Ingersoll-Rand RX-264H Operation & Maintenance Manual

Tipo
Operation & Maintenance Manual

Este manual também é adequado para

Operation & Maintenance Manual
UPRIGHT RAMMERS
Manuel de l'Opérateur et d'Entretien
PILONNEUSES VIBRANTES
Betriebs- und Wartungsanweisungen
STAMPFER
Manuale d’uso e manutenzione
PESTELLI
Manual de Utilización y Mantenimiento
PISONES
Bedienings- en Onderhoudshandleiding
TRILSTAMPERS
Manual de Operação e Manutenção
SALTÃO
Betjenings- & vedligeholdelsesvejledning
OPRETSTÅENDE STAMPERE
Käyttö- ja Huolto-ohjekirja
RYJUNTILLE
Instruksjonsbok
STAMPERE
Drift- och underhållshandbok
STAMPERE
EN
FR
DE
IT
ES
NL
PT
DA
FI
NO
SV
RX-264H
RX-344H
RX-264H Serial No. JF3500
RX-344H LF3993
© Ingersoll Rand Europe 2006
© Ingersoll Rand Construction Technologies80025927 (10-06)
Revised (10-12)
Doosan purchased Bobcat Company from Ingersoll-Rand Company in
2007. Any reference to Ingersoll-Rand Company or use of trademarks,
service marks, logos, or other proprietary identifying marks belonging
to Ingersoll-Rand Company in this manual is historical or nominative
in nature, and is not meant to suggest a current affiliation between
Ingersoll-Rand C
ompany and Doosan
Company or the products of
e
ith
er.
RX-264H/RX-344H Upright Rammer
i-EN Operation & Maintenance Manual
EN
This manual should be used with all related supplemental books, engine and transmission manuals, and part books. Related
Service Bulletins should be reviewed to provide information regarding some of the recent changes. If any questions arise
concerning this publication or others, contact your local distributor for the latest available information. Contents of this
manual are based on information in effect at the time of publication and are subject to change without notice.
CONTENTS
INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ii
DECLARATION OF CONFORMITY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii
SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iv
SYMBOLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vi
APPLICATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
OPERATING INSTRUCTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
REFERENCE INFORMATION
Write the correct information for YOUR Ingersoll Rand Upright Rammer in the spaces below. Always use these numbers when referring
to your Ingersoll Rand Upright Rammer.
Upright Rammer Serial Number: ______________________________________________________________________________
Engine Serial Number: ______________________________________________________________________________________
NOTES: _________________________________________________________________________________________________
_________________________________________________________________________________________________________
_________________________________________________________________________________________________________
_________________________________________________________________________________________________________
YOUR INGERSOLL RAND
®
DEALER: _________________________________________________________________________
ADDRESS: _______________________________________________________________________________________________
_________________________________________________________________________________________________________
PHONE: _________________________________________________________________________________________________
Ingersoll Rand Company Ltd
Construction Technologies Division
501 Sanford Avenue
Mocksville, North Carolina
United States of America
Ingersoll Rand Company Ltd
Construction Technologies Division
Swan Lane
Hindley Green
Wigan WN2 4EZ
United Kingdom
RX-264H/RX-344H Upright Rammer
ii-EN Operation & Maintenance Manual
INTRODUCTION
EXCELLENT CHOICE! The Ingersoll Rand Upright Rammer you have chosen will give you many hours of maintenance free operation
resulting in a faster return of your investment.
Safe operation depends on reliable equipment and the use of proper operating procedures. Performing the checks and services
described in this manual will help keep your machine in good condition. These recommended operation procedures will help you to
avoid unsafe practices.
Safety notes have been included throughout this manual to help you avoid injury and prevent damage to the equipment. These notes
are not intended to cover all eventualities; it is impossible to anticipate and evaluate all possible methods of operation. Therefore,
you are the only person who can guarantee safe operation and maintenance.
It is important that any procedure not specifically recommended in this manual be thoroughly evaluated from the standpoint of safety
before it is implemented.
Continuing improvement and advancement of product design may cause changes to your machine which may not be included in this
publication. Each publication is reviewed and revised, as required, to update and include these changes in later editions. Ingersoll
Rand reserves the right to modify or make changes within a specific model group without notice and without incurring any liability to
retrofit units previously shipped from the factory. Contact your Ingersoll Rand Distributor for non-routine maintenance information that
is not covered in this publication.
