LG HBS-810 Manual do usuário

Categoria
Fones de ouvido móveis
Tipo
Manual do usuário
English
Español
Portuguese
Rev 2.0 SCA
HBS-810 User Manual
Bluetooth
®
Stereo Headset
Anatel: 4069-15-1003
(01) 07893299905780
English
All rights reserved. LG Electronics Inc., 2015
Note: Please read all information carefully prior to using the HBS-810 in
order to prevent product damage and to enjoy the best performance.
Any modications or changes to this manual due to typographical errors or
inaccuracies of stated information shall only be made by LG Electronics Inc.
HBS-810 User Manual
Bluetooth
®
Stereo Headset
ENG
ENG
2
Table of Contents
Introduction 3
- Included in the Package 3
Description of Parts 4
How to Use 5
- Power On/Power Off 5
- Charging 5
- Low Battery 5
- Battery Status Alert 5
- Retractable Earbuds 6
- Pairing 6
- Advanced Multipoint 7
- Auto Reconnect 8
- Calling 9
Answering a Call 9
• Transferring a Call 9
• Voice Dialing 9
• Last Number Redial 9
• Ending a Call 9
• Call Waiting 10
• Rejecting a Call 10
• Microphone Mute 10
- Volume Control 10
- Vibration Control 11
- Audio Streaming 11
- Equalizer 12
- aptX
®
12
- Tone & Talk
TM
12
Summary of Button Functions 14
LED Indicator 16
Troubleshooting 17
Specifications 18
Precautions 19
Declaration of Confirmation 20
Additional Information 22
Limited Warranty 26
(Except Mexico and Argentina)
Important Safety Information 27
ENG
ENG
3
Introduction
The LG TONE ULTRA
TM
(HBS-810) is a lightweight wireless headset that uses Bluetooth
®
technology.
This product can be used as an audio accessory for devices supporting either the A2DP or
hands-free Bluetooth prole.
Included in the Package
Extra Ear Gels
(1 Set - Small)
*USB Charging
Cable
User Manual Warranty Card
(Argentina only)
*Actual product design may differ from images shown in this manual.
HBS-810
(Medium ear gels installed)
ENG
ENG
4
Description of Parts
Headset
FF/REW Jog Button
Charging Port
Microphone
Earbud (L)
LED Indicator
CALL Button
PLAY/PAUSE/STOP Button
Earbud (R)
Power Switch
VOLUME Jog Button (+/-)
ENG
ENG
5
How to Use
Power On/Power Off
- Slide the Power switch to the ON or
OFF position.
Charging
- When the charger is connected (with
the power on or off) the headset will
power off.
- While charging, the LED indicator will
show a solid red light. When charged
80% or more, the indicator will show a
violet light.
- When the device is fully charged, the
LED indicator will show a solid blue light.
Low Battery
- A low battery alert will play once every
2 minutes.
- If the battery is not charged, the headset
will power off.
Battery Status Alert
- Slide the VOLUME jog button to the “-”
position for 1 second to check the battery
status of the headset.
Battery
Status
High Medium
Low
Voice
Prompt
Battery
High
Battery
Medium
Battery
Low
LED
Indicator
Blinking
Blue
Blinking
Violet
Blinking
Red
NOTE: When paired, some mobile devices
may display the headset’s battery level at
the top of the screen.
ENG
ENG
6
How to Use
Retractable Earbuds
- Pull the earbuds to extend them to the
desired length.
- To retract the earbuds, pull the cords out
slightly, and they will automatically retract
into place.
- If the earbuds do not retract, pull the
earbuds out completely to retract them.
Pairing
Before using the headset for the rst time,
you must pair it with a Bluetooth-enabled
device.
1) Easy Pairing
1. Slide the Power switch to the ON
position.
2. If it is your rst time pairing the
device or it does not detect a
previously paired device, it will
enter Pairing mode. The LED
indicator will be solid blue.
