Yamaha UX256 Manual do usuário

Marca: Yamaha

Modelo: UX256

Categoria: Caixas de comutação seriais

Tipo: Manual do usuário

USB-MIDI INTERFACE

Owner’s Manual

Bedienungsanleitung

Mode d’emploi

EnglishDeutschFrançais

This product utilizes batteries or an external power supply

(adapter). DO NOT connect this product to any power

supply or adapter other than one described in the manual,

on the name plate, or specifically recommended by

Yamaha.

WARNING: Do not place this product in a position

where anyone could walk on, trip over ,or roll anything

over power or connecting cords of any kind. The use of an

extension cord is not recommended! IF you must use an

extension cord, the minimum wire size for a 25' cord (or

less ) is 18 AWG. NOTE: The smaller the AWG number

,the larger the current handling capacity. For longer

extension cords, consult a local electrician.

This product should be used only with the components

supplied or; a cart, rack, or stand that is recommended by

Yamaha. If a cart, etc., is used, please observe all safety

markings and instructions that accompany the accessory

product.

SPECIFICATIONS SUBJECT TO

CHANGE:

The information contained in this manual is believed to be

correct at the time of printing. However, Yamaha reserves

the right to change or modify any of the specifications

without notice or obligation to update existing units.

This product, either alone or in combination with an

amplifier and headphones or speaker/s, may be capable

of producing sound levels that could cause permanent

hearing loss. DO NOT operate for long periods of time at

a high volume level or at a level that is uncomfortable. If

you experience any hearing loss or ringing in the ears,

you should consult an audiologist.

IMPORTANT: The louder the sound, the shorter the time

period before damage occurs.

Some Yamaha products may have benches and / or

accessory mounting fixtures that are either supplied with

the product or as optional accessories. Some of these

items are designed to be dealer assembled or installed.

Please make sure that benches are stable and any

optional fixtures (where applicable) are well secured

BEFORE using.

Benches supplied by Yamaha are designed for seating

only. No other uses are recommended.

NOTICE:

Service charges incurred due to a lack of knowledge

relating to how a function or effect works (when the unit is

operating as designed) are not covered by the

manufacturer’s warranty, and are therefore the owners

responsibility. Please study this manual carefully and

consult your dealer before requesting service.

ENVIRONMENTAL ISSUES:

Yamaha strives to produce products that are both user

safe and environmentally friendly. We sincerely believe

that our products and the production methods used to

produce them, meet these goals. In keeping with both the

letter and the spirit of the law, we want you to be aware of

the following:

PLEASE KEEP THIS MANUAL

Battery Notice:

This product MAY contain a small non-rechargeable

battery which (if applicable) is soldered in place. The

average life span of this type of battery is approximately

five years. When replacement becomes necessary, contact

a qualified service representative to perform the replace-

ment.

This product may also use “household” type batteries.

Some of these may be rechargeable. Make sure that the

battery being charged is a rechargeable type and that the

charger is intended for the battery being charged.

When installing batteries, do not mix batteries with new, or

with batteries of a different type. Batteries MUST be

installed correctly. Mismatches or incorrect installation may

result in overheating and battery case rupture.

Warning:

Do not attempt to disassemble, or incinerate any battery.

Keep all batteries away from children. Dispose of used

batteries promptly and as regulated by the laws in your

area. Note: Check with any retailer of household type

batteries in your area for battery disposal information.

Disposal Notice:

Should this product become damaged beyond repair, or for

some reason its useful life is considered to be at an end,

please observe all local, state, and federal regulations that

relate to the disposal of products that contain lead,

batteries, plastics, etc. If your dealer is unable to assist

you, please contact Yamaha directly.

NAME PLATE LOCATION:

The name plate is located on the top panel of the product.

The name plate lists the product’s model number, power

requirements, and other information. The serial number is

located on the rear panel. Please record the model

number, serial number, and date of purchase in the spaces

provided below, and keep this manual as a permanent

record of your purchase.

Model

Serial No.

Purchase Date

92-BP (others)

SPECIAL MESSAGE SECTION

PRECAUTIONS

PLEASE READ CAREFULLY BEFORE PROCEEDING

* Please keep these precautions in a safe place for future reference.

