Hach HQ40d Basic User Manual

DOC022.98.80017

HQd Portable Meter

10/2017, Edition 6

Basic User Manual

Basis-Bedienungsanleitung

Manuale utente di base

Manuel d'utilisation de base

Manual básico del usuario

Manual de operações básicas

Základní uživatelská příručka

Grundlæggende brugervejledning

Basisgebruikershandleiding

Podstawowa instrukcja obsługi

Basic User Manual

Peruskäyttöohje

Основно ръководство за потребителя

Alap felhasználói kézikönyv

Manual de bază al utilizatorului

Bendroji naudotojo instrukcija

Основное руководство пользователя

Temel Kullanıcı Kılavuzu

Základný návod na použitie

Osnovni uporabniški priročnik

Osnovni korisnički priručnik

Βασικό εγχειρίδιο χρήστη

Kokkuvõtlik kasutusjuhend

Osnovno korisničko uputstvo

Основно упатство за користење

English...................................................................................................................................................................................................4

Deutsch...............................................................................................................................................................................................18

Italiano................................................................................................................................................................................................. 33

Français.............................................................................................................................................................................................. 48

Español............................................................................................................................................................................................... 63

Português.......................................................................................................................................................................................... 78

Čeština................................................................................................................................................................................................ 92

Dansk.................................................................................................................................................................................................106

Nederlands...................................................................................................................................................................................... 120

Polski................................................................................................................................................................................................. 135

Svenska............................................................................................................................................................................................ 150

Suomi.................................................................................................................................................................................................164

български....................................................................................................................................................................................... 178

Magyar.............................................................................................................................................................................................. 194

Română............................................................................................................................................................................................ 208

lietuvių kalba...................................................................................................................................................................................223

Русский............................................................................................................................................................................................ 237

Türkçe................................................................................................................................................................................................253

Slovenský jazyk............................................................................................................................................................................ 267

Slovenski.......................................................................................................................................................................................... 281

Hrvatski............................................................................................................................................................................................. 295

Ελληνικά........................................................................................................................................................................................... 309

eesti keel.......................................................................................................................................................................................... 325

Српски.............................................................................................................................................................................................. 339

2

Македонски....................................................................................................................................................................................353

3

Table of contents

Specifications on page 4

General information on page 4

Installation on page 6

User interface and navigation on page 8

Startup on page 10

Standard operation on page 11

Data management on page 12

Maintenance on page 14

Troubleshooting on page 15

Specifications

Specifications are subject to change without notice.

Specification Details

Dimensions 19.7 x 9.5 cm (7.75 x 3.75 in.)

Weight 335 g (0.75 lb) without batteries; 430 g (0.95 lb) with

four AA alkaline batteries

Meter enclosure IP67, waterproof to 1 meter for 30 minutes

Battery enclosure Water resistant to 0.6 m (2 ft) for 15 seconds

Power requirements

(internal)

AA Alkaline or rechargeable Nickel Metal Hydride

(NiMH) batteries (4); battery life: up to 200 hours

Power requirements

(external)

Class II, external power adapter: 100–240 VAC,

50/60 Hz input; 4.5 to 7.5 VDC (7 VA) output

Meter protection class Class I

Storage temperature –20 to +60 °C (–4 to +140 °F)

Operating temperature 0 to +60 °C (32 to 140 °F)

Operating humidity 90% (non-condensing)

5-pin input connector M12 connector for IntelliCAL

™

probes

8-pin input connector The 8-pin connector enables USB and external AC

power connectivity

USB/DC adapter Peripheral and host

Data memory (internal) 500 results

Specification Details

Data storage Automatic in Press to Read mode and Interval

Mode. Manual in Continuous Read Mode.

Data export USB connection to PC or USB storage device

(limited to the storage device capacity). Transfer

entire data log or as readings are taken.

Connections Integrated USB type A (for USB flash memory

device, printer, keyboard) and Integrated USB type

B (for PC)

Temperature correction Off, automatic and manual (parameter dependent)

Measurement display lock Continuous measurement, Interval or Press to Read

mode. Averaging function for LDO probes.

Keyboard External PC keyboard connector via USB/DC

adapter

Additional information

Additional information is available on the manufacturer's website.