INGERSOLL RAND COMPANY IS ISO 9001 CERTIFIED
ISO 9001 is a set of international standards that control the processes and procedures which we use to design, develop, manufacture,
distribute, and service Ingersoll Rand products.
Lloyd's Register Quality Assurance (LRQA) is the Certified Registrar Ingersoll Rand chosen to assess the Company’s compliance with
the ISO 9001 set of standards. The LRQA registration certifies that the European manufacturing plants and offices of Ingersoll Rand
(Hindley Green, United Kingdom; Les Clayes, France; Coslada, Spain; Zoeterwoude, Netherlands; Mulheim, Germany) are in
compliance with ISO 9001. Only certified assessors, like LRQA, can grant registrations.
ISO 9001 means that as a company we say what we do and do what we say. In other words, we have established procedures and
policies, and we provide evidence that the procedures and policies are followed.
RX-264H/RX-344H Upright Rammer
iii-EN Operation & Maintenance Manual
EN
DECLARATION OF CONFORMITY
Machine models represented in this manual may be used in various locations world-wide. Machines sold and shipped into
European common market countries requires that the machine display the EC Mark and conform to various directives. In such
cases, the design specification of this machine has been certified as complying with EC directives. Any modification to any part is
absolutely prohibited and would result in the CE certification and marking being rendered invalid. A declaration of that conformity
follows:
DECLARATION OF CONFORMITY WITH EC DIRECTIVES
98/37/EC, 2000/14/EC amended by 2005/88/EC, 2002/44/EC
We,
Ingersoll Rand Company Ltd
Portable Power Division
Swan Lane
Hindley Green
Wigan WN2 4EZ
United Kingdom
Declare that under our sole responsibility for manufacture and supply, the product(s)
Uprigth Rammers Type RX-264H and RX-344H
To which this declaration relates, is (are) in conformity with the provisions of the above directives using the following
principal standards EN12100, EN500-1 and EN500-4.
Issued at Hindley Green in January 2006
Peter Edgeller,
Technical Manager
CONFORMITY TO NOISE DIRECTIVE
2000/14/EC
Ingersoll Rand Company Limited declare that the following Upright Rammers have beenmanufactured in conformity
with the directive as shown.
Directive Machine Model Weigth Range
Mean Measured
Value
Guaranteed Level Notified Body
2000/14/EC
Annex VI Part 1
amended by
2005/88/EC
RX-264H 55 kg
102.99 L
WA
104 L
WA
SNCH,
Luxembourg
N°0499
RX-344H 72 kg
103.41 L
WA
104 L
WA
Issued at ............................ Hindley Green
1
st
Declaration: January 2006
Peter Edgeller,
Technical Manager
RX-264H/RX-344H Upright Rammer
iv-EN Operation & Maintenance Manual
SAFETY INSTRUCTIONS
Overview
Before you operate, maintain, or in any other way, use this
machine, read and study this manual. Know how to safety use
the compactor’s controls and what you must do for safe
maintenance.
BEFORE YOU OPERATE, MAINTAIN OR IN ANY OTHER
WAY, OPERATE THIS MACHINE:
READ and STUDY this manual.
KNOW how to safely use the unit’s controls and what you
must do for safe maintenance.
The machine has been built in accordance with state-of-the-art
standards and the recognized safety rules. Nevertheless, its
use may constitute a risk to life and limb of the user or of third
parties, or cause damage to the machine and to other material
property.
ALWAYS wear or use the proper safety items required for your
personal protection.
For reasons of security, long hair must be tied back or otherwise
secured, garments must be close-fitting and no jewellery – such
as rings – may be worn. Injury may result from being caught up
in the machinery or from rings catching on moving parts.
If you have ANY QUESTIONS about the safe use or
maintenance of this unit, ASK YOUR SUPERVISOR OR
CONTACT ANY Ingersoll Rand DISTRIBUTOR. NEVER
GUESS – ALWAYS CHECK.
Never make any modifications, additions or conversions which
might affect safety without the supplier’s approval. This also
applies to the installation and adjustment of safety devices and
valves as well as to welding work on load-bearing elements.
Observe all fire-warning and fire-fighting procedures.
Pre-start inspection
INSPECT your machine. Have any malfunctioning, broken or
missing parts corrected or replaced before use.
Check the machine at least once per working shift for obvious
damage and defects. Report any changes (incl. changes in the
machine’s working behaviour) to the competent organisation/
person immediately. If necessary, stop the machine immediately
and lock it.