WARNING

Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from

electrical shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited

to, the following:

• Do not open the instrument or attempt to disassemble

the internal parts or modify them in any way. The

instrument contains no user-serviceable parts. If it should

appear to be malfunctioning, discontinue use

immediately and have it inspected by qualified Yamaha

service personnel.

• Do not expose the instrument to rain, use it near water

or in damp or wet conditions, or place containers on it

containing liquids which might spill into any openings.

• If the AC adaptor cord or plug becomes frayed or

damaged, or if there is a sudden loss of sound during

use of the instrument, or if any unusual smells or smoke

should appear to be caused by it, immediately turn off

the power switch, disconnect the adaptor plug from the

outlet, and have the instrument inspected by qualified

Yamaha service personnel.

• Use the specified adaptor (PA-3B or an equivalent

recommended by Yamaha) only. Using the wrong

adaptor can result in damage to the instrument or

overheating.

• Before cleaning the instrument, always remove the

electric plug from the outlet. Never insert or remove an

electric plug with wet hands.

• Check the electric plug periodically and remove any dirt

or dust which may have accumulated on it.

CAUTION

Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or

damage to the instrument or other property. These precautions include, but are not limited to, the following:

• Do not place the AC adaptor cord near heat sources

such as heaters or radiators, and do not excessively

bend or otherwise damage the cord, place heavy objects

on it, or place it in a position where anyone could walk

on, trip over, or roll anything over it.

• When removing the electric plug from the instrument or

an outlet, always hold the plug itself and not the cord.

• Do not connect the instrument to an electrical outlet using

a multiple-connector. Doing so can result in lower sound

quality, or possibly cause overheating in the outlet.

• Unplug the AC power adaptor when not using the

instrument, or during electrical storms.

• Before connecting the instrument to other electronic

components, turn off the power for all components.

Before turning the power on or off for all components,

set all volume levels to minimum. Also, be sure to set

the volumes of all components at their minimum levels

and gradually raise the volume controls while playing

the instrument to set the desired listening level.

• Do not expose the instrument to excessive dust or

vibrations, or extreme cold or heat (such as in direct

sunlight, near a heater, or in a car during the day) to

prevent the possibility of panel disfiguration or damage

to the internal components.

• Do not use the instrument near other electrical products

such as televisions, radios, or speakers, since this might

cause interference which can affect proper operation of

the other products.

• Do not place the instrument in an unstable position where

it might accidentally fall over.

(3)-6

• Before moving the instrument, remove all connected

adaptor and other cables.

• When cleaning the instrument, use a soft, dry cloth. Do

not use paint thinners, solvents, cleaning fluids, or

chemical-impregnated wiping cloths. Also, do not place

vinyl, plastic or rubber objects on the instrument, since

this might discolor the panel or keyboard.

• Do not rest your weight on, or place heavy objects on

the instrument, and do not use excessive force on the

buttons, switches or connectors.

• Use only the rack specified for the instrument. When

attaching the rack, use the provided screws only. Failure

to do so could cause damage to the internal components

or result in the instrument falling over.

• Do not place objects in front of the instrument's air vent,

since this may prevent adequate ventilation of the

internal components, and possibly result in the

instrument overheating.

• Do not operate the instrument for a long period of time

at a high or uncomfortable volume level, since this can

cause permanent hearing loss. If you experience any

hearing loss or ringing in the ears, consult a physician.

Yamaha cannot be held responsible for damage

caused by improper use or modifications to the

instrument, or data that is lost or destroyed.

Always turn the power off when the instrument is not in use.

Welcome to the UX256

Thank you for choosing the Yamaha UX256 USB-MIDI interface. The UX256 is a MIDI

interface that features fast data transfer via USB connection and simultaneous playback

of up to 256 channels. Connect the UX256 to a computer that has a USB terminal and

enjoy the powerful features of digital music.

Please read this owner’s manual thoroughly to make the best use of the UX256. After

you read this manual, please keep it in a safe place for future reference.

