Department

regarding TSE/CJD contamination for additional information.

7

English

Straight Attachments

Note: When following these instructions hold handpiece and attachments

with distal end pointing away from user.

Assembly

1. Conrm indicator bar on distal end of handpiece is aligned with

unlock symbol (Figure 1) before attempting to install attachment. If

not aligned properly, hold handpiece housing rmly with one hand and

with other hand rotate distal end in direction of arrow to align indicator

bar with unlock symbol.

2. Slide attachment over distal end of handpiece aligning arrow on

attachment with indicator bar and unlock symbol (Figure 2). Pull back

rmly until fully seated against handpiece.

3. Rotate attachment in direction of arrow on handpiece to align arrow

on attachment with lock symbol (Figure 3).

4. Insert dissection tool into distal end of attachment and rotate

dissection tool slowly until fully seated.

5. Gently pull on dissection tool to ensure proper engagement.

Note: Handpiece is now fully functional.

Disassembly

1. Rotate attachment to align arrow with unlock symbol (Figure 4).

2. Remove dissection tool from attachment.

3. Remove attachment from handpiece.

Indicator Bar

Figure 3

Figure 2

Figure 4

Figure 1

8

English

Craniotome Attachments

Note: When following these instructions hold handpiece and attachments with

distal end pointing away from user.

Assembly

1. Conrm indicator bar on distal end of handpiece is aligned with unlock symbol

(Figure 1) before attempting to install attachment. If not aligned properly, hold

handpiece housing rmly with one hand and with other hand rotate distal end

in direction of arrow to align indicator bar with unlock symbol.

2. Insert dissection tool into distal end of handpiece and rotate dissection tool

slowly until fully seated. (Figure 2).

3. Slide attachment over distal end of dissection tool and handpiece aligning

arrow on attachment with indicator bar and unlock symbol (Figure 3). Pull

back rmly until fully seated against handpiece.

4. Rotate attachment in direction of arrow on handpiece to align arrow on

attachment with lock symbol (Figure 4).

5. Visually inspect to conrm dissection tool is not touching attachment guard.

Note: Handpiece is now fully functional.

Disassembly

1. Hold handpiece rmly in one hand and with other hand push and rotate release

sleeve of attachment until arrow is aligned with unlock symbol (Figure 5).

2. Remove attachment from handpiece.

Warning: Use caution to avoid cutting hands or ngers on dissection tool

when performing this step.

3. Remove dissection tool from attachment.

Figure 3

Figure 4

Release Sleeve

Indicator Bar

Figure 2

Figure 1

Figure 5

9

English

QD Angle Attachments

Warning

Observe the following duty cycle to avoid overheating of this device.

• Employ a duty cycle of 20 seconds ON and 40 seconds OFF for

an unlimited number of cycles at ambient temperatures up to 29°C

(85° F).

Note: When following these instructions hold handpiece and attachments

with distal end pointing away from user.

Assembly

1. Conrm indicator bar on distal end of handpiece is aligned with

unlock symbol (Figure 1) before attempting to install attachment. If

not aligned properly, hold handpiece housing rmly with one hand and

with other hand rotate distal end in direction of arrow to align indicator

bar with unlock symbol.

2. Slide attachment over distal end of handpiece aligning arrow on

attachment with indicator bar and unlock symbol (Figure 2). Pull back

rmly until fully seated against handpiece.

3. Rotate attachment in direction of arrow on handpiece to align arrow

on attachment with lock symbol (Figure 3).

4. Rotate attachment lock sleeve to align arrow with lock symbol

(Figure 4).

5. Insert dissection tool into distal end of attachment and rotate

dissection tool slowly until fully seated.

6. Gently pull on dissection tool to ensure proper engagement.

Note: Handpiece is now fully functional.

Disassembly

1. Rotate attachment lock sleeve to align arrow with unlock symbol

(Figure 5).

2. Remove dissection tool from attachment.

3. Hold handpiece rmly in one hand and with other hand push and

rotate release sleeve of attachment until arrow is aligned with unlock

symbol (Figure 6).