Take the necessary precautions to ensure that the machine is
used only when in a safe and reliable state.
Operate the machine only if all protective and safety oriented
devices, such as removable safety devices, emergency shut-off
equipment, sound-proofing elements and exhausts, are in place
and fully functional.
The electrical equipment of machines is to be inspected and
checked at regular intervals. Defects such as loose connections
or scorched cables must be rectified immediately.
VERIFY that all the instruction and safety labels are in place
and readable. These are as important as any other equipment
on the compactor.
NEVER fill the fuel tank, with the engine running, while near an
open flame, or when smoking. ALWAYS wipe up any spilled fuel
immediately.
CHECK for WARNING tags placed on the machine. DO NOT
operate the equipment until repairs have been made and the
WARNING tags are removed by authorized personnel.
KNOW the location of the Emergency Shut-Down Control if the
machine is so equipped.
Operating
In the event of safety-relevant modifications or changes in the
behaviour of the machine during operation, stop the machine
immediately and report the malfunction to the competent
authority/person.
Always wear the prescribed ear protectors.
Always make sure that no person or obstruction is in your line of
travel. Watch your step to avoid tripping.
USE extreme caution and be observant when working in close
quarters or congested areas.
Before beginning work, familiarize yourself with the
surroundings and circumstances of the site, such as obstacles
in the working and travelling area, the soil bearing capacity and
any barriers separating the construction site from public roads.
When travelling on public roads, ways and places always
observe the valid traffic regulations and, if necessary, make
sure beforehand that the machine is in a condition compatible
with these regulations
Always keep at a distance from the edges of building pits and
slopes.
DO NOT run the engine in a closed building for an extended
length of time. EXHAUST FUMES CAN KILL.
DO NOT operate the compactor on non-compactable material,
such as concrete or hardened asphalt.
RX-264H/RX-344H Upright Rammer
v-EN Operation & Maintenance Manual
EN
Maintenance
Observe the adjusting, maintenance and inspection activities
and intervals set out in the operating instructions, including
information on the replacement of parts and equipment. These
activities may be executed by skilled personnel only.
Ensure that the maintenance area is adequately secured.
After cleaning, examine all fuel, lubricant, and hydraulic fluid
lines for leaks, loose connections, chafe marks and damage.
Any defects found must be rectified without delay.
Always tighten any screwed connections that have been
loosened during maintenance and repair.
Any safety devices removed for set-up, maintenance or repair
purposes must be refitted and checked immediately upon
completion of the maintenance and repair work.
Ensure that all consumables and replaced parts are disposed of
safely and with minimum environmental impact.
AVOID, whenever possible, servicing, cleaning or examining the
unit with the engine running.
NEVER fill the fuel tank, with the engine running, while near an
open flame, or when smoking. ALWAYS wipe up any spilled fuel
immediately.
ALWAYS disconnect the spark plug before performing any work
on the unit.
DO NOT alter the engine governor settings from that indicated
in the engine manual.
ALWAYS replace damaged or lost decals. Refer to the Parts
Manual for the proper location and part number of all decals.
Carry out welding, flame-cutting and grinding work on the
machine only if this has been expressly authorized, as there
may be a risk of explosion and fire.
Before carrying out welding, flame-cutting and grinding
operations, clean the machine and its surroundings from dust
and other inflammable substances and make sure that the
premises are adequately ventilated (risk of explosion).
RX-264H/RX-344H Upright Rammer
vi-EN Operation & Maintenance Manual
INTERNATIONAL MACHINE SYMBOLS
SYMBOLS
The following explains the meaning of international symbols that may appear on your machine.
ENGINE OIL PRESSURE
WATER TEMPERATURE
ON/OFF
LIGHTS
WATER
BATTERY
AMMETER OR VOLTMETER
AIR PRESSURE
LOW AIR PRESSURE
ENGINE RPM
BRAKE ON
BRAKE OFF
HORN
CAUTION
DIESEL FUEL
ON
OFF
SLOW
FAST
TRANSMISSION
GREASE
OIL LUBRICATION POINT
HYDRAULIC OIL
HOURS
NEUTRAL
LOW ENINGE RPM
PARKING BRAKE
DRUM VIBRATION
HIGH AMPLITUDE
LOW AMPLITUDE
FREQUENCY
CAUTION – PRESSURE
RX-264H/RX-344H Upright Rammer
1-EN Operation & Maintenance Manual
EN
APPLICATION
Your upright rammer RX delivers a high impact force with a high
amplitude on a relatively small foot surface. It makes it an
excellent choice for compacting cohesive and semi-cohesive
soils, which require high energy to rearrange the particles.
