Yamaha HTR-8063 Manual do proprietário

HTR-8063
Yamaha
Marca
Yamaha
Modelo
HTR-8063
Categoria
Receptores AV
Tipo
Manual do proprietário

Este manual também é adequado para

1
3
2
2
within 6 m
- 1 -
English
Quick Reference Guide
for Canada
E.g. E.g.
Preparing the remote control
■
Accessories
■
Items necessary for connection
The following accessories are supplied with this product.
Speakers
External components
Remote control
Front speaker
E.g. E.g.
Batteries (2)
(AAA, R03, UM-4)
Center speaker
AM loop antenna
Surround speaker, surround back
speaker, and presence speaker
Indoor FM antenna
Active subwoofer
Power cable*
1
Take off the battery compartment cover.
2
Insert the two supplied AAA batteries
into the battery case, following the
polarity markings.
3
Snap the battery compartment cover
back into place.
Be sure to aim the remote control directly at the remote
control sensor on this unit during operation.
TV
Cable
• Cables for connecting external components
(may differ depending on the components you are connecting)
• Speaker cables
(a quantity to match the number of speakers you are connecting)
• Audio pin cable
(for subwoofer)
Playback device such as BD
(Blu-ray Disc)/DVD players
• Use speakers with an impedance of at least 6Ω. 4Ω speakers can also be used as the front speakers. For more information on speaker
impedance, refer to page 3.
• If you are using a CRT monitor, we recommend that you use magnetically shielded speakers.
• Prepare at least two front speakers. The priority of the other speakers is as follows:
1 Two surround speakers
2 One center speaker
3 One (or two) surround back speaker(s)/presence speakers
YPAO microphone
* The  gure of the supplied power cable may differ depending upon regions.
7.1
6.1
7.1
- 2 -
Connect and install as follows the  rst time you use this unit.
See the following explanations for the connections for each number.
1
1
Connect the speakers
2
2
Connect a TV
3
3
Connect playback devices such as BD/DVD players and recorders
4
4
Connect the power cable
5
5
Set up the speaker parameters automatically (YPAO)
This unit
TV
Subwoofer
1
1
1
1
2
2
3
3
4
4
BD/DVD player
(recorder)
Center speaker
Surround
speaker R
Surround
speaker L
Surround back
speaker L
Surround back
speaker
Surround back
speaker R
Front
speaker R
Front
speaker L
7.1
Connect when using with 7.1-channel speaker
layout. Place the surround back speakers
(L/R) 30 cm or more away from each other.
6.1
Connect when using with 6.1-channel speaker
layout. Place the surround back speaker
behind the listening position.
AC
SURROUND SURROUND BACK/
SPEAKERS
CENTER
AV 1 AV 2 AV 3 AV 4
HDMI
AV 5 AV 6 AV 7
SINGLE
FRONT
BI-AMP
AV 3
AV 4
F
RONT
SURROUND
SUR. BACK
SUBWOOFER
CENTER
MULTI CH INPUT
COMPONENT VIDEO
MONITOR OUT/ZONE OUT
ZONE OUT PRE OUT
ZONE 2
YP
B
P
R
P
B
P
R
YP
B
P
R
C
D
SURROUND
SUR. BACK
CENTER
SUBWOOFER
1
2
RS-232C
2
1
TRIGGER
OUT
+12V 0.1A MAX.
FRONT
(1 BD/DVD)
(SINGLE)
ZONE2/
F.PRESENCE
EXTRA SP
IN
OUT
REMOTE
A
C
S
P
E
K
E
R
S
A
V
A
A
1
A
V
A
A
2
A
V
A
A
3
A
V
A
A
4
H
D
M
I
A
V
A
A
5
A
V
A
A
6
A
V
A
A
7
A
V
A
A
3
A
V
A
A
4
F
R
O
N
T
S
U
R
R
O
U
N
D
S
U
R
.