General information

In no event will the manufacturer be liable for direct, indirect, special,

incidental or consequential damages resulting from any defect or

omission in this manual. The manufacturer reserves the right to make

changes in this manual and the products it describes at any time, without

notice or obligation. Revised editions are found on the manufacturer’s

website.

Safety information

N O T I C E

The manufacturer is not responsible for any damages due to misapplication or

misuse of this product including, without limitation, direct, incidental and

consequential damages, and disclaims such damages to the full extent permitted

under applicable law. The user is solely responsible to identify critical application

risks and install appropriate mechanisms to protect processes during a possible

equipment malfunction.

4 English

Please read this entire manual before unpacking, setting up or operating

this equipment. Pay attention to all danger and caution statements.

Failure to do so could result in serious injury to the operator or damage

to the equipment.

Make sure that the protection provided by this equipment is not impaired.

Do not use or install this equipment in any manner other than that

specified in this manual.

Use of hazard information

D A N G E R

Indicates a potentially or imminently hazardous situation which, if not avoided, will

result in death or serious injury.

W A R N I N G

Indicates a potentially or imminently hazardous situation which, if not avoided,

could result in death or serious injury.

C A U T I O N

Indicates a potentially hazardous situation that may result in minor or moderate

injury.

N O T I C E

Indicates a situation which, if not avoided, may cause damage to the instrument.

Information that requires special emphasis.

Precautionary labels

Read all labels and tags attached to the instrument. Personal injury or

damage to the instrument could occur if not observed. A symbol on the

instrument is referenced in the manual with a precautionary statement.

This symbol, if noted on the instrument, references the instruction

manual for operation and/or safety information.

This symbol indicates that the marked item can be hot and should not

be touched without care.

Electrical equipment marked with this symbol may not be disposed of

in European domestic or public disposal systems. Return old or end-

of-life equipment to the manufacturer for disposal at no charge to the

user.

Product overview

The HQd series portable meters are used with digital IntelliCAL

™

probes

to measure various parameters in water. The meter automatically

recognizes the type of probe that is connected to the meter.

Measurement data can be stored and transferred to a printer, PC or USB

storage device.

The HQd series meters are available in 4 models:

• HQ11d—pH/mV/ORP

• HQ14d—conductivity, salinity, total dissolved solids (TDS), resistivity

• HQ30d—all IntelliCAL probes, 1 probe connector

• HQ40d—all IntelliCAL probes, 2 probe connectors

Features common to all models:

• Automatic probe and parameter recognition

• Instrument guided calibration procedures

• Calibration data stored in the probe

• Probe specific method settings for regulatory compliance and Good

Laboratory Practice (GLP)

• Security Options

• Real-time data logging via USB connection

• USB connectivity to PC/printer/USB storage device/keyboard

English

5

• Bi-directional communication with PC-based systems via a virtual

serial port connection

• Sample ID and Operator ID for data traceability

• Adjustable automatic shut-off

Product components

Refer to Figure 1 and Figure 2 to make sure that all components have

been received. If any items are missing or damaged, contact the

manufacturer or a sales representative immediately.

Figure 1 Meter components (HQ40d model)

1 Meter 4 AC-DC power supply

2 AA batteries (pk/4) 5 USB/DC adapter

3 AC power cord

Figure 2 Meter components (HQ11d, HQ14d and HQ30d models)

1 Meter 2 AA batteries (pk/4)

Installation

C A U T I O N

Multiple hazards. Only qualified personnel must conduct the tasks

described in this section of the document.

6 English

Install the batteries

W A R N I N G

Explosion hazard. Incorrect battery installation can cause the release of explosive

gases. Be sure that the batteries are of the same approved chemical type and

are inserted in the correct orientation. Do not mix new and used batteries.

N O T I C E

The battery compartment is not waterproof. If the battery compartment becomes

wet, remove and dry the batteries and dry the interior of the compartment. Check

the battery contacts for corrosion and clean them if necessary.

N O T I C E

When using nickel metal hydride (NiMH) batteries, the battery icon will not

indicate a full charge after freshly charged batteries have been inserted (NiMH

batteries are 1.2 V versus 1.5 V for alkaline batteries). Even though the icon does

not indicate complete charge, 2300 mAH NiMH batteries will achieve 90% of

instrument operation lifetime (before recharge) versus new alkaline batteries.