Table of contents

UX256 Features ................................................................................... 5

Notes on USB ................................................................................................ 6

Package Contents ............................................................................... 7

About the included software .......................................................................... 7

System Requirements ......................................................................... 8

Specifications ...................................................................................... 8

Parts and Functions.............................................................................9

Connection........................................................................................10

Installing the Driver .......................................................................... 13

Installing the driver on a Windows 98 system .............................................. 14

Installing the driver on a Macintosh system.................................................. 18

Changing the driver setting (MIDI Patch Screen) ........................... 24

Troubleshooting (FAQ)..................................................................... 30

SPECIAL NOTICES

• Do not attempt to play the supplied CD-ROM on an audio CD player. Doing so

many result in irreparable damage to your audio CD player.

• The company names and product names in this Owner’s Manual are the trademarks

or registered trademarks of their respective companies.

• The screen displays as illustrated in this Owner’s Manual are for instructional pur-

poses, and may appear somewhat different from the screens which appear on your

computer.

UX256 Features

• 256-channel Simultaneous Playback

You can use six MIDI IN/OUT ports and two TO TG ports (equivalent to serial ports

on a computer) simultaneously. In this way, you can build a powerful music produc-

tion environment with 16 MIDI OUT ports (256 channels) and eight MIDI IN ports

(128 channels).

• Easy Hot Swap Connection

With a USB connection, you can connect and disconnect the USB cable while the

power to the computer is on. You don’t need to make complicated settings, such as

for a driver.

• USB Fast Data Transfer

Very quick response during multi-port simultaneous performance thanks to the USB

connection.

• Supports Windows 98 and Macintosh environments

The Windows 98 driver and Macintosh driver are provided to support Windows 98

and Macintosh (USB-supported iMac, G3, G4, etc.) environments.

• Connect up to 32 UX256s

USB hubs enable you to connect up to 32 UX256s, offering up to 512 ports for MIDI

OUT and up to 256 ports for MIDI IN.

These numbers vary depending on the operating environment.

• Stable Operation

The power is supplied via a power adaptor, which ensures stable operation.

USB

USB is an abbreviation for Universal Serial Bus. It is a serial interface for connecting

a computer with peripheral devices, and enables much faster data transfer

(12Mbps) compared to conventional serial port connections. Also, it allows “hot

swapping” (connecting peripheral devices while the power to the computer is

on).

NOTE

Don’t turn the power to the UX256 on or off, or connect or disconnect a USB cable

under any of the following conditions. Otherwise, the computer may lock up or

UX256 functions may be disabled:

• The computer is checking the device or loading the driver.

• The computer is starting or quitting the OS.

• The computer is in Save Energy (Sleep) mode.

• A MIDI application program is starting up.

Also, don’t perform any of the following operations. Otherwise, the computer may

lock up or the UX256 functions may be disabled:

• Do not frequently turn on and off the power to the UX256 or connect and

disconnect the cable.

• Do not place the computer in Save Energy (Sleep) mode or cancel the

mode during MIDI data transfer.

• Do not connect or disconnect the USB cable while the UX256 is on.

• Do not turn the power to the UX256 on or off, start the computer, or install

the driver while a large quantity of data is being transferred.

Notes on USB

Package Contents

The UX256 package contains the following items. Check the contents for missing

items.

• USB-MIDI interface (UX256 main unit)

• Power adaptor (PA-3B)

(The power adaptor may not be included in the package in some areas.)

• CD-ROM (Windows98/Macintosh hybrid CD)

• USB cable (approx. 2m)

• Owner’s manual (this book)

The included CD-ROM contains the following software (driver).

[Windows 98]

• USB-MIDI driver (YAMAHA USB-MIDI Driver)

You need this driver to operate the UX256. See page 14 for information on installing

the driver.

[Macintosh]

• OMS

This is a MIDI driver for Macintosh provided by Opcode Systems. See page 18 and

the included “OMS_2.3_Mac.pdf” OMS manual for information on installing and

using the driver.

• USB-MIDI Driver (YAMAHA USB-MIDI Driver)

You need this driver to operate the UX256.

Be sure to install the OMS driver ﬁrst, then install this driver. See page 18 for infor-

mation on installing the driver.

About the included software

System Requirements

[Windows 98]

OS: Windows 98

Windows 95 is not supported.