B
A
C
K
S
U
B
W
O
O
F
E
R
C
E
N
T
E
R
M
U
L
T
L
L
I
C
H
I
N
P
U
T
C
O
M
P
O
N
E
N
T
V
I
D
E
O
M
O
N
I
T
O
R
O
U
T
/
T
T
Z
/
/
O
N
E
O
U
T
Z
O
N
E
O
U
T
P
R
E
O
U
T
Z
O
N
E
2
Y
P
B
P
R
P
B
P
R
Y
P
B
P
R
C
D
S
U
R
R
O
U
N
D
S
U
R
.
B
A
C
K
C
E
N
T
E
R
S
U
B
W
O
O
F
E
R
2
R
S
-
2
3
2
C
2
1
T
R
I
G
G
E
R
O
U
T
+
1
2
V
0
.
1
A
M
A
X
.
F
R
O
N
T
(
1
B
D
/
D
V
D
)
(
S
I
N
G
L
E
)
Z
O
N
E
2
/
F
.
F
F
P
R
E
S
E
N
C
E
E
X
T
R
A
S
P
I
N
O
U
T
R
E
M
O
T
E
6.1
7.1 7.1
- 3 -
1
1
Connect the speakers
Front speaker
R L
Subwoofer
Center speaker
R L
Surround back
speaker
R L
Surround
speaker
Connecting speakers
Connecting the subwoofer
1
Connect the subwoofer input jack to the SUBWOOFER
1 jack on this unit with an audio pin cable.
(
S
ING
L
E
)
S
U
B
WO
OFER
PR
E
O
U
T
CE
NT
E
R
CENTER
S
U
R
.
BACKS
U
R
RU
N
D
1
2
FRON
T
• When connecting the presence speakers, refer to “Presence speaker
connection” in the Owner’s Manual.
• This unit can connect speakers that support Bi-amp connection for front
speakers. Refer to “Bi-amp connection” in the Owner’s Manual.
7.1
Connect when using with 7.1-channel speaker layout.
6.1
Connect when using with 6.1-channel speaker layout.
F
RON
T
-
2
2
3
1
4
4
+
1
Remove approximately 10 mm of insulation from
the ends of the speaker cables, and twist the bare
wires of the cables together  rmly so that they will
not cause short circuits.
2
Loosen the speaker terminals.
3
Insert the bare wire of the speaker cable into the
gap on the side of the terminal.
4
Tighten the terminal.
2
Set the subwoofer volume as follows.
Volume: Set to approximately half volume (or slightly less than half).
Crossover frequency (if available): Set to maximum.
Subwoofer examples
VOLUME
MIN MAX
CROSSOVER/
HIGH CUT
MIN MAX
Caution:
• Remove the power cable of this unit from the power outlet before
connecting the speakers.
• Generally speaker cables consist of two parallel insulated
cables. One of these cables is a different color, or has a line
running along it, to indicate different polarity. Insert the different
colored (or lined) cable into the “+” (positive, red) terminal
on this unit and the speakers, and the other cable into the “-”
(minus, black) terminal.
• Be careful that the core of the speaker cable does not touch
anything or come into contact with the metal areas of this unit.
This may damage this unit or the speakers. If the speaker cables
short circuit, “CHECK SP WIRES!” will appear on the front panel
display when this unit is switched on.
• This unit is con gured for 8Ω speakers at the factory setting.
When connecting 6Ω speakers, con gure the speaker impedance
setting of this unit to 6Ω. When this unit is con gured for 6Ω
speakers, 4Ω speakers can also be used as the front speakers.
For more information on setting the speaker impedance, refer to
“Changing speaker impedance” in the Owner’s Manual.
Connecting the banana plug
Tighten the knob, and then insert the banana plug
into the end of the terminal.