3. Make sure the device you wish to
pair with is discoverable. Under
the Bluetooth menu, search for or
add new devices.
4. Select LG HBS810 from the list
of devices.
5. If asked for a Pass/Pin Code,
enter 0000 (4 zeros).
6. Once the devices are paired, you
will hear “Your headset paired.” If
a connection has been made, a
vibrating alert is generated.
NOTE: The headset will
automatically power off if not paired
within 3 minutes.
2) Manual Pairing (pairing with another
phone or re-pairing)
1. With the power off, press the CALL
button and slide the Power switch
to the ON position at the same
time for 2 seconds.
ENG
ENG
7
2. When the headset enters Pairing
mode, the LED indicator will show
a solid blue light. Repeat Easy
Pairing steps 3 through 6.
Advanced Multipoint
The headset can be connected to two
devices at the same time. This will give
you the freedom to use call waiting
between calls on both of your connected
phones.
Pairing with Two Devices
- First, pair the headset with the Bluetooth-
enabled mobile device you want to use
as your secondary device (see Pairing
instructions).
- Once paired, power off the headset.
- With the power off, press the CALL
button and slide the Power switch to
the ON position at the same time for 2
seconds to enter Manual Pairing mode.
- Pair and connect the headset with your
other Bluetooth-enabled mobile device.
This will be your primary device.
- Once the primary mobile device is
paired and connected with the headset,
reconnect the headset to the initially
paired mobile device.
NOTE: If a connection has been made, a
vibrating alert is generated.
NOTE: When the headset is connected
to two mobile devices at the same time
(Multipoint), the headset calling functions
will work with the primary mobile device.
NOTE: If the headset fails to connect to
the primary phone through Easy Pairing, it
will enter Pairing mode.
Calling
- Voice Dialing and Last Number Redial
features work with the primary mobile
device (or the mobile device that made
the last outgoing call).
How to Use
ENG
ENG
8
How to Use
Call Waiting
- While on a call, press the CALL button for
1 second to answer an incoming call.
- To switch between two active calls, press
the CALL button for 1 second.
- To end both calls, briey press the
CALL button.
- If both paired mobile devices are
receiving an incoming call, the headset
will default to the primary device.
Auto Reconnect
- If in range of each other when the
headset is powered on, the headset
and the primary mobile device will
automatically reconnect.
- The secondary mobile device will need
to be manually connected. Select LG
HBS810 from the list of devices in the
Bluetooth menu and pair.
NOTE: If a connection has been made, a
vibrating alert is generated.
Out of Range
- If the paired devices are separated by
a range of 33 feet (10 meters) or more,
the headset and mobile device will
disconnect, and the headset will vibrate
to alert you.
NOTE: To power off device vibration, slide
the VOLUME jog button to the “+” position
and hold for 2 seconds.
- If the headset and mobile device do not
automatically reconnect when they are
back within the required range, briey
press the CALL button on the headset to
manually reconnect.
- While in multi-connection and streaming,
the inactive paired device will be
disconnected when out of range. The
headset will alert you once with no
attempt to reconnect.
ENG
ENG
9
Calling
Answering a Call
- When receiving an incoming call, the
headset will ring and vibrate.
- Briey slide the VOLUME jog button to
the “-” position to stop the vibration.
NOTE: The headset will not vibrate if
vibration has been deactivated.
- Briey press the CALL button to answer
the incoming call.
Transferring a Call
- You can manually transfer the call to
or from the headset by pressing the
PLAY/PAUSE/STOP button twice on
the headset (mobile device and headset
must be paired).
Voice Dialing
- Briey press the CALL button to activate
Voice Command. For best results,
record the voice dialing tag through your
headset.
NOTE: If your mobile device does not
support voice dialing, this action may
activate Last Number Redial.
Last Number Redial
- Press and hold the CALL button for 1
second to activate Last Number Redial.
The headset will beep and then call the
last number dialed.
Ending a Call
- Briey press the CALL button.