Computer: USB-supported IBM-PC or compatible computer

CPU: Pentium 166MHz or higher

Memory: 32MB or higher

Hard Disk: 2MB or more of free space

[Macintosh]

OS: MacOS 8.5 or higher

Computer: iMac, USB-supported Power Macintosh G3 or G4

With some iMac models, you need to install “iMac Update 1.1” pro-

vided by Apple Computer. This program improves the USB soft-

ware. For more information, visit the Apple Computer web site

(www.apple.com).

Memory: 64MB or higher

Turn off virtual memory.

Hard Disk: 2MB or more of free space

Other: OMS version 2.3.6 or later (included in the CD-ROM in the package)

Speciﬁcations

Jack and Terminals: MIDI IN terminals (1-6), MIDI OUT terminals (1-6), TO TG termi-

nals (1, 2), USB terminal, DC IN jack

Power Supply: Power adaptor (PA-3B)

Dimensions: 220 (W) X 110 (D) X 45 (H) [mm]

Weight: 650g

Option: 8-pin Peripheral cable for Apple Macintosh

• Speciﬁcations and descriptions in this Owner’s Manual are for information purposes only.

Yamaha Corp. reserves the right to change or modify products or speciﬁcations at any time

without prior notice. Since speciﬁcations, equipment or options may not be the same in every

locale, please check with your Yamaha dealer.

NOTE

Parts and Functions

Front panel

Rear panel

A ON/STANDBY switch

Press this switch to turn the power to

the UX256 on or off (standby).

Even when the power is off

(standby), a small current ﬂows

through the unit. If you plan not to

use the UX256 for a long period

of time, be sure to remove the

power adaptor from the AC outlet.

B POWER LED

This indicator lights up when the power

to the UX256 is turned on.

C USB LED

This indicator lights up when the UX256

is connected to the computer and ready

for use. It flashes when the UX256

receives or transmits MIDI signals.

D TO TG terminals 1 and 2

Connect these terminals to the TO HOST

terminals on the MIDI devices. Use an

optional 8-pin system peripheral cable for

Apple Macintosh for connection.

Set the HOST SELECT switch

of the connected MIDI device

to “PC-1” or “Mac” regardless

of the computer you are using.

E MIDI terminals 1-6

Connect MIDI devices to these terminals

using MIDI cables.

MIDI IN: Receives MIDI signals.

MIDI OUT: Transmits MIDI signals.

F USB terminal

Connect this terminal to a computer or

a USB hub using a USB cable.

G DC IN jack

Connect the PA-3B power adaptor here.

Before connecting the power

adaptor, make sure that the

power ON/STANDBY switch on

the unit is set to off (standby).

Connect the power adaptor to the

DC IN jack, then plug the adaptor

into the AC outlet.

4321 5

467

NOTE

Connection

This chapter explains how to connect MIDI devices, such as a tone generator and a

MIDI Keyboard, to the UX256.

(1) Connecting the included power adaptor

1. Set the ON/STANDBY switch on the UX256 to off (standby).

2. Connect the plug of the power adaptor (PA-3B) to the DC IN jack on the

rear panel of the UX256.

3. Connect the power adaptor to the appropriate AC outlet.

Be sure to use the PA-3B power adaptor or equivalent recommended by

YAMAHA. Using a power adaptor with different current, voltage, or polarity

speciﬁcations may cause a malfunction. If you plan not to use the UX256

for a long period of time, be sure to remove the power adaptor from the AC

outlet.

Before you turn on the power to the UX256, make sure that the computer

and the UX256 are connected correctly.

Power

adaptor

computer

TO HOST

terminal

MIDI

terminal

UX256

(2)

(1)

(4)

(3)

power adaptor

(PA-3B)

AC Outlet

UX256

NOTE

Connection

(2) Connecting a computer

Connect the USB terminal of a computer to the USB terminal of the UX256 using a

USB cable. Be sure to turn off the power to the UX256 before making the connection.

For this connection, you do not have to turn off the power to the computer.

(3) Connecting the TO TG terminal to a MIDI device

Connect the TO HOST terminal of a MIDI device to the TO TG terminal of the UX256

using an optional serial cable (8-pin Macintosh Peripheral cable). At this time, set the

HOST SELECT switch of the MIDI device to “PC-1” or “Mac” regardless of the

computer you are using.