Banana plug
FR
O
N
T
+
SURROUND SURROUND BACK/
SPEAKERS
C
AV 1
HDMI OUT
AV 2 AV 3 AV 4
HDMI
AV 5
SINGLE
BI-AMP
12
AV 3
AV 4
C
AL
OPTICAL
AUDIO 1
(2 TV)
(3 CD)
AUDIO 2 AUDIO 3 AUDIO 4
FRONT
SURROUND
SUR. BACK
SUBWOOFER
CENTER
MULTI CH INPUT
COMPONENT VIDEO
COAXIAL
MONITOR OUT/ZONE OUT
ZONE OUT PRE OUT
ZONE 2
AV OUT
YP
B
P
R
YP
B
P
R
YP
B
P
R
C
D
SURROUND
SUR. BACK
MON.OUT/ZONE OUT
ARC ARC
SELECTABLE
FRONT
(1 BD/DVD)
AV 1
AV 2
B
A
Ԝԝ
(SINGLE)
IN
RE
M
S
U
R
R
O
U
N
D
S
U
R
R
O
U
N
D
B
A
C
K
/
KK
S
P
E
A
K
E
R
S
C
A
V
A
A
1
A
V
A
A
2
A
V
A
A
3
A
V
A
A
4
H
D
M
I
A
V
A
A
5
S
I
N
G
L
E
B
I
-
A
M
P
A
V
A
A
3
A
V
A
A
4
C
A
L
O
P
T
I
C
A
L
A
U
D
I
O
1
(
2
T
V
)
(
3
C
D
)
A
U
D
I
O
2
A
U
D
I
O
3
A
U
D
I
O
4
F
R
O
N
T
S
U
R
R
O
U
N
D
S
U
R
.
B
A
C
K
S
U
B
W
O
O
F
E
R
C
E
N
T
E
R
M
U
L
T
L
L
I
C
H
I
N
P
U
T
C
O
M
P
O
N
E
N
T
V
I
D
E
O
C
O
A
X
I
A
L
Z
O
N
E
O
U
T
P
R
E
O
U
T
Z
O
N
E
2
A
V
A
A
O
U
T
Y
P
B
P
R
Y
P
B
P
R
C
D
S
U
R
R
O
U
N
D
S
U
R
.
B
A
C
K
F
R
O
N
T
(
1
B
D
/
D
V
D
)
A
V
A
A
1
A
V
A
A
2
B
A
Ԝ
ԝ
(
S
I
N
G
L
E
)
I
N
R
E
M
S VIDEO
COMPONENT
VIDEO
HDMI
HDMI
HDMI
Y
P
R
P
R
Y
P
B
P
B
VIDEO
V
V
S
S
* For details on selecting the active HDMI OUT jack, refer to “Selecting the active HDMI OUT jack” in the Owner’s Manual.
A When the HDMI input
is available.*
B When the component
video input is available.
C
When the S-video input is
available.
D
When only the video input
is available.
- 4 -
2
2
Connect a TV
Listening to TV audio
To play back TV audio on this unit, connect the TV audio output to this unit.
Connect the following input jacks, matching the audio output jacks on your TV.
When viewing your TV, select the appropriate input source on this unit.
HDMI OUT
12
O
(1 BD/DVD)
AV 1
KNETWORK
AV 2 AV 3 AV 4
COAXIAL COAXIAL
OPTICAL OPTICAL
OPTICAL
AUDI O 1
(2 TV)
(3 CD)
AUDIO 2 AUDIO 3 AUDIO 4
COAXIAL
AV O UT
Y
MON.OUT/ZONE OUT
ARC ARC
SELECTABLE
AV 1
AV 2
B
A
ԘԙԚԛ Ԝԝ
ANTENNA
75
GND
AMFM
(4 RADIO)
O
(
1
B
D
/
D
V
D
)
A
V
A
A
1
K
N
E
T
W
O
R
K
A
V
A
A
2
A
V
A
A
3
A
V
A
A
4
C
O
A
X
I
A
L
C
O
A
X
I
A
L
O
P
T
I
C
A
L
O
P
T
I
C
A
L
A
V
A
A
O
U
T
Y
M
O
N
.