Thanks to their design and maneuverability, the RX-264H and
RX-344H are ideal for compacting backfilling in narrow
trenches.
Easy maintenance: The rugged 4 stroke Honda engines will
deliver hours of trouble-free operation.
The choice between RX-264H and RX-344H depends upon the
level of productivity that you require: with a wider foot, the
RX-344H will achieve more sqm per hour. On the other hand,
the RX-264H is lighter and therefore easier to handle around
the jobsite obstacles.
RX-264H/RX-344H Upright Rammer
2-EN Operation & Maintenance Manual
RX-264H/RX-344H Upright Rammer
3-EN Operation & Maintenance Manual
EN
SPECIFICATIONS
Performance
RX-264H RX-344H
OPERATING WEIGHT 58 kg 72 kg
TRAVEL SPEED 12-14 mpm 12-14 mpm
IMPACT FORCE 10 kN 12.7 kN
BLOWS PER MINUTE 600-650 vpm 600-650 vpm
RECOMMENDED DEPTH 460 mm 610 mm
AREA CAPACITY PER HOUR 195 sq. m 235 sq. m
NOISE LEVEL 104 Lwa 104 Lwa
VIBRATION LEVEL --- 8.0 m/s²
Engine
RX-264H RX-344H
ENGINE (MAKE & MODEL) Honda GX100 Aircooled gasoline Honda GX120 Aircooled gasoline
ENGINE HORSEPOWER 2.2 kw/4000 rpm 2.9 kw/3700 rpm
FUEL Automobile gasoline Automobile gasoline
STARTING SYSTEM Recoil starter Recoil starter
DRIVE Direct drive Direct drive
Dimensions
RX-264H RX-344H
OVERALL LENGTH 675 mm 675 mm
OVERALL WIDTH 385 mm 466 mm
OVERALL HEIGHT 1100 mm 1115 mm
SHOE SIZE 230 x 330 mm 270 x 330 mm
Capacity
RX-264H RX-344H
FUEL TANK CAPACITY 2.5 liters 2.5 liters
Fluid capacities
RX-264H RX-344H
ENGINE OIL (SAE 10W30) 0.4 liters 0.6 liters
MAIN BODY OIL (SAE 10W30) 0.6 liters 0.9 liters
RX-264H/RX-344H Upright Rammer
4-EN Operation & Maintenance Manual
RX-264H/RX-344H Upright Rammer
5-EN Operation & Maintenance Manual
EN
OPERATING INSTRUCTIONS
SAFETY CHECKS – PRE-STARTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
INSPECTION PRIOR TO OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
OPERATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
OPERATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
LONG TERM STORAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
RX-264H/RX-344H Upright Rammer
6-EN Operation & Maintenance Manual
SAFETY CHECKS – PRE-STARTING
Before starting each day, in addition to the 10 hour daily routine
maintenance, check or inspect the following items to ensure
trouble free performance.
1. Check fluid lines, hoses, fittings, filler openings, drain plugs,
pressure cap, muffler, safety shrouds and the area
underneath the unit for signs of leakage or damage. Fix any
leaks and correct any damage before operating.
2. Inspect the entire unit for damaged or missing parts and
repair or replace them as needed.
3. Check the fuel level. If necessary, fill the fuel tank with the
proper fuel.
4. Check all fastening hardware to ensure it is adequately
tightened and that none is missing or broken.
5. Do not operate faulty equipment.
6. Be observant of people and obstructions within the work
area.
7. Check engine for fuel.
Please read “INSTRUCTIONS FOR USE” for HONDA engine
GX100 (RX-264H) and for HONDA engine GX120 (RX-344H)
and this instruction manual for correct use and care.
Please check if the unit is correctly maintained in good
operating conditions.
INSPECTION PRIOR TO OPERATION
Check Engine Oil
Before checking or refilling engine oil, be sure the upright
rammer is located on a stable level surface.
Do not thread the gauge into oil filler to check oil level. If the oil
level is below the lower level line on the dipstick, refill with the
proper oil to the upper level (to the neck of oil filler). See
SECTION – MAINTENANCE, “50 HOUR OR WEEKLY
ROUTINE MAINTENANCE”.