N O T I C E

To avoid potential damage to the meter from battery leakage, remove the meter

batteries prior to extended periods of non-use.

The meter can be powered with AA alkaline or rechargeable NiMH

batteries. To conserve battery life, the meter will power off after

5 minutes of inactivity. This time can be changed in the Display Options

menu.

For battery installation refer to Figure 3.

1. Pull the release tab on the battery cover and the remove the cover.

2. Install 4 AA alkaline or 4 AA nickel metal hydride (NiMH) batteries.

Make sure that the batteries are installed in the correct polarity.

3. Replace the battery cover.

Figure 3 Battery installation

1 Batteries 2 Release tab 3 Battery cover

Connect to AC power

D A N G E R

Electrocution Hazard. AC power outlets in wet or potentially wet

locations MUST ALWAYS be provided with a Ground Fault Circuit

Interrupting (GFCI/GFI) circuit breaker. The AC-DC power adapter for

this product is not sealed and must not be used on wet benches or in

wet locations without GFCI protection.

English 7

The meter can be powered by AC power with an AC power adapter kit.

The kit includes an AC-DC power supply, USB/DC adapter and AC

power cord.

1. Turn the meter off.

2. Plug the AC power cord into the AC-DC power supply (Figure 4).

3. Connect the AC-DC power supply to the USB/DC adapter.

4. Connect the USB/DC adapter to the meter.

5. Plug the AC power cord into an AC receptacle.

6. Turn the meter on.

Figure 4 AC power connection

1 USB storage device/printer/Qwerty

keyboard connection (USB

peripheral)

4 AC-DC power supply

2 Personal computer connection

(USB host)

5 AC power cord

3 USB/DC adapter

User interface and navigation

User interface

Figure 5 Keypad description

1 ON/OFF: turn on or turn off the

meter

6 UP and DOWN key: scroll through

menus, enter numbers and letters

or change the reading screen view

2 OPERATOR ID: associate data with

an individual

7 GREEN/RIGHT key: reads, selects,

confirms or stores data

3 BACKLIGHT: illuminate the display

screen

8 DATA LOG: recall or transfer stored

data

4 SAMPLE ID: associate data with a

sample location

9 METER OPTIONS: change

settings, run check standards, view

meter information

5 BLUE/LEFT key: calibrates, cancels

or exits the current menu

Display description

Measurement screen

The meter display shows the concentration, units, temperature,

calibration status, operator ID, sample ID, date and time (Figure 6).

8

English

Figure 6 Single screen display

1 Calibration status indicator 9 Time

2 Main measurement value and unit 10 Date

3 IntelliCAL probe type and port

indicator

11 Read (OK, Select)

4 Battery status 12 Display size icon

5 Power source 13 Calibrate (Cancel, Exit)

6 Sample temperature (ºC or ºF) 14 Sample and operator identification

7 Secondary measurement unit 15 Stability or display lock indicator

8 Tertiary units (for some probes)

Dual-screen mode (HQ40d model only)

When two probes are connected to the HQ40d meter, the display can

show the reading from both probes simultaneously or show just one

probe (Figure 7).

Note: For probe calibration, change the screen mode to the single screen mode.

To change the screen mode to single or dual screen, use the and

keys. In dual screen mode, the key will select the probe on the

left and the key will select the probe on the right.

Figure 7 Dual-screen display

1 Probe that is connected to port on

left

3 Measurement information for probe

on left

2 Probe that is connected to port on

right

4 Measurement information for probe

on right

Navigation

The meter contains menus to change various options. Use the

and

keys to highlight different options. Push the GREEN/RIGHT key to

select an option. There are two ways to change options:

1. Select an option from a list: Use the and keys to select an

option. If check boxes are shown, more than one option can be

selected. Push the BLUE/LEFT key under Select.

Note: To deselect check boxes, push the BLUE/LEFT key under Deselect.

2. Enter an option value using the arrow keys:

Push the and keys to enter or change a value.

3. Push the GREEN/RIGHT key to advance to the next space.

4. Push the GREEN/RIGHT key under OK to accept the value.

English

9

Startup

Turn the meter on and off

Push the key to turn on or turn off the meter. If the meter does not

turn on, make sure that the batteries are properly installed or that the AC

power supply is properly connected to an electrical outlet.