O
U
T
/
T
T
Z
/
/
O
N
E
O
U
T
A
V
A
A
1
A
V
A
A
2
B
A
Ԙ
ԙ
Ԛ
ԛ
A
N
T
E
N
N
A
7
5
G
N
D
A
M
F
M
(
4
R
A
D
I
O
)
OPTICAL
O
O
Audio
output
Audio output from TV Input jack on this unit
Optical digital output
AUDIO1
Coaxial digital output
AUDIO2
Analog output
AUDIO1
,
AUDIO2
, AUDIO3, or AUDIO4
HDMI Audio Return Channel
(Described in the right column)
HDMI OUT1 or HDMI OUT2
✽ Connecting to AUDIO1 allows you to playback TV audio just by pressing
the SCENE2 key.
When using a TV that supports the Audio Return Channel
function and HDMI Control function
When using an HDMI compatible TV that supports
Audio Return Channel functions and / or HDMI Control functions
(e.g., Panasonic VIERA Link), you can enjoy the TV sound on this
unit.
The audio / video output from the unit to the TV and audio output
from the TV to the unit are possible using a single HDMI cable.
The input source is switched automatically to match operations
carried out on the TV, and that makes TV sound control easier to
use.
For the connections and settings, refer to “Using the HDMI Control
function” in the Owner’s Manual.
If your TV has multiple inputs, connect with the following priority (A to D).
When connecting to an HDMI compatible TV
Video signal such as component video, S-video and video received by
this unit is converted to HDMI and output to the TV. Just select HDMI
input on the TV to view video from any external source connected to
this unit.
HDMI
COMPONENT
VIDEO
HDMI
VIDEO
S
V
I
D
E
O
Input Output
HDMI input
Through
Converted
TV
For more information on video signal conversion, refer to “Connecting a TV monitor” in the Owner’s Manual.
When connecting to a non-HDMI compatible TV
Connect to the TV using the same type of connection that you used to
connect to the playback device.
If the playback device and TV are equipped with different types of
analog video jacks, this unit will convert the video signals to another
type of video signal according to the type of video input jacks used
on the TV.
COMPONENT
VIDEO
HDMI
VIDEO
COMPONENT
VIDEO
HDMI
VIDEO
S
V
I
DE
O
S
V
I
DE
O
Input Output
Component
video input
S-video input
Video input
Through
Converted
TV
Refer “Connecting BD/DVD players and other devices” in Owner’s Manual for details on connection other than above illustration.
• When playing back a device, select the corresponding input source to which the jack is connected.
• If necessary, you can connect components that cannot be connected using the above methods, such as devices that output video from
component video output jacks and audio from analog output jacks. Refer to “Connecting external components” in the Owner’s Manual for details.
• At the default settings, input sources and sound programs are preset on the SCENE keys. When a playback device is connected to AV1,
pressing the SCENE1 key selects the AV1 input. When a playback device is connected to AUDIO2, pressing the SCENE3 selects the AUDIO2
input. The input source and sound program preset on the SCENE key can be changed.
Default scene settings
SCENE Input Audio Select HDMI Output
Sound
Program
Pure Direct
Mode
Tone Control Adaptive DRC Enhancer
1 (BD/DVD) AV1 Auto OUT1+2 Drama Auto
Bass:0.0dB
Trebele:0.0dB
On Off
2 (TV) AUDIO1 Auto OUT1+2 STRAIGHT Auto
Bass:0.0dB
Trebele:0.0dB
On On
3 (CD) AUDIO2 Auto OUT1+2 STRAIGHT Auto
Bass:0.0dB
Trebele:0.0dB
Off Off
4 (RADIO) TUNER --- OUT1+2 STRAIGHT Auto
Bass:0.0dB
Trebele:0.0dB
Off On
The several settings other than ones in the above table can be assigned to the SCENE keys. For more information on the SCENE function, refer to “Changing input
settings with a single key (SCENE function)” in the Owner’s Manual.
