11
EN
5.2 Using the newborn inlay
e Evoluna i-Size 2 is equipped with a comfort insert for newborns.
is inlay ensures a more level position of your baby in the infant car
-
rier. is comfort inlay may only be used for babies up to the age of
6 months (g. 3). To remove the inlay, open the buckle and remove
the insert from the shoulder belts.
5.3 Using the sunshade
To extend the sunshade pull the hood towards the foot end of the car
seat. To retract the sunshade push towards the head end of the car
seat.
e sunshade is detachable. To do this, rst pull the soft top from the
shell (g. 4). en press the sunshade release button inwards (g. 5,
no. 1) and pull the sunshade joint o (g. 5, no. 2). Carry out this step on
both sides.
To attach the sunshade, insert the two joints into the respective guide
rail until they are locked (g. 6) and attach the soft top to the shell.
6. Buckling / unbuckling of the baby
6.1 Loosening the belt system
Turn the carry handle in to the carry position. Before you can adjust
the height of the shoulder belts, the belt system must be loosened.
For this purpose, keep the central adjuster pressed in the front un-
der the seating area (g. 7, no. 1), and pull the shoulder belts (g. 7,
no. 2) out.
6.2 Adjusting the height of the belt system
Open the front cover at the head end of the infant carrier by slightly
pressing the hooks upward. (g. 8, no. 1), now the cover opens (g. 8,
no. 2). Now turn the height adjuster handle 90° clockwise (g. 9, no. 1)