When you are using the TO TG terminal, you can use 5 MIDI OUT ports and 1 MIDI IN

port to control the connected MIDI device.

(4) Connecting the MIDI terminals to a MIDI device

Use optional MIDI cables to connect the MIDI IN terminal of the MIDI device to the

MIDI OUT terminal of the UX256. Also, connect the MIDI OUT terminal of the MIDI

device to the MIDI IN terminal of the UX256. At this time, set the HOST SELECT switch

of the MIDI device to “MIDI.”

NOTE

computer

USB cable

UX256

serial cable

Set the HOST SELECT switch

on the rear panel to “PC-1” or

“Mac.”

UX256

MIDI device

Set the HOST SELECT

switch on the rear panel to

“MIDI.”

MIDI cable

MIDI device

UX256

Connection

(5) Connecting USB hubs

If you need more USB terminals on the computer to control multiple UX256s

simultaneously, you can use USB hubs. As shown in the figure, connect a computer to

a USB hub, and the USB hub to multiple UX256s using USB cables. You can connect

up to 32 UX256s.

USB hub

A USB hub is a device used to expand the number of USB terminals. Using a USB

hub will increase the number of available USB terminals, enabling you to connect

many USB-supported devices as well as multiple UX256s.

computer

UX256

USB hub

Installing the Driver

To operate the UX256, you need to install the driver on the computer correctly.

USB-MIDI driver is software that transmits MIDI signals back and forth between

sequence software and the UX256 via a USB cable.

If you are using a Macintosh computer, you also need to install the OMS driver

(page 18) as well as the USB-MIDI driver.

The installation procedure differs between Windows 98 and Mac OS. Proceed to

page 18 for installation instruction for a Macintosh computer.

Windows 98

Macintosh

UX256

computer

sequence

software

driver

USB cable

UX256

computer

sequence

software

driver

OMS

USB cable

Installing the Driver

• Follow the steps below to install the driver.

1. Start the computer.

2. Make sure that the power to the UX256 is turned off (standby). Connect

the USB terminal of the computer or the USB hub to the USB terminal of

the UX256 using the included USB cable.

3. Turn on the power to the UX256.

The system displays the “Add New Hardware Wizard.”

4. Click [Next].

The system displays a screen that enables you to select search method.

Installing the driver on a Windows 98 system

Installing the Driver

5. Check the radio button to the left of “Search for the best driver for your

device. (Recommended).”

The system displays a screen that enables you to select a location in

which to install the driver.

6. Insert the included CD-ROM into the CD-ROM drive.

After making sure that the system recognizes the CD-ROM, check the

“CD-ROM drive” box and uncheck all other items. Click [Next].

The system may ask you to insert a Windows CD while it checks for the

driver. Specify the root folder of the CD-ROM drive (such as D:\) and con-

tinue installation.

7. When the system detects the driver in the CD-ROM and is ready for

installation, it displays the following screen.

Make sure that the “YAMAHA USB MIDI Driver” is listed, and click

[Next].

The system starts installation.

NOTE

Installing the Driver

8. When installation is complete, the following screen appears.

Click [Finish].

Some computers may take about ten seconds to show this screen after

installation is complete.

The driver has been installed.

• Checking the installation

Follow the steps below to make sure the driver has been installed correctly.

1. Double-click “System” in the Control Panel to open the System Properties

window.

2. Click the “Device Manager” tab and check to see if “YAMAHA USB MIDI

Driver”

is listed.

NOTE

Installing the Driver

• Selecting the destination for the MIDI signal output

This section explains how to set up the UX256 for use with Media Player (included in

Windows 98) or an equivalent program. For information on setting up your sequence

software, refer to the owner’s manual for the software.

1. Click “Multimedia” in the Control Panel to open the Multimedia Proper-

ties window.

2. Click the “MIDI” tab and check to see if “Yamaha USB OUT xx-yy” is listed.

“xx” means the device number (page 26) and “yy” means the port number

(page 24). If only one UX256 is connected, the device number is “0.”

3. While “Single instrument” is selected, select a driver according to the

port number of the connected tone generator, and click [OK].

• Connecting multiple UX256s

Follow the steps below to connect two or more UX256s. You do not need to install the

driver again.