Change the language

The display language is selected when the meter is powered on for the

first time. The language can also be changed from the Meter Options

menu.

Access to the language menu can be restricted with the Security

Options.

Additional information is available on the manufacturer's website.

1. Push the key and select Language.

2. Select a language from the list.

Note: While turning the meter on, the language can also be changed when the

power key is pushed and held.

Change the date and time

The date and time can be changed from the Date & Time menu.

1. Push the key and select Date & Time.

2. Update the time and date information:

Option Description

Format Select one of the formats below for the date and time. Use the

and keys to select from the format options.

dd-mm-yyyy 24h

dd-mm-yyyy 12h

mm/dd/yyyy 24h

mm/dd/yyyy 12h

dd-mmm-yyyy 24h

dd-mmm-yyyy 12h

yyyy-mm-dd 24h

yyyy-mm-dd 12h

Date Use the and keys to enter the current date.

Time Use the and keys to enter the current time.

The current date and time will be shown on the display.

Connect a probe after the date and time setup, so that the meter is ready

to take a measurement.

Connect a probe

1. Make sure that the display shows the current time and date.

Note: The time stamp for a probe is set when the probe is first connected to

the meter. This time stamp makes it possible to record the probe history and

record the time when measurements are made.

2. Plug the probe into the meter (Figure 8).

3. Push and turn the locking nut to tighten.

10

English

Figure 8 Probe connection

1 Probe connection port

(HQ40d only)

2 USB/DC adapter port 3 Probe connection port

Standard operation

About calibration

Each probe uses a different type of calibration solution. Make sure to

calibrate the probes frequently to maintain the highest level of accuracy.

Note: For step-by-step instructions, refer to the documents that are included with

each probe.

The calibration icon

can indicate that:

• the calibration timer has expired

• the LDO sensor cap should be replaced

• the calibration is out of range

• the calibration results are outside acceptance criteria settings

About sample measurements

Each probe has specific preparation steps and procedures for taking

sample measurements. For step-by-step instructions, refer to the

documents that are included with the probe.

About check standards

Run Check Standards verifies equipment accuracy by measuring a

solution of a known value. The meter will indicate if the Check Standard

passed or failed. If the Check Standard fails, the calibration icon is

shown until the probe is calibrated.

The meter can be set to automatically show a reminder for check

standard measurement at a specified interval with a specified

acceptance criteria. The reminder, value of the check standard, and

acceptance criteria can be changed. For step-by-step instructions, refer

to the documents that are included with the probe.

Use a sample ID

The sample ID tag is used to associate measurements with a particular

sample location. If assigned, stored data will include the sample ID.

1. Push the key.

2. Select, create or delete a sample ID:

Option Description

Current ID Select an ID from a list. The current ID will be

associated with sample data until a different ID is

selected.

Create a New Sample

ID

Enter a name for a new sample ID.

Delete Sample ID Delete an existing sample ID.

English 11

Use an operator ID

The operator ID tag associates measurements with an individual

operator. All stored data will include the operator ID.

1. Push the key.

2. Select, create or delete an operator ID:

Option Description

Current ID Select an ID from a list. The current ID will be

associated with sample data until a different ID is

selected.

Create a New

Operator ID

Enter a name for a new operator ID (maximum

10 names can be entered).

Delete Operator ID Delete an existing operator ID.

Data management

About stored data

The following types of data are stored in the data log:

• Sample measurements: stored automatically each time a sample is

measured in the Press to Read or Interval Mode. When the

continuous measurement mode is used, data is stored only when

Store is selected.

• Calibrations: stored only when Store is selected at the end of a

calibration. Calibration data is also stored in the IntelliCAL (R) probe.

• Check standard measurements: stored automatically each time a

check standard is measured (in the Press to Read or Interval Mode).

When the data log becomes full (500 data points), the oldest data point

is deleted when a new data point is added. The entire data log can be

deleted to remove data that has already been sent to a printer or PC

(

key > Delete Data Log). To prevent deletion of the data log by a

user, use the Security Options menu.

View stored data

The data log contains sample, calibration and check standard data. The

most recent data point in the data log is tagged as Data Point 001.