Check Engine for Fuel
CAUTION
Do not refuel while smoking near an open flame or other
potential hazards.
Cleaning Air Cleaner
Check Air Cleaner to be sure it is clean and not comtaminated.
If it needs cleaned perform the following steps:
Take out the outer urethane foam and inner element.
Wash the element in kerosene or diesel fuel.
Saturate it in a mixture of 3 parts kerosene or diesel fuel and
1 part engine oil.
Shake off excessive oil and reinstall.
Wash the air cleaner case using kerosene.
After cleaning it up, apply engine oil on the inner part of the
case.
CAUTION
If the air cleaner element is seriously contaminated engine
start up may fail or poor output and malfunctions of the
engine may result.
Check each part for lose or broken Bolts and Nuts
Tighten loose Bolts and Nuts, if any. Check each part for fuel or
oil leak. Replace broken or damaged parts, if any, with new
ones.
Lubrication of Main Body
Check the Main Body oil level with the oil gauge before each
operation. Change oil after the first 50 hours and every
200 hours. See SECTION – MAINTENANCE, “200 HOUR OR
QUARTERLY ROUTINE MAINTENANCE”.
OPERATION
Starting
1. Turn the STOP SWITCH clockwise to the ON position.
RX-264H: [Figure 1]
RX-344H: [Figure 2]
Figure 1 RX-264H Stop Switch
c
ON
OFF
RX-264H/RX-344H Upright Rammer
7-EN Operation & Maintenance Manual
EN
Figure 2 RX-344H Stop Switch
2. Open the FUEL COCK (
c, [Figure 3]) located under the
fuel tank.
RX-344H only: Move the FUEL VALVE LEVER to the “ON”
position [Figure 4].
Figure 3 Fuel Cock
Figure 4 RX-344H Fuel Valve Lever
3. Close the CHOKE LEVER.
RX-264H: [Figure 5]
RX-344H: [Figure 6]
If the engine is cold or the ambient temperature is low, close
the Choke Lever fully. If the engine is warm or the ambient
temperature is high, open the Choke Lever half-way, or keep
it fully open.
Figure 5 RX-264H Choke Lever
Figure 6 RX-344H Choke Lever
4. Position the THROTTLE LEVER [Figure 8] to “LOW” speed
position.
5. Pull the STARTER HANDLE (
c, [Figure 7]) of RECOIL
STARTER slowly until resistance is felt. This is the
“COMPRESSION” point. Return the Handle to its original
position and pull swiftly. After starting the engine, allow the
Starter Handle to return to its original position while still
holding the Handle.
Figure 7
After the engine starts, set the Throttle Lever [Figure 8] at the
low speed position “LOW” and warm it up without load for a few
minutes. Fully open CHOKE LEVER (
c, [Figure 5] [Figure 6])
gradually.
c
STOP SWITCH
ON
CLOSE
CLOSE
OPEN
c
FUEL VALVE
LEVER
ON
CHOKE LEVER
CLOSE
OPEN
CHOKE LEVER
CLOSE
OPEN
c
RX-264H/RX-344H Upright Rammer
8-EN Operation & Maintenance Manual
CAUTION
Avoid fully pulling out the rope. Return the Handle to its
original position.
Running
1. While standing behind the machine, hold it firmly and
shift the THROTTLE LEVER [Figure 8] toHIGH speed
position quickly. The upright rammer starts to jump and
move forward.
Figure 8
2. Hold the rammer guide bar firmly with two hands. Walk
behind the machine at its own speed and keep controlling
the travelling.
3. Changing direction is done by pivoting the machine around
its vertical axis left or right while it jumps.
4. When coming to a dead-end, shift the throttle to low speed
in order to immobilize the rammer. Turn it around and switch
to high speed in order to make it jump again.
5. Circulate the unit all around the area to be compacted.
Depending on the conditions, three to five passes might be
necessary to obtain proper compaction.
CAUTION
Wearing safety shoes and gloves is compulsory.
Respect the maximum depth of fresh soil to be compacted
(SPECIFICATIONS). Otherwise there will remain an
intermediate layer of loose soil.
Do not over-compact the soil: it will only bring
unnecessary wear to the machine.
Stopping
1. Shift the throttle lever (
c, [Figure 9]) to “LOW” speed
position.
2. Allow the engine to run at low speed for 2-3 minutes before
stopping.