AUDIO
VIDEO
COMPONENT
VIDEO
COAXIAL
OPTICAL
COMPONENT
VIDEO
HDMI
ANTENNA
75
GND
AMFM
(4 RADIO)
SURROUND
AV 1
HDMI OUT
AV 2 AV 3
12
PHONO
GND
(1 BD/DVD)
AV 1
DOCK NETWORK
AV 2 AV 3 AV 4
AV 3
AV 4
COAXIAL COAXIAL
OPTICAL OPTICAL
OPTICAL
AUDI O 1
(2 TV)
(3 CD)
AUDIO 2 AUDIO 3 AUDIO 4
FRONT
SURROUND
SUR. BACK
SUBWOOFER
CENTER
MULTI CH INPUT
COMPONENT VIDEO
COAXIAL
ZON
E
ZONE 2
AV OUT
YP
B
P
R
YP
B
P
R
C
D
MON.OUT/ZONE OUT
ARC ARC
SELECTABLE
(1 BD/DVD)
AV 1
AV 2
B
A
ԘԙԚԛ Ԝԝ
A
N
T
E
N
N
A
7
5
G
N
D
A
M
F
M
(
4
R
A
D
I
O
)
S
U
R
R
O
U
N
D
H
D
M
I
O
U
T
A
V
A
A
2
A
V
A
A
3
1
2
P
H
O
N
O
G
N
D
(
1
B
D
/
D
V
D
)
A
V
A
A
1
D
O
C
K
N
E
T
W
O
R
K
A
V
A
A
2
A
V
A
A
3
C
O
A
X
I
A
L
O
P
T
I
C
A
L
O
P
T
I
C
A
L
A
U
D
I
O
1
(
2
T
V
)
(
3
C
D
)
A
U
D
I
O
2
A
U
D
I
O
3
A
U
D
I
O
4
F
R
O
N
T
S
U
R
R
O
U
N
D
S
U
R
.
B
A
C
K
S
U
B
W
O
O
F
E
R
C
E
N
T
E
R
M
U
L
T
L
L
I
C
H
I
N
P
U
T
C
O
M
P
O
N
E
N
T
V
I
D
E
O
C
O
A
X
I
A
L
Z
O
N
E
Z
O
N
E
2
A
V
A
A
O
U
T
Y
P
B
P
R
A
V
A
A
4
D
M
O
N
.
O
U
T
/
TT
Z
/
/
O
N
E
O
U
T
A
R
C
A
R
C
S
E
L
E
C
T
A
T
T
B
L
E
A
V
A
A
1
A
Ԙ
ԛ
Ԝ
ԝ
O
R
R
C
V
V
L
L
O
C
O
P
R
Y
P
R
YP
B
HDMI
HDMI
P
B
P
B
P
B
P
R
Y
P
R
Y
A
When the HDMI output is
available.
B
When the component video
output is available (with optical
digital audio output).
C
When the component video
output is available (with coaxial
digital audio output).
D
When only the video input
is available (with the analog
audio output).
- 5 -
3
3
Connect playback devices such as BD/DVD players and recorders
If your playback device has multiple audio/video outputs, connect with the following priority
(A to D) to enjoy a higher quality sounds and images.
Power cable
To the power outlet
AC IN
A
V 7
FRONT
RS-232C
2
1
TRIGGER
OUT
+12V 0.1A MAX.
ZONE2/
F.PRESENCE
EXTRA SP
A
V
A
A
7
F
R
O
N
T
R
S
-
2
3
2
C
2
1
T
R
I
G
G
E
R
O
U
T
+
1
2
V
0
.
1
A
M
A
X
.
Z
O
N
E
2
/
F
.
F
F
P
R
E
S
E
N
C
E
E
X
T
R
A
S
P
Plug the supplied power cable into the AC inlet
after all other connections are complete, then
plug the power cable into an AC wall outlet.
4
4
Connect the power cable
Continues to
the next page
- 6 -
When all connections are complete, adjust the con guration, sizes, and volume
balance of the speakers to provide an optimal sound  eld. This unit is equipped with a
Yamaha Parametric Room Acoustic Optimizer (YPAO) function that adjusts the speaker
balance automatically with a simple procedure.
Be aware of the following when using YPAO.
• The amount of time for measurement varies from about two to ten minutes according to settings.
• The test tone is output at high volume. Refrain from using this function at night when it may be a nuisance to others.
• Take care that the test tone does not frighten small children.