1. Push the key.

2. Select View Data Log to view the stored data. The most recent data

point is shown. The top of the screen shows whether the data is from

a sample reading, a calibration or a check standard. Push the

key to view the next most recent data point.

Option Description

Reading Log Reading Log—shows sample measurements including

the time, date, operator and sample ID. Select Details to

view the associated calibration data.

Calibration Log Calibration Log—shows calibration data. Select Details

to view additional information about the calibration.

Check Standard

Log

Check Standard Log—shows check standard

measurements. Select Details to view the calibration

data that was associated with the measurement.

12 English

View stored probe data

Make sure that a probe is connected to the meter. If two probes are

connected, select the appropriate probe when prompted.

1. To view the calibration data that is stored in a probe, push the

key and select View Probe Data. The current calibration and

calibration history for the probe can be viewed.

Option Description

View Current

Calibration

The current calibration information shows the calibration

details for the most recent calibration. If the probe has

not been calibrated by the user, the factory calibration

data is shown.

View Calibration

History

The calibration history shows a list of the times when the

probe was calibrated. Select a date and time to view a

summary of the calibration data.

Print stored data

The meter must connect to AC power to start the USB connection. Make

sure that the connection to AC power is made before the meter is

powered on.

All data can be sent to a printer. Compatible printers should support a

minimum of 72 columns of data, be capable of printing up to

500 continuous data-stream events in 1, 2 and 3 lines of text and fully

support code page 437 and code page 850.

1. Turn off the meter. Make sure that the meter is connected to AC

power. Refer to Connect to AC power on page 7.

2. Connect the printer to the meter with a USB cable type A. Refer to

Figure 9.

3. Turn on the meter.

4. Push the key.

5. Select Send Data Log. Wait for the display to show “Transfer

Complete” and wait for the printer to stop printing. Disconnect the

printer.

Figure 9 Connection to the printer

1 Meter 7 USB cable

2 AC-DC power supply 8 USB/DC adapter

3 AC power cord 9 Port for probe connection

4 AC power outlet 10 Port for USB/DC adapter

5 Power supply for printer (optional) 11 Port for probe connection

6 Printer, FCC Part 15B, Class B

compliant

Change the report options

Printed reports for sample data can contain 1, 2 or 3 lines of information.

English

13

Additional information is available on the manufacturer's website.

1. Push the key. Select Report Options.

2. Select Report Type and select one of the options.

Option Description

Basic report One line of data.

Advanced report Two lines of data. The first line contains the same

information as in the basic report.

Total report Three lines of data. The first two lines contain the same

information as in the advanced report.

Send data to a USB storage device

N O T I C E

The transfer of a large number of data points will take some time. DO NOT

disconnect the USB storage device until the transfer is complete.

Data can be transferred to a USB storage device for storage or transfer

to a computer.

1. Turn off the meter. Make sure that the meter is connected to AC

power.

2. Plug the USB storage device into the meter before the meter is

powered on.

3. Turn on the meter.

4. Push the key.

5. Select Send Data Log. Wait for the display to show “Transfer

Complete” and for any lights on the USB storage device to stop

flashing. Then remove the USB device.

Note: If the data transfer is slow, reformat the USB storage device to use the

file allocation table (FAT) format for the next use.

Send data directly to a computer

Data can be transferred from any HQd series meter directly to a

computer when the HQ40d PC Application is installed. The data can be

sent in real time during data collection, or the entire data log can be

transferred.

To download the most current version of the software, refer to the

applicable product page on the manufacturer's website.

1. Install the HQ40d PC Application on the computer.

2. Turn off the meter. Make sure that the meter is connected to AC

power.

3. Connect the PC to the meter with a USB type B cable.

4. Turn on the meter.

5. Open the HQ40d PC Application on the computer. Click on the green

triangle in the menu bar to start a connection.

6. Collect the data in real time or transfer the data from the data log:

• Real time—when a data point is stored in the meter, the result is

sent simultaneously to the PC Application.

Additional information is available on the manufacturer's website.

• Data log—push the key and select Send Data Log. Wait for

the display to show “Transfer Complete.” The data is sent as a

comma separated values (.csv) file.

The data is shown in the HQ40d PC Application window.

