Lexmark X7500 Setup Manual

Tipo
Setup Manual

Este manual também é adequado para

www.lexmark.com
Setup Guide
August 2001
X820e MFP, X7500 MFP Option
Edition: August 2001
The following paragraph does not apply to any country where such provisions are inconsistent with local law:
LEXMARK INTERNATIONAL, INC., PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND,
EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express ome states do not allow disclaimer of express
or implied warranties in certain transactions; therefore, this statement may not apply to you.
This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the
information herein; these changes will be incorporated in later editions. Improvements or changes in the products or
the programs described may be made at any time.
Comments about this publication may be addressed to Lexmark International, Inc., Department F95/032-2, 740 West 740 West
New Circle Road, Lexington, Kentucky 40550, U.S.A. In the United Kingdom and Eire, send to Lexmark International he United Kingdom and Eire, send to Lexmark International
Ltd., Marketing and Services Department, Westhorpe House, Westhorpe, Marlow Bucks SL7 3RQ. Lexmark may use 3RQ. Lexmark may use
or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you.
You can purchase additional copies of publications related to this product by calling 1-800-553-9727. In the United 727. In the United
Kingdom and Eire, call 0628-481500. In other countries, contact your point of purchase.
References in this publication to products, programs, or services do not imply that the manufacturer intends to make
these available in all countries in which it operates. Any reference to a product, program, or service is not intended to Any reference to a product, program, or service is not intended to
state or imply that only that product, program, or service may be used. Any functionally equivalent product, program, or
service that does not infringe any existing intellectual property right may be used instead. Evaluation and verification of
operation in conjunction with other products, programs, or services, except those expressly designated by the
manufacturer, are the user’s responsibility.
Lexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc., registered in the United
States and/or other countries. ScanBack is a trademark of Lexmark International, Inc.
© Copyright 2001 Lexmark International, Inc.
All rights reserved.
UNITED STATES GOVERNMENT RESTRICTED RIGHTS
This software and documentation are provided with RESTRICTED RIGHTS. Use, duplication or disclosure by the CTED RIGHTS. Use, duplication or disclosure by the
Government is subject to restrictions as set forth in subparagraph (c)(1)(ii) of the Rights in Technical Data and
Computer Software clause at DFARS 252.227-7013 and in applicable FAR provisions: Lexmark International, Inc., ware clause at DFARS 252.227-7013 and in applicable FAR provisions: Lexmark International, Inc.,
Lexington, KY 40550.KY 40550.
v
Step 1: Set up your printer our printer . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Modifying your high capacity feeder or base cabinet . . . . . . . .1
Selecting a location for your MFP . . . . . . . . . . . . . . . . . . . . . . .3
Step 2:2: Set up the scanner stand canner stand . . . . . . . . . . . . . . . . . . . . 4
Unpacking the stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Assembling the stand bling the stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Step 3: Install the control unit ll the control unit . . . . . . . . . . . . . . . . . . . . . . . 6
Step 4: Mount the power supply unt the power supply supply . . . . . . . . . . . . . . . . . . . . . 8
Step 5:5: Attach the stand to the printer nd to the printer . . . . . . . . . . . . . . . . 9
Attaching the optional finisher . . . . . . . . . . . . . . . . . . . . . . . . . .9
Step 6: Install the scanner stall the scanner . . . . . . . . . . . . . . . . . . . . . . . . . 100
Unpacking the scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Installing the scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
vi
Step 7: Attach cables and cords nd cords . . . . . . . . . . . . . . . . . . . . 11
Step 8:ep 8: Complete the hardware setup he hardware setup p . . . . . . . . . . . . . . . . 13
Installing the printer operator panel cover . . . . . . . . . . . . . . .13
Attaching the Quick Reference . . . . . . . . . . . . . . . . . . . . . . . .14
Turning on the control unit and printer . . . . . . . . . . . . . . . . . .15
Step 9: Configure your MFP your MFP . . . . . . . . . . . . . . . . . . . . . . . . 166
Setting the IP address P address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Configuring Scan to E-mail mail . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Configuring Fax Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .177
Registering with a Windows NT domain server T domain server . . . . . . . . . . .18
Step 10: Verify setup p . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Making a test copy py . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Sending a test fax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Sending a test e-mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Sending a network print job to the MFP work print job to the MFP . . . . . . . . . . . . . . . . .20
Troubleshootingeshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211
If you need more help f you need more help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Maintaining your MFPur MFP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Cleaning the touch screen ch screen . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Cleaning the scanner bed . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Cleaning the scanner rollers . . . . . . . . . . . . . . . . . . . . . . . . . .22
Cleaning the scanner pick pads . . . . . . . . . . . . . . . . . . . . . . .24
Lexmark Document Distributorxmark Document Distributorument Distributorbutor . . . . . . . . . . . . . . . . . . . . . 25
vii
Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Safety information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Emission notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Telecommunications notices . . . . . . . . . . . . . . . . . . . . . . . . .288
viii
1
Set up your printer
Your printer supports either an optional
high capacity feeder or an optional base
cabinet. You need one of these options
for your printer to fit properly into the
stand.
Whether you have a printer that you
need to set up, or you already have an
installed printer, you need to modify your
high capacity feeder or base cabinet.
Modifying yourur
high capacity feedery feeder
or base cabinetcabinet
If you havent set up your printer yet,
unpack the high capacity feeder or base
cabinet and remove any packing
materials. Be sure to remove any foam
and tape from inside. Save the carton
and packing materials if you need to
repack the option later.
You need a Phillips screwdriver to modify Phillips screwdriver to modify
and install the high capacity feeder.
Note: If you prefer not to disassemble
the printer, use a 7/32 socket wrench to
reach under the base cabinet and
remove the stabilizer feet.zer feet.
If you have already set up your printer,
you need to disassemble it and remove
the high capacity feeder or base cabinet.
Refer to Removing printer parts on the
printer publications CD for information on
how to do this.
2
Set up your printer
1 Place the high capacity feeder or
base cabinet on its back.
2 Remove the four screws attaching
the two stabilizer feet as shown.
Remove the stabilizer feet.
3 Return the high capacity feeder or
base cabinet to its upright
position.
4 Set up the drawer or high capacity
feeder, your printer, and any other
paper handling options except an
optional finisher. If you have a
finisher, attach it later. For For
instructions on how to install these
items, refer to your printer Setup
Guide.
5 Verify the printer hardware setup
by printing the menu settings
page.
6 Unplug all power cords, fax and
phone cables, and network cables
from their electrical outlets. This
includes all cords and cables
attached to a computer, printer,
scanner, and any other
peripherals connected to an
outlet.
3
Set up your printer
Selecting a locationocation
for your MFPMFP
When choosing a place to set up your
MFP, make sure you have the minimum
amount of space indicated in the figure.
4
Set up the scanner stand
Unpacking the standcking the standand Unpack the MFP scanner stand. Save Save
the packing material until the system is
completely set up and working correctly.
Make sure you have the following items.
Right and left stand legs
Shelf
Shelf support
Base
Right and left base supports
Beam
Bag of screws:
7 short
28 medium
2 long
If any items are missing or damaged,
visit the Lexmark Web site at
www.lexmark.com for the designated com for the designated
Lexmark support phone number for your
country.
Right and left
stand legs
Shelf
Base
supports
Base
Beam
Shelf
support
Bag of
screws
5
Set up the scanner stand
Assembling the standling the stand
1 Slide the left and right legs onto
the extensions on the base. Make
sure the screw holes are facing in.
Secure the legs to the base each
with two medium screws.
2 Attach the base supports:
a Use two medium screws each
to attach the supports to the
legs.
b Use three medium screws
each to attach the supports to
the base.
3 Attach the beam to the legs with
six medium screws.
4 Attach the shelf to the legs with
four short screws.
5 Attach the shelf support to the
shelf with three short screws.
Note: Save the four remaining medium
screws for later use.
Shelf support
Shelf
Beam
Base
Base
support
3 short
4 short
6 medium
4 medium
10 medium
Right and
left legs
Short Medium Long
6
Install the control unit
1 Unpack the accessory kit, the
country specific accessory box,
and the control unit box. Make Make
sure you have the following items:
a Control unit
b Power supply
c Power supply bracket
d Telephone fax line cable
(RJ-11)
e Ethernet cable (RJ-45) (with
toroid)
f Operator panel housing
g Power switch coverver
h Operator panel cover
i Folder with Setup Guide, MFP
CD, and a set of Quick
References (in different
languages)
j Power supply line cord
k Two nuts and bolts
The box may also contain an adapter for
telephone fax line cable (not shown).