YPAO operations can be viewed on the front panel display or TV screen. TV display is used here to explain operation.
1
Check the following before using YPAO.
This unit
• The headphones are removed.
TV
• This unit is connected to the TV correctly.
• The power is turned on.
• The video input to which the video output
from this unit has been selected.
Subwoofer
• The power is turned on.
• Volume is set to approximately half, and the
cross-over frequency (if present) is set to
maximum.
2
Place the supplied YPAO microphone at ear height in your listening
position.
• When positioning the microphone, we recommend that you use equipment that allows you
to adjust the height (such as a tripod) as a microphone stand. When using a tripod, use the
tripod screws to  x the microphone in place.
• Measuring, for multiple listening positions, is also available. For more information, refer to
“Setting up the speaker parameters automatically (YPAO)” in the Owner’s Manual.
3
Press RECEIVER A on the remote control to switch this unit on.
4
Connect the YPAO microphone to the YPAO MIC jack on the front panel.
YPAO microphone
“Mic On View ON SCREEN”
appears on the front panel
display, and the display at right
appears on the TV screen.
YPAO can be performed
viewing only front panel display
on this unit without the TV
screen.
Opening and closing the front panel door
Before step 4, gently press the bottom of the door to open it.
Keep the door closed when not using controls or jacks behind the
front panel door.
This completes preparation. To achieve more accurate results, take note of the
following when measuring acoustics.
• Keep the room as quiet as possible for a few minutes.
• Wait in a corner of the room, or leave it entirely, while acoustics are measured to
avoid creating an obstruction between the speakers and the YPAO microphone.
5
5
Set up the speaker parameters automatically (YPAO)
YPAO microphone
VOLUME
MIN MAX
CROSSOVER/
HIGH CUT
MIN MAX
Subwoofer examples
- 7 -
SCENE
VOLUME
ENHANCER
SUR. DECODE
STRAIGHTSLEEP PURE DIRECT
AV
AUDIO
1234
75
FM
INFO
MEMORY
AM
PRESET
PA RT Y
MOVIE MUSIC
MUTE
ENTER
7856
90
10
1234
REC
ENT
TV
TV VOL TV CH
TOP
MENU
POP-UP
MENU
SOURCE
MAIN
ZONE 2
RECEIVER
CODE SET
INPUT
MUTE
DOCK
HDMI OUT
MULTI
1234
6
V-AUX
USB
NET
TUNER
PHONO
TUNING
ON SCREEN OPTION
1
2
3
4
BD/DVD
TV
CD
RADIO
1
2
3
4
BD/DVD
TV
CD
RADIO
RETURN
DISPLAY
S
C
E
N
E
V
O
L
U
M
E
E
N
H
A
N
C
E
R
S
U
R
.
D
E
C
O
D
E
S
T
R
A
I
G
H
T
P
U
R
E
D
I
R
E
C
T
M
O
V
I
E
M
U
S
I
C
M
U
T
E
7
8
5
6
9
0
1
0
1
2
3
4
R
E
C
E
N
T
T
V
T
V
V
O
L
T
V
C
H
T
O
P
M
E
N
U
P
O
P
-
U
P
M
E
N
U
S
O
U
R
C
E
M
A
I
N
Z
O
N
E
2
R
E
C
E
I
V
E
R
C
O
D
E
S
E
T
S
L
E
E
P
P
A
P
P
R
T
Y
F
M
I
N
F
O
M
E
M
O
R
Y
A
M
P
R
E
S
E
T
A
U
D
I
O
A
V
A
A
1
2
3
4
7
5
I
N
P
U
T
M
U
T
E
D
O
C
K
H
D
M
I
O
U
T
M
U
L
T
L
L
I
1
2
3
4
6
V
-
V
V
A
U
X
U
S
B
N
E
T
T
U
N
E
R
P
H
O
N
O
T
U
N
I
N
G
O
N
S
C
R
E
E
N
O
P
T
I
O
N
1
1
2
2
3
3
4
4
B
B
D
D
/
/
D
D
V
V
D
D
T
T
V
V
C
C
D
D
R
R
A
A
D
D
I
I
O
O
R
E
T
U
R
N
D
I
S
P
L
A
Y
A
A
RECEIVER A
ENTER, Cursor
5
Use the cursor B/C to select the “Measure” and press ENTER to start
measurement.