Maintenance

C A U T I O N

Multiple hazards. Only qualified personnel must conduct the tasks

described in this section of the document.

14 English

Clean the meter

The meter is designed to be maintenance-free and does not require

regular cleaning for normal operation. Exterior surfaces of the meter may

be cleaned as necessary.

1. Wipe the surface of the meter with a damp cloth.

2. Use a cotton-tipped applicator to clean or dry the connectors.

Replace the batteries

W A R N I N G

Explosion hazard. Incorrect battery installation can cause the release of explosive

gases. Be sure that the batteries are of the same approved chemical type and

are inserted in the correct orientation. Do not mix new and used batteries.

For battery replacement, refer to Figure 10. Make sure that the cover is

tightly closed to maintain the IP67 enclosure rating.

1. Pull the release tab on the battery cover and the remove the cover.

2. Remove the batteries.

3. Install 4 AA alkaline or 4 AA nickel metal hydride (NiMH) batteries.

Make sure that the batteries are installed in the correct polarity.

4. Replace the battery cover.

Figure 10 Battery replacement

1 Batteries 2 Release tab 3 Battery cover

Troubleshooting

Refer to the following table for common problem messages or

symptoms, possible causes and corrective actions.

English

15

Error/Warning Description Solution

Connect a Probe Probe disconnected

or connected

improperly

Tighten the locking nut on the

probe connector.

Disconnect the probe and then

connect the probe again

Software not

updated to most

current version

To download the most current

version of the software, refer to

the applicable product page on

the manufacturer's website.

Problem with probe Connect a different IntelliCAL

probe to verify if problem is with

probe or meter

Probe Not Supported Probe disconnected

or connected

improperly

Tighten the locking nut on the

probe connector.

Disconnect the probe and then

connect the probe again.

Software not

updated to most

current version

To download the most current

version of the software, refer to

the applicable product page on

the manufacturer's website.

Problem with probe Connect a different IntelliCAL

probe to the meter to verify if

problem is with the meter or the

probe.

HQd meter does not

support IntelliCAL

probe

Contact Technical Support.

Bootloader

X.X.XX.XX error

Software not

updated to most

current version.

To download the most current

version of the software, refer to

the applicable product page on

the manufacturer's website.

Error/Warning Description Solution

0 days remaining

message (For LDO

and LBOD only)

LDO or LBOD

sensor cap used for

365 days

Replace the LDO or LBOD

sensor cap and iButton

®

.

There are 0 days

remaining in the life

of the LDO sensor

cap.

Replace the LDO sensor cap.

Calibration will be allowed.

However, the calibration icon

and question mark will appear on

the measurement screen even if

the calibration has passed.

Meter set to

incorrect date and

time

1. Disconnect the probe from

the meter.

2. Remove the meter batteries.

3. Install the meter batteries

properly. Follow the polarity

makings.

4. Set correct date and time in

the meter.

5. Connect the probe and verify

that message has been

removed.

Software not

updated to most

current version

To download the most current

version of the software, refer to

the applicable product page on

the manufacturer's website.

Meter not configured Software error(s) If the meter starts up correctly,

back up the Data Log and

Method files.

To download the most current

version of the software, refer to

the applicable product page on

the manufacturer's website.

16 English

Error/Warning Description Solution

Meter will not power

on or powers on

intermittently

Batteries are not

installed correctly

Examine battery orientation to

make sure the batteries follow

the polarity markings. Test again.

Clean the battery terminals, then

install new batteries.

Connect AC power adapter and

test again.

Software not

updated to most

current version

To download the most current

version of the software, refer to

the applicable product page on

the manufacturer's website.

Damaged meter Contact Technical Support.

Unable to access

Full Access Options

screen

Correct password

has not been

entered

Contact Technical Support.

Unable to access

Full or Operator

Access Options

screen

Software not

updated to most

current version

To download the most current

version of the software, refer to

the applicable product page on

the manufacturer's website.

English 17

Inhaltsverzeichnis

Technische Daten auf Seite 18

Allgemeine Informationen auf Seite 18

Installation auf Seite 21

Benutzeroberfläche und Navigation

auf Seite 23

Inbetriebnahme auf Seite 24

Standardbetrieb auf Seite 25

Datenmanagement auf Seite 26

Wartung auf Seite 30

Fehlersuche und -behebung

auf Seite 30

Technische Daten

Änderungen vorbehalten.