How to Use
ENG
ENG
10
How to Use
Call Waiting
- Answer a second call without hanging up
the rst call by pressing the CALL button
for 1 second. Press the CALL button for 1
second to return to the rst call.
- Briey press the CALL button to end
both calls.
Rejecting a Call
- Activate Call Reject by pressing the CALL
button for 2 seconds when the mobile
device rings.
NOTE: These functions may not be
available on all mobile devices. For further
information about using these features,
please consult your mobile device’s user
manual.
Microphone Mute
- Slide the VOLUME jog button to the “+”
position and the FF/REW jog button to
the REW position at the same time for 1
second to mute/unmute the microphone
during conversation.
Caution: For your safety, do not use this
function while driving.
Volume Control
- Slide the VOLUME jog button to the
“+” or “-” position to adjust the speaker
volume.
Caution: Listening to music for long
periods of time at high volume levels may
cause hearing damage or loss. To prevent
this, the headset will emit a warning beep
when you are using the upper 6 volume
levels.
ENG
ENG
11
Vibration Control
- To activate or deactivate the device
vibration, slide the VOLUME jog button
to the “+” position for 2 seconds. You will
hear “Vibrate on” or “Vibrate off” when it
is activated or deactivated.
- When vibration is deactivated, the
headset will not vibrate when receiving
an incoming call or when it is out of range
of a paired mobile device.
- Vibration will automatically be reactivated
when the device is powered on.
NOTE: When pairing the headset with a
mobile device, the headset will vibrate
when pairing is complete, even if the
vibration function is deactivated.
Audio Streaming
Play
- Briey press the PLAY/PAUSE/STOP
button.
Pause
- While playing music, briey press the
PLAY/PAUSE/STOP button.
Stop
- While playing music, press and hold the
PLAY/PAUSE/STOP button for 1 second.
Next song
- Briey slide the FF/REW jog button to the
FF position.
Previous song
- Briey slide the FF/REW jog button to the
REW position.
Fast Forward
- Slide and hold the FF/REW jog button to
the FF position.
Rewind
- Slide and hold the FF/REW jog button to
the REW position.
How to Use
ENG
ENG
12
How to Use
Equalizer
- While playing music, press the PLAY/
PAUSE/STOP button twice to switch
between Bass Boost (default), Normal,
and Treble Boost.
NOTE: The size of the ear gel can affect
the amount of bass you hear.
aptX
®
- The headset features aptX technology
that ensures audio content transmitted
via Bluetooth is seamless and crystal
clear.
- aptX is automatically enabled as long as
the source device supports it.
Tone & Talk
TM
The HBS-810 Bluetooth headset supports
SMS reading on Android
TM
-based devices.
To download the app, search for Tone &
Talk in Google Play
TM
* or scan the QR
code. Follow the installation instructions.
*Google Play is a trademark of Google,
Inc.
ENG
ENG
13
Function Action
Current time alert
Slide the FF/REW jog button to the FF position for 1 second.
Read latest SMS or MMS
Slide the FF/REW jog button to the REW position for 1 second.
Designated contact
1. Select Designated contact in the headset call settings of
the app.
2. To call the Designated contact, press the CALL button twice
on your headset.
Favorite contacts
1. Select Favorite contacts in the headset call settings of
the app.
2. Press the CALL button twice on your headset.
3. Use the FF/REW jog button to choose the contact.
4. To call the Favorite contact, press the CALL button twice.
Call logs
1. Select Call logs in the headset call settings of the app.
2. Press the CALL button twice on your headset.
3. Use the FF/REW jog button to choose the contact.
4. To call the contact, press the CALL button twice.
How to Use
ENG
ENG
14
Summary of Button Functions
Function Headset Status Action
Power on Power off
Slide the Power switch to the ON position.
Power off Power on
Slide the Power switch to the OFF position.
Volume up Talking/Music on
Slide the VOLUME jog button to the “+” position.