When “Multi Position” is set to “Yes” (default), the
measurement of multiple positions will follow. Refer to
“Setting up the speaker parameters automatically (YPAO)”
for details on “Multi Position” in the Owner’s Manual.
The display at right appears if measurement  nishes
without any problems.
Result
Displays the results of automatic acoustics measurement.
For details, refer to “Reviewing the automatic setup
parameters” in the Owner’s Manual.
Save/Exit
Applies the result to the speaker setup and  nishes the
automatic measurement.
Note
If a problem occurs, an error message or report is displayed either during or after acoustic
measurement. Refer to “When an error message is displayed during measurement,” or “When a
warning message is displayed after measurement” in the Owner’s Manual to resolve the problem
and measure acoustics with YPAO again.
6
Use the cursor B/C to select “Save/Exit” and press ENTER.
7
Use the cursor D/E to select “SAVE” and press ENTER.
When the display at right appears, the YPAO setup is
complete.
8
Press ENTER.
YPAO is terminated. Disconnect the YPAO microphone.
All the preparation is completed.
Enjoy the various functions provided by this unit. For details on the operations, refer to the Owner’s
Manual.
SCENE
VOLUME
ENHANCER
SUR. DECODE
STRAIGHTSLEEP PURE DIRECT
AV
AUDIO
1234
75
FM
INFO
MEMORY
AM
PRESET
PART Y
MOVIE MUSIC
MUTE
ENTER
7856
90
10
1234
REC
ENT
TV
TV VOL TV CH
TOP
MENU
POP-UP
MENU
SOURCE
MAIN
ZONE 2
RECEIVER
CODE SET
INPUT
MUTE
DOCK
HDMI OUT
MULTI
1234
6
V-AUX
USB
NET
TUNER
PHONO
TUNING
ON SCREEN OPTION
1
2
3
4
BD/DVD
TV
CD
RADIO
1
2
3
4
BD/DVD
TV
CD
RADIO
RETURN
DISPLAY
- 8 -
A
Switches this unit between on and standby mode
This unit switches between on and standby mode every time you press this key.
B
Selects an input source to listen to
The name of the selected input source appears on the front panel display.
VOLUME
A.Sel: AUTO
AV1
C
Selects a scene
You can switch the settings such as input sources and sound  eld programs with a single key.
Refer to “Default scene settings” on page 5 for details on the settings assigned to this unit.
D
Adjusts the volume level
The current volume level is displayed on the front panel display.
VOLUME
Main Volume
E
Mutes the sound
The MUTE indicator blinks while the sound is muted.
F
Selects sound  eld programs and sound decoders
Front
panel
Remote
control
Description
MOVIE
Selects sound  eld programs optimized for appreciating music.
MUSIC
Selects sound  eld programs optimized for viewing movies,
dramas, and sports.
SUR. DECODE
Selects surround decoders such as Dolby Pro Logic II.
STRAIGHT
Switches to Straight decoding mode for stereo/multi-channel
playback without using a sound  eld program.
PURE DIRECT
PURE DIRECT
Switches to Pure Direct Mode for faithful reproduction of audio.
G
Turns on Compressed Music Enhancer
Press ENHANCER to turn on Compressed Music Enhancer for playback of the compressed music
source with better sound quality.
VOLU ME
ENHANCER
Enhancer On
To disable Compressed Music Enhancer, press ENHANCER again.
Basic operations
© 2010 Yamaha Corporation
YC711C0/QREN2
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Yamaha HTR-8063 Manual do proprietário

HTR-8063
Yamaha
Marca
Yamaha
Modelo
HTR-8063
Categoria
Receptores AV
Tipo
Manual do proprietário
Este manual também é adequado para
Baixar PDF
relatório

em outras línguas

Artigos relacionados