3. Turn the STOP SWITCH (
d, [Figure 9] (RX-264H &
RX-344H)) counterclockwise to the “OFF” position.
4. Close the fuel cock (
e, [Figure 9]).
5. RX-344H only
Close the FUEL COCK (
f, [Figure 9]) located under the
fuel tank.
Figure 9
LOW SPEED
HIGH SPEED
THROTTLE LEVER
LOW SPEED
HIGH SPEED
THROTTLE LEVER
c
RX-264H Stop Switch
ON
OFF
d
STOP SWITCH
OFF
d
RX-344H Stop Switch
RX-264H/RX-344H Upright Rammer
9-EN Operation & Maintenance Manual
EN
CAUTION
Do not stop engine suddenly while running at high speed.
TRANSPORTATION
1. A carrying wheel cart is supplied with the rammer for
transportation in a vertical position around the job site.
2. In case the rammer must be laid down horizontally for
transportation, for storage or for service reason, it must rest
on the plastic wheels fixed to the top frame. On the
RX-264H, these wheels are located on the front side; on the
RX-344H, the wheels are located on the right-hand side.
In this position, the rammer can be moved on small
distances (in/out of a truck for instance) using the handle on
the shoe.
3. The highest point of the top frame can be used as a lifting
eye for loading/unloading or displacement on the job-site.
LONG TERM STORAGE
WARNING
Discharge fuel (No Smoking !)
1. Remove the strainer cup of the fuel cock, place the strainer
over a container and open the fuel cock to discharge fuel
from the fuel tank. Remove the carburetor float chamber bolt
from the bottom and discharge fuel from the carburetor.
2. Close the fuel cock.
3. Change the engine oil with fresh oil.
4. Remove the spark plug, pour about 5 ml of the engine oil
into the cylinder, slowly pull the starter handle of the recoil
starter 2 or 3 times, and re-install the spark plug.
5. Slowly pull the recoil starter handle until resistance is felt
and leave it in that position.
6. Clean the unit and engine.
7. Store the unit and engine indoors in a well-ventilated, low
humidity area. Use the cover to avoid dirt, etc. if storage will
be for a long time.
CAUTION
Always stop the engine and allow to cool down before
covering the unit.
CLOSE
CLOSE
OPEN
e
FUEL VALVE
LEVER
OFF
f
RX-344H only
RX-264H/RX-344H Upright Rammer
10-EN Operation & Maintenance Manual
RX-264H/RX-344H Upright Rammer
11-EN Operation & Maintenance Manual
EN
MAINTENANCE
GENERAL MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
INITIAL BREAK-IN MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
10 HOUR OR DAILY ROUTINE MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
50 HOUR OR WEEKLY ROUTINE MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
200 HOUR OR QUARTERLY ROUTINE MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
TROUBLESHOOTING THE ENGINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
TROUBLESHOOTING THE MACHINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
RX-264H/RX-344H Upright Rammer
12-EN Operation & Maintenance Manual
GENERAL MAINTENANCE
1. Engine RPM is adjusted to:
RX-264H: 4,000 – 4,100 min
-1
or rpm.
RX-344H: 3,600 – 3,700 min
-1
or rpm.
(With load)
2. Check Bolts and Nuts for looseness. Tighten it if necessary.
3. Check for fuel and oil leak.
4. Keep the RUBBER BUFFER operating handle away from oil
and fuel.
5. Please refer to “INSTRUCTION FOR USE” for HONDA
engine GX100 (RX-264H) or for HONDA engine GX120
(RX-344H) regarding the how-to maintenance for engine.
Air Cleaner
Keep the Air Cleaner Element clean. Take out the outer
urethane foam and inner element. Wash the element in
kerosene or diesel fuel. Saturate it in a mixture of 3 parts
kerosene or diesel fuel and 1 part engine oil. Shake off
excessive oil and reinstall. Wash the air cleaner case using
kerosene. After cleaning it up, apply the engine oil on the inner
part of the case.
CAUTION
If the air cleaner element is seriously contaminated,
start-up failure, poor output and malfunctions of the engine
may result.
Lubrication
Lubrication is an essential part of preventive maintenance,
affecting to a great extent the useful life of the unit. Different
lubricants are needed and some components in the unit require
more frequent lubrication than others.
Specific recommendations of brand and grade of lubricants are
not made here due to regional availability, operating conditions,
and the continual development of improved products. Where
questions arise, refer to the requirements and specifications in
the manufacturer's manual.