4. Remove attachment from handpiece.

Figure 3

Lock Sleeve

Indicator Bar

Figure 2

Lock Sleeve

Release Sleeve

Figure 1

Figure 4

Figure 6

Figure 5

10

English

Minimal Access Attachment and

Bearing Sleeves

Warning

Observe the following duty cycle to avoid overheating of this device.

• Employ a duty cycle of 20 seconds ON and 40 seconds OFF for an unlimited

number of cycles at ambient temperatures up to 29°C (85° F).

Note: When following these instructions hold handpiece and attachments with

distal end pointing away from user. Minimal Access Attachments are compatible

with multiple bearing sleeve congurations. Instructions are the same for all

bearing sleeve congurations.

The four words labeled on attachment near lock sleeve (Figure 1) mean the

following:

CUTTER— Insert or remove dissection tool.

RUN— Attachment and dissection tool are now functional.

ADJUST— Bearing sleeve can be moved to desired exposure.

TUBE— Insert or remove bearing sleeve.

Assembly

1. Conrm indicator bar on distal end of handpiece is aligned with unlock

symbol (Figure 2) before attempting to install attachment. If not aligned

properly, hold handpiece housing rmly with one hand and with other hand

rotate distal end in direction of arrow to align indicator bar with unlock

symbol.

2. Slide attachment over distal end of handpiece aligning arrow on attachment

with indicator bar and unlock symbol (Figure 3). Pull back rmly until fully

seated against handpiece.

3. Rotate attachment in direction of arrow on handpiece to align arrow on

attachment with lock symbol (Figure 4).

4. Rotate attachment lock sleeve to align arrow with “TUBE” (Figure 1).

5. Insert bearing sleeve into distal end of attachment until fully seated (Figure

5).

6. Rotate attachment lock sleeve to align arrow with “CUTTER” (Figure 1).

7. Gently pull on bearing sleeve to ensure proper engagement.

8. Insert dissection tool into distal end of bearing sleeve and rotate dissection

tool slowly until fully seated.

9. Rotate attachment lock sleeve to align arrow with “RUN” (Figure 1).

Note: Additional force is required to seat dissection tool into curved bearing

sleeves.

10. Gently pull on dissection tool to ensure proper engagement.

Note: Handpiece is now fully functional.

Bearing Sleeve Adjustment

1. Rotate attachment lock sleeve to align arrow with “ADJUST”

(Figure 1).

2. Move bearing sleeve to desired exposure.

3. Rotate attachment lock sleeve to line up arrow with “RUN” (Figure 1).

11

English

Disassembly

1. Rotate attachment lock sleeve to align arrow with “CUTTER” (Figure 1).

2. Remove dissection tool from bearing sleeve.

3. Rotate attachment lock sleeve to align arrow with “TUBE” (Figure 1).

4. Remove bearing sleeve.

5. Hold handpiece rmly in one hand and with other hand push and

rotate release sleeve of attachment until arrow is aligned with unlock

symbol (Figure 6).

6. Remove attachment from handpiece.

Indicator Bar

Lock Sleeve

Figure 3

Figure 2

Figure 1

Figure 4

Release Sleeve

Figure 6

Figure 5

12

English

Perforator Driver Attachment

Note: When following these instructions hold handpiece and attachments with

distal end pointing away from user.

Perforator Driver Attachment is designed to connect to cranial perforators with a

Hudson connection.

Assembly

1. Conrm indicator bar on distal end of handpiece is aligned with unlock

symbol (Figure 1) before attempting to install attachment. If not aligned

properly, hold handpiece housing rmly with one hand and with other hand

rotate distal end in direction of arrow to align indicator bar with unlock

symbol.

2. Slide attachment over distal end of handpiece aligning arrow on attachment

with indicator bar and unlock symbol (Figure 2). Pull back rmly until fully

seated against handpiece.

3. Rotate attachment in direction of arrow on handpiece to align arrow on

attachment with lock symbol (Figure 3).

4. To insert cranial perforator, pull back on lock sleeve at distal end of

attachment, insert cranial perforator until fully seated and release lock sleeve

(Figure 4).

5. Gently pull on cranial perforator to ensure proper engagement.

Note: Handpiece is now fully functional.