1. Start the computer.

2. Make sure the power to the UX256s is turned off (standby). Connect the

USB terminal of the computer or the USB hub to the USB terminal on the

UX256s using the USB cables.

3. Turn on the power to the UX256s.

When you turn on the power to connected multiple UX256s, the device

number is assigned, starting with 0, to the units in the order in which you

turn on the power. If you turn on the power to all units simultaneously, the

device number is assigned based on the order of the port numbers of the

USB hub. However, this order may change depending on the hub.

NOTE

Installing the Driver

First install OMS before you install the driver. Also, after installing the driver, you will

need to set up OMS (page 20).

(1) Installing OMS

1. Start the computer.

2. Insert the included CD-ROM into the CD-ROM drive. The system dis-

plays the CD-ROM icon on the desktop.

3. Double-click the CD-ROM icon and double-click the “Install OMS 2.3.6”

icon in the “OMS” folder.

Follow the instructions on the screen to install OMS. For more information on

installing and using OMS, refer to the included “OMS_2.3_Mac.pdf” manual.

(2) Installing the USB driver

1. Start the computer.

2. Insert the included CD-ROM into the CD-ROM drive.

3. Double-click the CD-ROM icon and double-click the “Install USB Driver”

icon to display the following installation screen.

Installing the driver on a Macintosh system

Installing the Driver

4. The “Install Location” box displays the destination of the installation. If

you wish to change the destination disk or folder, use the [Switch Disk]

button and the pop-up menu to specify the desired destination.

This box usually displays the start-up disk as the destination.

5. Click the [Install] button. The system displays the following message:

“This installation requires your computer to restart after installing this soft-

ware. Click Continue to automatically quit all other running applications.”

Click [Continue].

6. The installation starts. If the driver has already been installed, you will

receive the following message. To return to step 3, press [Continue]. To

complete the installation, click [Quit].

7. When the installation is complete, the system displays the following mes-

sage: “Installation was successful. You have installed software which

requires you to restart your computer.”

Click [Restart]. The computer auto-

matically restarts.

You can locate the installed files in the following locations:

• System Folder | Control Panels | YAMAHA USB MIDI Patch

• System Folder | Extensions | USB YAMAHA MIDI Driver

• System Folder | OMS Folder | YAMAHA USB MIDI OMS Driver

NOTE

Installing the Driver

(3) Setting up the OMS driver

1. Start the computer.

2. Make sure that the power to the UX256 is turned off (standby). Then

connect the USB terminal of the computer or the USB hub to the USB

terminal of the UX256.

3. Turn on the power to the UX256. Make sure the red POWER LED and

green USB LED on the UX256 light up steadily.

4. Open the “OMS Applications” folder in the “Opcode” folder installed on

the hard disk, and double-click the “OMS Setup” icon to start the setup

program.

5. If the AppleTalk dialog appears, click [Turn It Off], then click [OK] in the

subsequent dialog box.

6. The system displays the “Create a New Studio Setup” dialog box. If this

dialog box does not appear, select “New Studio Setup” from the “File”

menu.

A página está carregando...

Yamaha UX256 Manual do usuário

Marca: Yamaha

Modelo: UX256

Categoria: Caixas de comutação seriais

Tipo: Manual do usuário

Baixar PDF

relatório

em outras línguas

español: Yamaha UX256 Manual de usuario
français: Yamaha UX256 Manuel utilisateur
italiano: Yamaha UX256 Manuale utente
English: Yamaha UX256 User manual
русский: Yamaha UX256 Руководство пользователя
Nederlands: Yamaha UX256 Handleiding
Deutsch: Yamaha UX256 Benutzerhandbuch
dansk: Yamaha UX256 Brugermanual
čeština: Yamaha UX256 Uživatelský manuál
svenska: Yamaha UX256 Användarmanual
polski: Yamaha UX256 Instrukcja obsługi
Türkçe: Yamaha UX256 Kullanım kılavuzu
suomi: Yamaha UX256 Ohjekirja
română: Yamaha UX256 Manual de utilizare

Yamaha UX256 Manual do usuário

Yamaha UX256 Manual do usuário

em outras línguas

Artigos relacionados

Outros documentos