Volume down Talking/Music on
Slide the VOLUME jog button to the “-” position.
Transferring a call Talking
Press the PLAY/PAUSE/STOP button twice.
Answering a call Ringing
Briey press the CALL button.
Stop incoming call
vibration
Ringing
Briey slide the VOLUME jog button to the “-” position.
Vibration on/off Idle
Slide the VOLUME jog button to the “+” position for 2 seconds.
Ending a call Talking
Briey press the CALL button.
Call waiting Talking
Press the CALL button for 1 second.
Last number redial Idle
Press the CALL button for 1 second.
Voice dialing
(must be supported on
mobile device)
Idle
Briey press the CALL button.
ENG
ENG
15
Summary of Button Functions
Function Headset Status Action
Call reject Ringing
Press the CALL button for 2 seconds.
Microphone mute
on/off
Talking
Slide the VOLUME jog button to the “+” position and the FF/REW
jog button to the REW position at the same time for 1 second.
Pairing mode (Manual) Power off
Press the CALL button and slide the Power switch to the ON
position at the same time for 2 seconds.
Battery status check Idle
Slide the VOLUME jog button to the “-” position for 1 second.
Play Power on
Briey press the PLAY/PAUSE/STOP button.
Pause Music on
Briey press the PLAY/PAUSE/STOP button.
Stop Music on
Press and hold the PLAY/PAUSE/STOP button for 1 second.
Next song Music on
Briey slide the FF/REW jog button to the FF position.
Previous song Music on
Briey slide the FF/REW jog button to the REW position.
Fast forward Music on
Slide and hold the FF/REW jog button in the FF position.
Rewind Music on
Slide and hold the FF/REW jog button in the REW position.
Equalizer settings Music on
Press the PLAY/PAUSE/STOP button twice.
ENG
ENG
16
LED Indicator
Function Headset Status
Indicator
Operating
Power on The blue LED light ickers 4 times.
Power off The blue LED light ickers 4 times, then powers off.
Pairing mode Solid blue LED light.
Headset/hands-free
prole connected
The blue LED light ickers 1 time every 5 seconds.
Call connected The blue LED light ickers 1 time every 5 seconds.
Charging
Charging
Solid red LED light, which changes to violet when
charged 80% or more.
Charging complete Solid blue LED light.
ENG
ENG
17
Troubleshooting
Problem Possible Causes Possible Solution
Does not power on
Check whether the battery of the
headset is fully charged.
Charge the battery.
Unable to
communicate with
the LG Bluetooth
Headset HBS-810
Check whether the mobile device
you are trying to pair supports the
headset or hands-free
Bluetooth
proles.
Determine whether your mobile
device supports the headset or
hands-free Bluetooth proles.
Check whether the battery of the
headset is low.
Charge the battery.
Unable to pair the
HBS-810 with the
Bluetooth device
Check to make sure the headset is on.
Slide the Power switch to the ON
position to power on the headset.
Check to make sure the headset is
placed in Pairing mode.
With the power off, press the CALL
button and slide the Power switch to
the ON position at the same time for 1
second to manual place the headset
in Manual Pairing mode.
Low sound (speaker) Check the speaker volume. lncrease the volume level.
ENG
ENG
18
Specications
Item Description
Electrical data Operating
4.75 - 5.3 V
0
400 mV
Bluetooth version
4.1 (Headset/Hands-Free/A2DP proles)
Battery
Battery 3.7 V/220 mAh Li-Polymer
Talk time Up to 17 hours
Music play time Up to 13 hours
Standby time Up to 550 hours
Charging time Less than 2 hours
Operation temperature 14°F ~ 140°F (-10°C ~ 60°C)
Dimensions/weight 147mm(W)x164mm(L)x14.9mm(H)/41g
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90

LG HBS-810 Manual do usuário

Categoria
Fones de ouvido móveis
Tipo
Manual do usuário

em outros idiomas