Technische Daten Details

Abmessungen 19,7 x 9,5 cm

Gewicht 335 g ohne Batterien; 430 g mit vier

Alkalibatterien der Größe AA/LR6

Gerätegehäuse IP67, wasserdicht für 30 Minuten bei 1 m

Batteriegehäuse Wasserbeständig für 15 Sekunden bis 0,6 m

Spannungsversorgung (intern) Alkalibatterien oder aufladbare

Nickelmetallhydrid-Akkus (NiMH) (4);

Batteriestandzeit: bis 200 Stunden

Spannungsversorgung

(extern)

Externer Netzadapter gemäß Klasse II: 100 bis

240 VAC, Eingang: 50/60 Hz, Ausgang: 4,5 bis

7,5 VDC (7 VA)

Schutzklasse des

Messgerätes

Klasse I

Lagertemperatur – 20 bis +60°C

Betriebstemperatur 0 bis + 60°C

Feuchte bei Betrieb 90% (nicht-kondensierend)

5-poliger Eingangsstecker M12-Steckverbinder für IntelliCAL

™

-Sonden

Technische Daten Details

8-poliger Eingangsstecker Der 8-polige Stecker ermöglicht den Anschluss

von USB-Geräten und externen Netzteilen

USB/DC-Adapter Peripheriergeräte und Host

Datenspeicher (intern) 500 Ergebnisse

Datenspeicherung Automatisch bei manueller Messung und bei

Intervallmessung, manuell bei kontinuierlicher

Messung.

Datenexport USB-Anschluss zum PC bzw. zu einem USB-

Speichergerät (beschränkt auf die Kapazität

des Speichergerätes). Übertragen wird der

gesamte Datenspeicher oder die aktuellen

Daten bei der Messung.

Anschlüsse Integrierter USB-Anschluss A (für USB-Flash-

Speichergerät, Drucker, Tastatur) und

integrierter USB-Anschluss B (für PC)

Temperaturkorrektur Aus, automatisch und manuell

(parameterabhängig)

Sperren der Messanzeige Kontinuierliche Messung, Intervallmessung oder

manuelle Messung. Mittelwertfunktion für LDO-

Sonden.

Tastatur Externe PC-Tastatur an USB/DC-

Adapteranschluss anschließbar

Zusätzliche Informationen

Zusätzliche Informationen finden Sie auf der Website des Herstellers.

Allgemeine Informationen

Der Hersteller ist nicht verantwortlich für direkte, indirekte,

versehentliche oder Folgeschäden, die aus Fehlern oder

Unterlassungen in diesem Handbuch entstanden. Der Hersteller behält

sich jederzeit und ohne vorherige Ankündigung oder Verpflichtung das

Recht auf Verbesserungen an diesem Handbuch und den hierin

18

Deutsch

beschriebenen Produkten vor. Überarbeitete Ausgaben der

Bedienungsanleitung sind auf der Hersteller-Webseite erhältlich.

Sicherheitshinweise

H I N W E I S

Der Hersteller ist nicht für Schäden verantwortlich, die durch Fehlanwendung

oder Missbrauch dieses Produkts entstehen, einschließlich, aber ohne

Beschränkung auf direkte, zufällige oder Folgeschäden, und lehnt jegliche

Haftung im gesetzlich zulässigen Umfang ab. Der Benutzer ist selbst dafür

verantwortlich, schwerwiegende Anwendungsrisiken zu erkennen und

erforderliche Maßnahmen durchzuführen, um die Prozesse im Fall von möglichen

Gerätefehlern zu schützen.

Bitte lesen Sie dieses Handbuch komplett durch, bevor Sie dieses Gerät

auspacken, aufstellen oder bedienen. Beachten Sie alle Gefahren- und

Warnhinweise. Nichtbeachtung kann zu schweren Verletzungen des

Bedieners oder Schäden am Gerät führen.

Stellen Sie sicher, dass die durch dieses Messgerät bereitgestellte

Sicherheit nicht beeinträchtigt wird. Verwenden bzw. installieren Sie das

Messsystem nur wie in diesem Handbuch beschrieben.