All oil levels are to be checked with the machine parked on a
level surface, and while the oil is cold, unless otherwise
specified.
Check Fuel
1. Stop the engine and open the fuel tank cap.
2. Use automobile unleaded gasoline only.
3. Close the fuel cock before filling the fuel tank.
4. When filling the fuel tank, always use the fuel filter.
5. Wipe off any spilled fuel before starting the engine.
WARNING
Fuel is flammable. It may cause injury and property
damage.
Shut down the engine, extinguish all open flames and do
not smoke while filling the fuel tank.
Always wipe up any spilled fuel.
INITIAL BREAK-IN MAINTENANCE
Engine Oil
Drain the engine oil after the first 20 hours of operation. Fill with
the correct amount of the recommended oil. Check the oil level
with the oil filler cap/dip stick. See “50 HOUR OR WEEKLY
ROUTINE MAINTENANCE”.
WARNING
Hot oil and/or components can burn.
Oil must be at normal operating temperature when
draining.
Avoid contact with hot oil or components.
Lubrication of Main Body
Check the Main Body oil level with the oil gauge before each
operation. Change oil after the first 50 hours and every
200 hours. See “200 HOUR OR QUARTERLY ROUTINE
MAINTENANCE”.
Check each part of lose or broken bolts and nuts
Tighten loose Bolts and Nuts, if any. Check each part for fuel oil
leak. Replace broken or damaged parts, if any, with new ones.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164
  • Page 165 165
  • Page 166 166
  • Page 167 167
  • Page 168 168
  • Page 169 169
  • Page 170 170
  • Page 171 171
  • Page 172 172
  • Page 173 173
  • Page 174 174
  • Page 175 175
  • Page 176 176
  • Page 177 177
  • Page 178 178
  • Page 179 179
  • Page 180 180
  • Page 181 181
  • Page 182 182
  • Page 183 183
  • Page 184 184
  • Page 185 185
  • Page 186 186
  • Page 187 187
  • Page 188 188
  • Page 189 189
  • Page 190 190
  • Page 191 191
  • Page 192 192
  • Page 193 193
  • Page 194 194
  • Page 195 195
  • Page 196 196
  • Page 197 197
  • Page 198 198
  • Page 199 199
  • Page 200 200
  • Page 201 201
  • Page 202 202
  • Page 203 203
  • Page 204 204
  • Page 205 205
  • Page 206 206
  • Page 207 207
  • Page 208 208
  • Page 209 209
  • Page 210 210
  • Page 211 211
  • Page 212 212
  • Page 213 213
  • Page 214 214
  • Page 215 215
  • Page 216 216
  • Page 217 217
  • Page 218 218
  • Page 219 219
  • Page 220 220
  • Page 221 221
  • Page 222 222
  • Page 223 223
  • Page 224 224
  • Page 225 225
  • Page 226 226
  • Page 227 227
  • Page 228 228
  • Page 229 229
  • Page 230 230
  • Page 231 231
  • Page 232 232
  • Page 233 233
  • Page 234 234
  • Page 235 235
  • Page 236 236
  • Page 237 237
  • Page 238 238
  • Page 239 239
  • Page 240 240
  • Page 241 241
  • Page 242 242
  • Page 243 243
  • Page 244 244
  • Page 245 245
  • Page 246 246
  • Page 247 247
  • Page 248 248
  • Page 249 249
  • Page 250 250
  • Page 251 251
  • Page 252 252
  • Page 253 253
  • Page 254 254
  • Page 255 255
  • Page 256 256
  • Page 257 257
  • Page 258 258
  • Page 259 259
  • Page 260 260
  • Page 261 261
  • Page 262 262
  • Page 263 263
  • Page 264 264
  • Page 265 265
  • Page 266 266
  • Page 267 267
  • Page 268 268
  • Page 269 269
  • Page 270 270
  • Page 271 271
  • Page 272 272
  • Page 273 273
  • Page 274 274
  • Page 275 275
  • Page 276 276
  • Page 277 277
  • Page 278 278
  • Page 279 279
  • Page 280 280
  • Page 281 281
  • Page 282 282
  • Page 283 283
  • Page 284 284
  • Page 285 285
  • Page 286 286
  • Page 287 287
  • Page 288 288

Ingersoll-Rand RX-264H Operation & Maintenance Manual

Tipo
Operation & Maintenance Manual
Este manual também é adequado para