Warning: Follow instructions supplied with cranial perforator before use.

13

English

Disassembly

1. To remove cranial perforator, pull back on lock sleeve at distal end of

attachment and remove cranial perforator.

2. Hold handpiece rmly in one hand and with other hand push and

rotate release sleeve of attachment until arrow is aligned with unlock

symbol (Figure 5).

3. Remove attachment from handpiece.

Indicator Bar

Figure 4

Figure 2

Figure 1

Figure 3

Release Sleeve

Figure 5

Lock Sleeve

Deutsch

G1-Hochgeschwindigkeits-

zubehör – Zusammen- und

Auseinanderbau

Deutsch

Inhalt

Allgemeines ....................................................................18

Gerades Zubehör ...........................................................23

Kraniotom-Zubehör.........................................................24

QD-Winkelzubehör .........................................................25

Zubehör und Lagerhülsen für

minimalinvasive Eingriff ..................................................26

Perforatorgriff-Zubehör ...................................................28

Deutsch-German

18

Allgemeines

Produktbeschreibung

Zubehörteile für das G1-Hochgeschwindigkeitssystem und

G1-Dissektionsinstrumente von Anspach.

Indikationen

Schneiden und Formen von Knochen, u. a. auch im Wirbelsäulen-

und Schädelbereich.

Systemzusammenbau

Siehe Anspach-Anweisungen für das eG1-Hochgeschwindigkeitssystem

im Lieferumfang der jeweiligen Vorrichtung.

Reinigung und Sterilisation

• Vor dem erstmaligen Gebrauch müssen die Instrumente gemäß

den im Lieferumfang enthaltenen Anspach-Reinigungs- und

Sterilisationsanweisungen für das Hochgeschwindigkeitssystem G1

aufbereitet werden.

• Nach Gebrauch ist das Gerät unmittelbar zu reinigen, damit Blut- und

Gewebereste sowie Zelltrümmer und Kontaminanten nicht antrocknen

können.

• Siehe Anspach-Reinigungs- und Sterilisationsanweisungen für das

Hochgeschwindigkeitssystem G1 im Lieferumfang dieser Vorrichtung.

Auswahl von Zubehör und Dissektionsinstrumenten

Zubehörteile sind am proximalen Ende farblich gekennzeichnet. Die jeweilige

Farbe entspricht der Codierung auf dem Etikett der Dissektionsinstrumente

und vereinfacht die Identizierung der richtigen Kombination aus Zubehör und

Dissektionsinstrument (siehe Tabelle 1 unten).

Tabelle 1

Zubehör Farbcode Kategorie

SHORT-G1 GELB/GELB Gerades Zubehör

QD8-G1 SCHWARZ/GELB QD-Winkelzubehör

QD8-S-GI SCHWARZ/GELB QD-Winkelzubehör

MEDIUM-G1 ORANGE/ORANGE Gerades Zubehör

QD11-G1 SCHWARZ/ORANGE QD-Winkelzubehör

QD11-S-G1 SCHWARZ/ORANGE QD-Winkelzubehör

LONG-G1 ROT/ROT Gerades Zubehör

QD14-G1 SCHWARZ/ROT QD-Winkelzubehör

QD14-S-G1 SCHWARZ/ROT QD-Winkelzubehör

MIA16-G1 SCHWARZ/SCHWARZ Gerades Zubehör

SHORT-HD-G1 HELLBLAU/GRÜN Gerades Zubehör

MEDIUM-HD-G1 HELLBLAU/GELB Gerades Zubehör

LONG-HD-G1 HELLBLAU/BLAU Gerades Zubehör

CRANI-A-G1 GRÜN/GRÜN Kraniotom-Zubehör

CRANI-P-G1 TÜRKIS/TÜRKIS Kraniotom-Zubehör

CRANI-L-G1 GOLD/GOLD Kraniotom-Zubehör

MA-D20-G1 —— Zubehör für minimalinvasive Eingriffe

CSR60-G1 —— Perforatorgriff-Zubehör

A página está carregando...

Anspach QD14-S-G1 Assembly And Disassembly

Anspach QD14-S-G1 Assembly And Disassembly

em outras línguas

Outros documentos