Bedeutung von Gefahrenhinweisen

G E F A H R

Kennzeichnet eine mögliche oder drohende Gefahrensituation, die, wenn sie

nicht vermieden wird, zum Tod oder zu schweren Verletzungen führt.

W A R N U N G

Kennzeichnet eine mögliche oder drohende Gefahrensituation, die, wenn sie

nicht vermieden wird, zum Tod oder zu schweren Verletzungen führen kann.

V O R S I C H T

Kennzeichnet eine mögliche Gefahrensituation, die zu geringeren oder

moderaten Verletzungen führen kann.

H I N W E I S

Kennzeichnet eine Situation, die, wenn sie nicht vermieden wird, das Gerät

beschädigen kann. Informationen, die besonders beachtet werden müssen.

Warnhinweise

Lesen Sie alle am Gerät angebrachten Aufkleber und Hinweise.

Nichtbeachtung kann Verletzungen oder Beschädigungen des Geräts

zur Folge haben. Im Handbuch werden auf die am Gerät angebrachten

Symbole in Form von Warnhinweisen verwiesen.

Dieses Symbol am Gerät weist auf Betriebs- und/oder

Sicherheitsinformationen im Handbuch hin.

Dieses Symbol gibt an, dass die bezeichnete Stelle heiß werden

kann und deswegen ohne entsprechende Schutzvorkehrungen nicht

berührt werden sollte.

Elektrogeräte, die mit diesem Symbol gekennzeichnet sind, dürfen

nicht im normalen öffentlichen Abfallsystem entsorgt werden. Senden

Sie Altgeräte an den Hersteller zurück. Dieser entsorgt die Geräte

ohne Kosten für den Benutzer.

Produktübersicht

Die tragbaren Messgeräte der Serie HQd werden mit den digitalen

IntelliCAL

™

-Sonden zur Messung verschiedener Parameter im Wasser

eingesetzt. Das Messgerät erkennt automatisch die Art der

angeschlossenen Sonde. Messwertdaten können gespeichert und an

einen Drucker, einen PC oder ein USB-Speichergerät übertragen

werden.

Die HQd-Serie besteht aus vier Gerätemodellen:

• HQ11d – pH/mV/ORP

• HQ14d – Leitfähigkeit, Salzgehalt, Summe gelöster Salze (TDS),

Volumenwiderstand

• HQ30d – alle IntelliCAL-Sonden, 1 Sondenstecker

• HQ40d – alle IntelliCAL-Sonden, 2 Sondenstecker

Gemeinsame Merkmale aller Modelle

• Automatische Sonden- und Parametererkennung

Deutsch

19

• Menügesteuerte Kalibrierung

• In der Sonde gespeicherte Kalibrierungsdaten

• Sondenspezifische Verfahrenseinstellungen zur Einhaltung

gesetzlicher Vorschriften und allgemein anerkannter Arbeitsabläufe im

Labor

• Sicherheitsoptionen

• Echtzeit-Datenaufzeichnung über den USB-Anschluss

• USB-Anschluss für PC/Drucker/USB-Speichergerät/Tastatur

• Bidirektionale Kommunikation mit PC-Systemen über eine virtuelle

serielle Verbindung

• Proben-ID und Bediener-ID sorgen zur Rückführbarkeit der Daten

• Einstellbare automatische Abschaltung

Produktkomponenten

Überprüfen Sie anhand von Abbildung 1 und Abbildung 2 die

Vollständigkeit der Lieferung. Wenn irgendwelche Positionen fehlen oder

beschädigt sind, kontaktieren Sie bitte den Hersteller oder Verkäufer.

Abbildung 1 Komponenten des Messgerätes (Modell HQ40d)

1 Messgerät 4 AC/DC-Netzteil

2 AA-Batterien (4 Stück) 5 USB/DC-Adapter

3 Netzkabel

Abbildung 2 Komponenten der Messgerätemodelle HQ11d, HQ14d

und HQ30

1 Messgerät 2 AA-Batterien (4 Stück)

20 Deutsch

A página está carregando ...

Hach HQ40d Basic User Manual

Este manual também é adequado para

Hach HQ40d Basic User Manual

em outros idiomas

Artigos relacionados

Outros documentos