i: Folder
g: Power
switch cover
h: Operator panel cover
a: Control unit
d: Telephone fax
line cable (RJ-11)
b: Power supply
j: Power supply
line cord
k. Nuts and
bolts
f: Operator
panel housing
c: Power supply
bracket
e: Ethernet
cable (RJ-45)
7
Install the control unit
2 Move to the back of the stand.
3 Hold the control unit so the cable
connection ports are toward the
left and the mounting tabs are on g tabs are on
the top and bottom.
Note: If the control unit doesnt slide in
easily, loosen the screws on the beam.
After you install the control unit retighten
these screws.
4 Slide the unit between the stand
legs. Align the holes on the
mounting tabs with the holes on
the stand beam and the base.
5 Attach the control unit to the stand
with the four screws you saved in
Assembling the stand on page 5.
Leave the top two screws slightly
loose.
8
Mount the power supply
1 Align the two mounting tabs on the power supply with the holes
on the bracket.
2 Attach the power supply to the bracket with two nuts and bolts.
3 Orient the power supply so that it faces toward the front of the
printer.
4 Attach the bracket to the beam:
a Slide the grooves on the bottom of the bracket behind the
heads of the top two screws on the control unit.
b Tighten the screws to secure the bracket.
9
Attach the stand to the printer
1 Back the printer up to the stand
and slide it in between the two
stand legs.
2 Align the mounting posts on the
stand base with the first hole on
both sides of the printer.
3 Secure the stand to the printer
with two long screws.
Attaching the
optional finisherer
If you purchased an optional finisher,
attach it now. Refer to the printer Refer to the printer Setup
Guide for instructions.
10
Install the scanner
Unpacking the scannerg the scanner Unpack the MFP scanner. Make sure
you have the following items:
Scanner
Scanner cable (with toroid)
Save the packing material until the
system is completely set up and working
correctly.
Installing the scannering the scanner 1 Make sure the printer is turned off
and unplugged.
2 Place the scanner on the shelf.
Align the handholds on the
scanner with the cutouts on the
shelf.
Toroid
11
Attach cables and cords
Do not plug the power supply line cord
into an outlet until later (see Turning on
the control unit and printer on page 15).
1 Make sure the printer and control ke sure the printer and control
unit are turned off and unplugged.
2 Attach the end of the scanner
cable with the toroid to the
scanner and the other end to the
control unit. Tighten the
thumbscrews on both ends of the
cable.
3 Connect the end of the Ethernet
cable (e) with the toroid to the
Ethernet port 1 on the control unit
and the other end to the printer.
4 Connect the adapter to the
telephone fax line cable if
necessary. Connect the telephone y. Connect the telephone
fax line cable (d) to the control unit
and then to a phone jack.
5 Connect standard cabling
compatible with your network to
the Ethernet port 2 on the control
unit, and then to a network
connection. This cable is not This cable is not
provided by Lexmark.
6 Connect the power supply (b) to
the control unit.
Scanner
cable
Printer
Ethernet
cable (e)
Network
Ethernet
cable
Telephone fax
line cable (d)
Power
supply (b)
Power
switch
Power supply
line cord (j)
12
Attach cables and cords
Warning! Never connect or disconnect
the scanner cable when the control unit
is turned on.
7 Connect the power supply line
cord (j) to the power supply, but j) to the power supply, but
do not plug the other end into an
electrical outlet at this time.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164
  • Page 165 165
  • Page 166 166
  • Page 167 167
  • Page 168 168
  • Page 169 169
  • Page 170 170
  • Page 171 171
  • Page 172 172
  • Page 173 173
  • Page 174 174
  • Page 175 175
  • Page 176 176
  • Page 177 177
  • Page 178 178
  • Page 179 179
  • Page 180 180
  • Page 181 181
  • Page 182 182
  • Page 183 183
  • Page 184 184
  • Page 185 185
  • Page 186 186
  • Page 187 187
  • Page 188 188
  • Page 189 189
  • Page 190 190
  • Page 191 191
  • Page 192 192
  • Page 193 193
  • Page 194 194
  • Page 195 195
  • Page 196 196
  • Page 197 197
  • Page 198 198
  • Page 199 199
  • Page 200 200
  • Page 201 201
  • Page 202 202
  • Page 203 203
  • Page 204 204
  • Page 205 205
  • Page 206 206
  • Page 207 207
  • Page 208 208
  • Page 209 209
  • Page 210 210
  • Page 211 211
  • Page 212 212
  • Page 213 213
  • Page 214 214
  • Page 215 215
  • Page 216 216
  • Page 217 217
  • Page 218 218
  • Page 219 219
  • Page 220 220
  • Page 221 221
  • Page 222 222
  • Page 223 223
  • Page 224 224
  • Page 225 225
  • Page 226 226
  • Page 227 227
  • Page 228 228
  • Page 229 229
  • Page 230 230
  • Page 231 231
  • Page 232 232
  • Page 233 233
  • Page 234 234
  • Page 235 235
  • Page 236 236
  • Page 237 237
  • Page 238 238
  • Page 239 239
  • Page 240 240
  • Page 241 241
  • Page 242 242
  • Page 243 243
  • Page 244 244
  • Page 245 245
  • Page 246 246
  • Page 247 247
  • Page 248 248
  • Page 249 249
  • Page 250 250
  • Page 251 251

Lexmark X7500 Setup Manual

Tipo
Setup Manual
Este manual também é adequado para

em outros idiomas